Bitcoin Forum
September 20, 2018, 05:47:53 PM *
News: ♦♦ Bitcoin Core users must update to 0.16.3 [Torrent]. More info.
 
   Home   Help Search Donate Login Register  
Pages: « 1 2 3 4 5 6 7 8 [9]  All
  Print  
Author Topic: [Guide] Dogie's Comprehensive SpondooliesTech SP10 Setup [HD]  (Read 28673 times)
sidehack
Legendary
*
Online Online

Activity: 1820
Merit: 1151

Curmudgeonly hardware guy


View Profile
August 22, 2016, 05:17:49 PM
 #161

As long as it's compatible - pinout, signals, physical size etc it should be fine. The 1200W rating is the maximum power it'll output, not a fixed requirement that will blow up your miner with too much juice.

Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
dogie
Legendary
*
Offline Offline

Activity: 1526
Merit: 1050


dogiecoin.com


View Profile WWW
August 22, 2016, 06:20:26 PM
 #162

As long as it's compatible - pinout, signals, physical size etc it should be fine. The 1200W rating is the maximum power it'll output, not a fixed requirement that will blow up your miner with too much juice.

Yup. If you're in doubt about compatibility past the gold finger pinout you can set the miner to use a 'generic PSU' so it won't try and talk to it.

Zekeman
Newbie
*
Offline Offline

Activity: 23
Merit: 0


View Profile
August 24, 2016, 08:58:29 PM
 #163

As long as it's compatible - pinout, signals, physical size etc it should be fine. The 1200W rating is the maximum power it'll output, not a fixed requirement that will blow up your miner with too much juice.

Thanks for the advice!!

hiddencow
Newbie
*
Offline Offline

Activity: 2
Merit: 0


View Profile
February 10, 2017, 01:07:09 AM
 #164

hay Dogie i know this is late but i just got 2 of these miners for low $ and i tried to set it up and it has an ip of 192.168.7.x and subnet of 255.255.0.0 and my internet has 10.0.0.x ip's and subnet of 255.255.255.224 and i changed it in the settings and now i cant find it on my router or when i try to connect i cant find it is there any way to fix it? or am i just RIP
darkwarshadow
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
February 17, 2017, 06:00:13 PM
 #165

hay Dogie i know this is late but i just got 2 of these miners for low $ and i tried to set it up and it has an ip of 192.168.7.x and subnet of 255.255.0.0 and my internet has 10.0.0.x ip's and subnet of 255.255.255.224 and i changed it in the settings and now i cant find it on my router or when i try to connect i cant find it is there any way to fix it? or am i just RIP

Hiddencow its do able I have two connected to my ISP modem, if you connected them a Comcast modem you may not be able to just plug and play. If they are plugged in to the modem, SP10 is powered on then type its IP address in your browser 192.168.7.xxx should connect you, if it asks for the username//password your done if not than you'll have to do what I did. First have another router connect everything up to it, access the router 192.168.1.1 change its IP address to 192.168.7.1 , once complete the SP10's should be accessible by typing their IP address in your browser 192.168.7.xxx, once you access the Dawson manager go into setting and change the network setup to DHCP. This will allow the IP address to auto address on your main network ie 10.0.0.x

Hope this helps a little
DWS
Pages: « 1 2 3 4 5 6 7 8 [9]  All
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!