ANTMINER T17 + Problems with connecting to pool, connection refused please help

[antminer505]

Hi community:

I have two antminers t17+,and a S9 connected yesterday there was a blown fuse and had to change the wiring to support the electricity charge. However after the fuse was fixed, i decided to upgrade the firmware for both machines but Only one t17+ and S9 came back, the other T17+ didnt come back.

The t17+ that didnt come back, i tried to upgrade the firmware with the normal T17 firmware by accident, but it didnt work. After upgrading it with the T17+ correct firmware from bitmain it said success and rebooted.

However it always stays on socket refused error, for over 30 minutes it wont connect at all. I tried changing the ethernet cable, changing pluggets, tried different pools, when i ping it is recieving signal, but when visiting miner status, nothing shows up.

heres the log: Please help!

Code:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203416K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25960K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12920K (cce62000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 42/16, WL threshold: 4096, image sequence number: 3411889194
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 52BF27D3-2590-4CC3-A5BE-DAFDC2EF553A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 145/40, WL threshold: 4096, image sequence number: 4239463399
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID F65D654D-AB15-4AC9-B17F-1892D7452A68, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-11-27 10:42:15 driver-btm-api.c:762:init_freq_mode: This is scan-user version
2020-11-27 10:42:15 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version     = 1
2020-11-27 10:42:15 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab        = 1
2020-11-27 10:42:15 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-11-27 10:42:15 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun  2 10:11:10 CST 2020 type: Antminer T17+
2020-11-27 10:42:15 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50
2020-11-27 10:42:15 driver-btm-api.c:2180:show_sn: 801c74864e10481c�7
2020-11-27 10:42:15 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 801c74864e10481c�7
2020-11-27 10:42:15 fan.c:263:front_fan_power_on: Note: front fan is power on!
2020-11-27 10:42:15 fan.c:273:rear_fan_power_on: Note: rear fan is power on!
2020-11-27 10:42:15 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX
2020-11-27 10:42:15 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-11-27 10:42:21 driver-btm-api.c:1281:init_miner_version: miner ID : 801c74864e10481c
2020-11-27 10:42:21 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-11-27 10:42:27 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-11-27 10:42:27 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-11-27 10:42:27 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-11-27 10:42:27 driver-btm-api.c:845:get_chip_version: chip_version[0] = 0
2020-11-27 10:42:27 driver-btm-api.c:845:get_chip_version: chip_version[1] = 0
2020-11-27 10:42:27 driver-btm-api.c:845:get_chip_version: chip_version[2] = 0
2020-11-27 10:42:27 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled
2020-11-27 10:42:27 driver-btm-api.c:2297:update_conf_by_power_feedback: get_calibration_voltage, vol:1850.
2020-11-27 10:42:27 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 65836, index = 5, adjust_vol = 20
2020-11-27 10:42:27 thread.c:1462:create_read_nonce_reg_thread: create thread
2020-11-27 10:42:33 driver-btm-api.c:1281:init_miner_version: miner ID : 801c74864e10481c
2020-11-27 10:42:33 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-11-27 10:42:38 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-11-27 10:42:38 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-11-27 10:42:38 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-11-27 10:42:38 driver-btm-api.c:845:get_chip_version: chip_version[0] = 0
2020-11-27 10:42:38 driver-btm-api.c:845:get_chip_version: chip_version[1] = 0
2020-11-27 10:42:38 driver-btm-api.c:845:get_chip_version: chip_version[2] = 0
2020-11-27 10:42:38 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0
2020-11-27 10:42:38 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0
2020-11-27 10:42:38 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0
2020-11-27 10:42:38 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0
2020-11-27 10:42:38 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always
2020-11-27 10:42:38 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+
