RTX 3080 hashrate drop list

[Metroid]

Hah, there's no MSRP anywhere  )
MSRP here = 1100 EUR.

Yeah, there is no msrp if idiots/trolls or people with more money than sense always pay more for it. Who is winning here is resellers and scalpers because I'm sure nvidia sells to them much lower than the msrp they established which for 3080 is $699.

[1714777302]

1714777302

[1714777302]

1714777302

[1714777302]

1714777302

[philipma1957]

third evga 3080 arrived ran it over night

here are screen shots.

it is on an old z270 aorus board.

using a shitty bronze psu

link to evga. 769 oem price

https://www.evga.com/products/product.aspx?pn=10G-P5-3885-KR

I used a fan to add some cooling to the back plate.

I will test without fan tomorrow

[philipma1957]

What about this :p

nice.


 what is the psu: gold, plat ,bronze? I have a lot of psu's laying around maybe I have the same as yours and can switch it in.

good numbers 97mh is good

nice way to have extra cooling for back plate

[Marvell2]

I have 2 evga

https://www.evga.com/products/product.aspx?pn=10G-P5-3885-KR

EVGA GeForce RTX 3080 XC3 ULTRA GAMING, 10G-P5-3885-KR, 10GB GDDR6X, iCX3 Cooling, ARGB LED, Metal Backplate


They run at 95mh each 190mh total since nov 18th

1 x 3080 = 95mhs, 250 watts?
3 x 570 = 90mhs, 360 watts

At moment rx 570 sold around 160 usd?

239 watts not 250

and I have a space issue.  I have the power and the price but not the space. So 3080 is better.

At the moment all amd 6800, 6800xt, 5700xt ,5600xt, nvidia 3070, 3080 ,3090.  on amazon , newegg and provantage are sold out and only resellers have them.


At newegg the rx 570  is available

8gb 200 usd this was a good card I had some
https://www.newegg.com/sapphire-radeon-rx-570-11266-78-20g/p/N82E16814202384?

8gb 180 usd this was a shit card I had some
https://www.newegg.com/msi-radeon-rx-570-rx-570-armor-8g-oc/p/N82E16814137256?

here is the list
https://www.newegg.com/p/pl?d=radeon+rx+570&N=8000%2050001312%2050001669%2050001561%2050001315%2050001314

So you are 180 to 220 a card

its outrageous how bad the stock is on the next gen 3x nvidia and 6x and even 5x amd is
what the hell is going on its a month after release and still zero stock, i know covid and all but all this gear is made in asia which has pretty much beat covid

[Metroid]

third evga 3080 arrived ran it over night

281 watts the whole system, gpu only must be around 230 watts.

[Spill]

A manager at microcenter right down the block from me just told me i might be able to get a Zotac GeForce RTX 3090 Gaming Trinity Triple-Fan for 1519.00 if i can show up before 11am was wondering if zotac suffers from the slowdowns when they mine or keep waiting for asus's or EGVA's? 

[BitBlitzer]

You could buy it as an expensive toy but I wouldn't expect to make money off of it.

Once the 3080 Ti and 6900 XT become available nVidia will have to lower the price on the 3090s and even if they don't their resale value will drop buy 20-30% very quickly.

[geck]

zotac holo doesn't throttle in my gaming pc.
712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer)

[666mrga999]

zotac holo doesn't throttle in my gaming pc.
712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer)

How long did you let it mining? Because Zotac has all poscaps and it should throtle.

[geck]

Close to 3 hours now.
It isn't the caps causing it, it is the memory temperature. If you look at gpu-z perfcap shows therm

[philipma1957]

zotac holo doesn't throttle in my gaming pc.
712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer)

How long did you let it mining? Because Zotac has all poscaps and it should throtle.

We kicked around mixed caps vs 1 cap as throttle it is not

but 1 cap does lock up cool units on high clocks.

my mixed cap evga can go to + 1400 or +1500. and does not lock up or over heat.  it has good cooling 3 fan and the mixed caps.

see if you can clock higher and if it locks even if the memory is cool.

