-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 17, 2014, 02:39:48 PM |
|
- cgminer uses its own version of the HID driver (Zadig). So in order to use cgminer you have to trick Windows to replace the driver for a particular device with Zadig's. I hate to be pedantic but this is not quite true. The device talks USB while HID is a driver designed for user interface devices like keyboards and mice, so when using software that uses this driver, it goes device -> usb -> hid driver -> software. Zadig is not actually a driver; it's a utility to tell windows to remove the driver and use the microsoft direct usb communication protocol (effectively a Microsoft driver called WinUSB). So while WinUSB appears to be a "driver" it's actually telling windows to just give the raw usb data to the software. So software that uses WinUSB (like cgminer which uses it for every single USB device) is talking directly to the usb device, bypassing the need for any driver, so it is going device -> usb -> cgminer. Having said that, we don't have support for 2+ chip nanofury based devices, but VS3 is kindly sending me some devices to add support to cgminer, thanks!
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
vs3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 17, 2014, 09:47:03 PM |
|
Con - thanks for the clarification! That's actually much better than mine! (which was rather simplified when it shouldn't have been as much)
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 02:12:22 AM |
|
Reminder to all to make sure you are only using the OP link for Bfgminer. Other versions do not work (yet).
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 19, 2014, 02:27:09 AM |
|
Also - if you are interested in the NF6 (11-12 Gh/s)you can order them via our Assembly thread at https://bitcointalk.org/index.php?topic=545507.0This is the only way to get a Nano Fury 6 until some in our group start selling them after our assembly service is complete. We will be closing the group and starting PCB production next week. Minimum order of 8 required. Please add any questions to the Assembly thread (not this one) or PM me. Thanks!!
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 23, 2014, 11:52:47 PM |
|
Bump
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 25, 2014, 04:51:15 AM |
|
Major price reduction. See OP. ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
|
ptr727
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 04, 2014, 04:32:08 PM |
|
- cgminer uses its own version of the HID driver (Zadig). So in order to use cgminer you have to trick Windows to replace the driver for a particular device with Zadig's. I hate to be pedantic but this is not quite true. The device talks USB while HID is a driver designed for user interface devices like keyboards and mice, so when using software that uses this driver, it goes device -> usb -> hid driver -> software. Zadig is not actually a driver; it's a utility to tell windows to remove the driver and use the microsoft direct usb communication protocol (effectively a Microsoft driver called WinUSB). So while WinUSB appears to be a "driver" it's actually telling windows to just give the raw usb data to the software. So software that uses WinUSB (like cgminer which uses it for every single USB device) is talking directly to the usb device, bypassing the need for any driver, so it is going device -> usb -> cgminer. Having said that, we don't have support for 2+ chip nanofury based devices, but VS3 is kindly sending me some devices to add support to cgminer, thanks! I just tried 4.3.3, still running at half speed. Any indications of when CGMiner will support full speed for NF2's?
|
|
|
|
vs3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 05, 2014, 06:50:52 AM |
|
Any indications of when CGMiner will support full speed for NF2's?
In case you've missed it: I've added support for NF2 and NF6 into cgminer git master branch. (...) The NF2s are behaving very nicely. This is at --nfu-bits 54: 14: NF2 00001099: | 4.670G / 4.655Gh/s WU: 65.2/m 23: NF2 00000753: | 4.447G / 4.509Gh/s WU: 63.6/m
|
|
|
|
Harlbatr
Newbie
Offline
Activity: 34
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 05, 2014, 10:17:23 AM |
|
is it even worth to buy these ? Will they ever ROI ?
|
|
|
|
btcminer84
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 05, 2014, 10:25:54 AM |
|
5 GH/s at $49.00 USD? This is very expensive. Maybe $8.00 USD and I buy it, if delivery is instant. Will they ever ROI ?
No. It is -$42.00 USD "win" (lost).
|
|
|
|
|
ptr727
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 05, 2014, 07:39:54 PM |
|
Any indications of when CGMiner will support full speed for NF2's?
In case you've missed it: I've added support for NF2 and NF6 into cgminer git master branch. (...) The NF2s are behaving very nicely. This is at --nfu-bits 54: 14: NF2 00001099: | 4.670G / 4.655Gh/s WU: 65.2/m 23: NF2 00000753: | 4.447G / 4.509Gh/s WU: 63.6/m
Thank you, I did miss that. Hmm, windows build instructions here I come. Any known cgminer nightly build resources our there?
|
|
|
|
-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 05, 2014, 09:38:01 PM |
|
Any indications of when CGMiner will support full speed for NF2's?
In case you've missed it: I've added support for NF2 and NF6 into cgminer git master branch. (...) The NF2s are behaving very nicely. This is at --nfu-bits 54: 14: NF2 00001099: | 4.670G / 4.655Gh/s WU: 65.2/m 23: NF2 00000753: | 4.447G / 4.509Gh/s WU: 63.6/m
Thank you, I did miss that. Hmm, windows build instructions here I come. Any known cgminer nightly build resources our there? Here you go: http://ck.kolivas.org/apps/cgminer/temp/cgminer.exe
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
ptr727
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 65
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 06, 2014, 01:48:10 AM |
|
Any indications of when CGMiner will support full speed for NF2's?