2020-11-27 10:42:38 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-11-27 10:42:38 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-11-27 10:42:38 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-11-27 10:42:38 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-11-27 10:42:38 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-11-27 10:42:38 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-11-27 10:42:39 driver-btm-api.c:2461:bitmain_board_init: Fan check passed.
2020-11-27 10:42:40 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-11-27 10:42:42 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-11-27 10:42:43 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-11-27 10:42:45 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-11-27 10:42:46 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-11-27 10:42:49 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-11-27 10:42:49 thread.c:1457:create_pic_heart_beat_thread: create thread
2020-11-27 10:42:50 power_api.c:231:power_init: power type version: 0x0042
2020-11-27 10:42:50 power_api.c:249:power_init: Power init:
2020-11-27 10:42:50 power_api.c:250:power_init: current_voltage_raw = 0
2020-11-27 10:42:50 power_api.c:251:power_init: highest_voltage_raw = 1950
2020-11-27 10:42:50 power_api.c:252:power_init: working_voltage_raw = 1900
2020-11-27 10:42:50 power_api.c:253:power_init: higher_voltage_raw  = 1930
2020-11-27 10:42:50 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2020-11-27 10:42:50 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-11-27 10:42:50 power_api.c:218:power_off: init gpio907
2020-11-27 10:42:50 power_api.c:221:power_off: set gpio907 to 1
2020-11-27 10:43:21 power_api.c:206:power_on: set gpio907 to 0
2020-11-27 10:43:22 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2020-11-27 10:43:40 power_api.c:120:check_voltage_multi: retry time: 0
2020-11-27 10:43:41 power_api.c:56:_get_avg_voltage: an6 raw = 2.538710, factor = 1.015484
2020-11-27 10:43:41 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.458704, an2 18.589581, an6 2.500000.
2020-11-27 10:43:42 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-11-27 10:43:42 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.722433, an2 18.518378, an6 2.500000.
2020-11-27 10:43:44 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-11-27 10:43:44 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.457541, an2 18.446135, an6 2.500000.
2020-11-27 10:43:44 power_api.c:85:_get_avg_voltage: average_voltage = 18.518031
2020-11-27 10:43:44 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.52, check voltage passed.
2020-11-27 10:43:46 power_api.c:56:_get_avg_voltage: an6 raw = 2.538710, factor = 1.015484
2020-11-27 10:43:46 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.458704, an2 18.589581, an6 2.500000.
2020-11-27 10:43:47 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-11-27 10:43:47 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.722433, an2 18.518378, an6 2.500000.
2020-11-27 10:43:48 power_api.c:56:_get_avg_voltage: an6 raw = 2.541935, factor = 1.016774
2020-11-27 10:43:48 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.458122, an2 18.469543, an6 2.500000.
2020-11-27 10:43:48 power_api.c:85:_get_avg_voltage: average_voltage = 18.525834
2020-11-27 10:43:48 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.53, check voltage passed.
2020-11-27 10:43:48 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-11-27 10:43:57 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-11-27 10:44:06 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0
2020-11-27 10:44:15 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0
2020-11-27 10:44:20 driver-btm-api.c:425:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2020-11-27 10:44:20 driver-btm-api.c:425:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2020-11-27 10:44:20 driver-btm-api.c:425:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2020-11-27 10:44:21 driver-btm-api.c:1931:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0
2020-11-27 10:44:21 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-11-27 10:44:21 driver-btm-api.c:1972:check_clock_counter: freq 50 clock_counter_limit 6
2020-11-27 10:44:43 voltage[0] = 1760
2020-11-27 10:44:43 voltage[1] = 1760
2020-11-27 10:44:43 voltage[2] = 1760
2020-11-27 10:44:43 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1760
2020-11-27 10:44:44 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. TMP451
2020-11-27 10:44:46 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. TMP451
2020-11-27 10:44:47 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. TMP451