[geck]

zotac holo doesn't throttle in my gaming pc.
712mV -250core +775mem 91.8MH @ 230W atw (205W in phoenixminer)

How long did you let it mining? Because Zotac has all poscaps and it should throtle.

We kicked around mixed caps vs 1 cap as throttle it is not

but 1 cap does lock up cool units on high clocks.

my mixed cap evga can go to + 1400 or +1500. and does not lock up or over heat.  it has good cooling 3 fan and the mixed caps.

see if you can clock higher and if it locks even if the memory is cool.

It might lock up on high core clocks, but i will not get to those clocks anyway since it is inside my desktop and i've built it to be silent so it does get pretty warm in there. Even so, gpu-z didn't show any thermal issues.

On a side note, pretty happy with this card. Looks pretty and well engineered. I got this card: https://jisakuhibi.jp/review/zotac-gaming-geforce-rtx-3080-amp-holo
Review is in japanese but google translate does a good job and the review has a complete tear down. All that rgb is awesome inside my windowless case   

[16Gb]

My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory.
It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock)  

[STSMiner]

So ..... here's some info for you guys that have a new RTX 30x0 card .... this is mostly for the RTX 3080 / 90 cards.

The test below was not carried out by me, but I have managed to confirm the findings with my RTX 3090 I have.

The card used in this test -- MSI RTX 3090 Gaming.

Picture 1  --   Two heat sensors are placed on the memory chips that are on the back of the card.

Picture 2  --  This shows the card running in idle ..... nothing running, notice the temperature   33C

Picture 3  --  This shows the card mining Dagger / Ethash, the monitor on the left shows the card mining, the temperature on the memory chips climb to over 76C, this is what causes the cards to throttle down, the 3080 cards also suffer with this issue with the memory chips on the other side of the card (heat sink / fan side).
In order to get the most out of these cards, the memory chips and the VRM's need to be cooled down as much as possible.
Make sure you have plenty of air flow around the card(s) and give them space to breath.




This is my RTX3090 .....

[ol92]

RTX 3090 FE: I had the card for a few weeks: throttle easily in ETH mining, no matter the setting, excepting heavy undervolt/underclock for the core and no overclock for the memory: 105Mh/s-110Mh/s @250-260W is doable. Works OK for Conflux, with carefull settings.
RTX 3080 TUF: No problem with ETH mining with core undervolt and memory overclock: core at 1150-1200@0.725mv and mem @ +1200 (10451) gives around 100Mh/s @ 210-215W. But, it needs appropriate case cooling (when I had both card in my case, the TUF was throttling from time to time).

Overall, RTX 3090 is not appropriate for ETH mining (even without taking into consideration the price): the doubled memory chip on both side are difficult to cool and leads to an increased power usage.
3080 TUF has appropriate cooling on the mem chip and is OK for ETH mining.

[jgonzi]

My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory.
It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock)  

Memory Temp... lot 3080 have that problem.  Better Thermal Pads

[666mrga999]

I have bought EVGA FTW3 and Palit Gaming Pro, neither of the throtthles.
Managed to get 220W EVGA@100MH/s and 210W Palit@100MH/s.
Stable for 2 days now, no memory problems atm.

[666mrga999]

My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory.
It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock)  

I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable.
I have fans set to 55% and power limited to 200W. Less power means less heat.

[jgonzi]

My rtx gamerock 3080, throttling if i use fan less 100% and then 700 overclock on memory.
It always uses 100% coolers (If autofan enabled) in eth mining (even without memory overclock)  

I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable.
I have fans set to 55% and power limited to 200W. Less power means less heat.

Complete true, but some cards needs more power to arrive the MHs. Blocking the Fan is not the best option on the 3080, because you are not able to see the Memory Temp. You should leave it in auto. If you see the fan goes higher meanwhile the GPU is not hot... that means you have Memory Temp problems...

But of course are your cards and your memory....

[16Gb]

I have 2 Gamerock cards, one does 104MHs stable other can do only 100MHs stable.
I have fans set to 55% and power limited to 200W. Less power means less heat.

How many days you mining with this cards?