In case you've missed it: I've added support for NF2 and NF6 into cgminer git master branch. (...) The NF2s are behaving very nicely. This is at --nfu-bits 54: 14: NF2 00001099: | 4.670G / 4.655Gh/s WU: 65.2/m 23: NF2 00000753: | 4.447G / 4.509Gh/s WU: 63.6/m
Thank you, I did miss that. Hmm, windows build instructions here I come. Any known cgminer nightly build resources our there? Here you go: http[Suspicious link removed] Thank you. I think my hubs are running out of juice now that both chips on the NF2 are being lit up. [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit 0: AMU 0 : | 334.6M / 315.9Mh/s WU: 3.4/m 1: AMU 1 : | 335.5M / 318.2Mh/s WU: 4.5/m 2: AMU 2 : | 335.8M / 313.2Mh/s WU: 3.9/m 3: AMU 3 : | 335.6M / 326.5Mh/s WU: 2.4/m 4: AMU 4 : | 335.0M / 333.6Mh/s WU: 4.7/m 5: AMU 5 : | 335.6M / 322.5Mh/s WU: 4.5/m 6: AMU 6 : | 335.7M / 328.6Mh/s WU: 4.1/m 7: AMU 7 : | 335.5M / 334.4Mh/s WU: 3.4/m 8: AMU 8 : | 335.6M / 321.8Mh/s WU: 1.7/m 9: AMU 9 : | 335.6M / 333.7Mh/s WU: 3.9/m 10: HXF 0606252b: 79.1C | 13.59G / 13.08Gh/s WU:190.4/m 11: NF2 00001439: | 3.841G / 3.713Gh/s WU: 53.4/m 12: BF1 0f141615: | 2.056G / 2.030Gh/s WU: 29.2/m 13: NF1 00000980: | 2.137G / 1.980Gh/s WU: 29.6/m 14: NF2 00001440: | 3.277G / 3.103Gh/s WU: 44.8/m 15: NF2 00001461: | 3.351G / 3.284Gh/s WU: 46.3/m 16: NF2 00001464: | 3.665G / 3.448Gh/s WU: 50.8/m 17: NF2 00001468: | 3.800G / 3.739Gh/s WU: 52.7/m 18: NF2 00001410: | 3.443G / 3.297Gh/s WU: 48.0/m 19: BF1 1b071715: | 2.170G / 2.075Gh/s WU: 30.7/m 20: HXF 0606f02a: 79.9C | 11.16G / 10.50Gh/s WU:156.0/m 21: AMU 10 : | 335.5M / 325.9Mh/s WU: 6.6/m 22: AMU 11 : | 335.5M / 306.9Mh/s WU: 4.8/m 23: AMU 12 : | 335.4M / 333.8Mh/s WU: 4.9/m 24: AMU 13 : | 335.8M / 332.1Mh/s WU: 4.7/m
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 07, 2014, 09:30:09 PM |
|
WOW! Way to take advantage of the May Special.We are busy with final assembly to keep up. Thanks for your orders! ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FQzR6eIS.jpg&t=665&c=bl0ihnBD5e10dw) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FG9CpKoY.jpg&t=665&c=1PumJuT0z4sW6g)
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 09, 2014, 04:12:46 PM |
|
We just issued a 10% off coupon for anyone who has already purchased an NF2. The code was sent to your email. If you did not receive it please let me know and I'll get it to you.
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 14, 2014, 04:46:52 PM |
|
Pricing: [PRICE DROP] [PRICE DROP] [PRICE DROP] [/list]
|
|
|
|
TheSchwartz
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 04:48:29 PM |
|
I just ordered 2 of these Nano Fury IIs, and I got them yesterday. I plugged the first one into my computer and opened bfgminer, it was running at about 2.5 gh/s, even when I raised it to 55 bits, with <1% error rate. Then I put the second Nano Fury into my computer and the first NF2 dropped to below 1.5 gh/s with an error rate of 4% and the second NF2 stayed at .5 gh/s with an error rate of 75%. I then went and bought a powered usb 2.0 hub and 2 usb fans and installed everything and plugged it into my computer. When i opened bfgminer it was the same results. I would really like to buy 25 more of these NF2s and an eyeboot 49 port hub to mine more, but not if I can't even get 2 NF2s working together, let alone 1 NF2 up to 5 gh/s. Can ANYONE please help me, I would really appreciate it. I am new to these forums, so I will leave my email for anyone to help me. Thanks Fyreguy16@yahoo.com
|
|
|
|
Swimmer63 (OP)
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 20, 2014, 06:43:00 PM |
|
I just ordered 2 of these Nano Fury IIs, and I got them yesterday. I plugged the first one into my computer and opened bfgminer, it was running at about 2.5 gh/s, even when I raised it to 55 bits, with <1% error rate. Then I put the second Nano Fury into my computer and the first NF2 dropped to below 1.5 gh/s with an error rate of 4% and the second NF2 stayed at .5 gh/s with an error rate of 75%. I then went and bought a powered usb 2.0 hub and 2 usb fans and installed everything and plugged it into my computer. When i opened bfgminer it was the same results. I would really like to buy 25 more of these NF2s and an eyeboot 49 port hub to mine more, but not if I can't even get 2 NF2s working together, let alone 1 NF2 up to 5 gh/s. Can ANYONE please help me, I would really appreciate it. I am new to these forums, so I will leave my email for anyone to help me. Thanks Fyreguy16@yahoo.comHopefully vs3 chimes in here. But it sounds like your first one is only seeing one chip and you need a different version of BFGMiner. Try one of these. http://www.nanofury.com/80adc6d430c9f49010a0a6e80e7bd832c9c61b16-win32.ziphttp://www.nanofury.com/80adc6d430c9f49010a0a6e80e7bd832c9c61b16-win64.zipThen when the second one goes in there are not enough amps for the two of them. So - what USB hub are you using? Does it have external power or does it just plug into your computer? If it has external power what are the amps (example, 4A) listed on the power cord/converter.
|
|
|
|
|