2020-11-27 10:44:47 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2020-11-27 10:44:49 driver-btm-api.c:294:check_bringup_temp: Bring up temperature is 25
2020-11-27 10:44:49 thread.c:1477:create_check_miner_status_thread: create thread
2020-11-27 10:44:49 thread.c:1467:create_set_miner_status_thread: create thread
2020-11-27 10:44:49 driver-btm-api.c:712:calculate_timeout: dev->timeout = 245
2020-11-27 10:44:49 thread.c:1447:create_temperature_monitor_thread: create thread
2020-11-27 10:44:49 frequency.c:527:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 25 dec_freq_index=0
2020-11-27 10:44:49 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790
2020-11-27 10:44:49 driver-btm-api.c:1802:send_null_work: [DEBUG] Send null work.
2020-11-27 10:44:49 thread.c:1437:create_asic_status_monitor_thread: create thread
2020-11-27 10:44:49 frequency.c:1194:inc_freq_with_fixed_vco: chain = 255, freq = 735, is_higher_voltage = true
2020-11-27 10:44:49 frequency.c:1210:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 59
2020-11-27 10:44:49 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1860, step by step.
2020-11-27 10:45:07 power_api.c:120:check_voltage_multi: retry time: 0
2020-11-27 10:45:08 power_api.c:56:_get_avg_voltage: an6 raw = 2.541935, factor = 1.016774
2020-11-27 10:45:08 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.638324, an2 18.662436, an6 2.500000.
2020-11-27 10:45:09 power_api.c:56:_get_avg_voltage: an6 raw = 2.551613, factor = 1.020645
2020-11-27 10:45:09 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.615676, an2 18.567636, an6 2.500000.
2020-11-27 10:45:10 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-11-27 10:45:10 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.591141, an2 18.494938, an6 2.500000.
2020-11-27 10:45:10 power_api.c:85:_get_avg_voltage: average_voltage = 18.575003
2020-11-27 10:45:10 power_api.c:106:check_voltage: target_vol = 18.60, actural_vol = 18.58, check voltage passed.
2020-11-27 10:45:12 power_api.c:56:_get_avg_voltage: an6 raw = 2.541935, factor = 1.016774
2020-11-27 10:45:12 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.638324, an2 18.662436, an6 2.500000.
2020-11-27 10:45:13 power_api.c:56:_get_avg_voltage: an6 raw = 2.551613, factor = 1.020645
2020-11-27 10:45:13 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.591656, an2 18.543616, an6 2.500000.
2020-11-27 10:45:14 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-11-27 10:45:14 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.615191, an2 18.518989, an6 2.500000.
2020-11-27 10:45:14 power_api.c:85:_get_avg_voltage: average_voltage = 18.575013
2020-11-27 10:45:14 power_api.c:106:check_voltage: target_vol = 18.60, actural_vol = 18.58, check voltage passed.
2020-11-27 10:45:16 frequency.c:1210:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 69
2020-11-27 10:45:18 frequency.c:1210:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 81
2020-11-27 10:45:20 frequency.c:1210:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 83
2020-11-27 10:45:22 frequency.c:1210:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 97
2020-11-27 10:45:25 frequency.c:1210:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 104
2020-11-27 10:45:29 frequency.c:1210:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 117

Here is a second log from the same miner.

Code:

pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12920K (cce62000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 44/17, WL threshold: 4096, image sequence number: 3411889194
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 52BF27D3-2590-4CC3-A5BE-DAFDC2EF553A, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 145/40, WL threshold: 4096, image sequence number: 4239463399
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID F65D654D-AB15-4AC9-B17F-1892D7452A68, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
net_ratelimit: 17 callbacks suppressed
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
net_ratelimit: 13 callbacks suppressed
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
ICMPv6: NA: someone advertises our address fe80:0000:0000:0000:3640:3fff:fee3:f6a1 on eth0!
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-11-27 11:28:00 driver-btm-api.c:762:init_freq_mode: This is scan-user version
2020-11-27 11:28:00 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version     = 1
2020-11-27 11:28:00 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab        = 1
2020-11-27 11:28:00 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-11-27 11:28:00 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun  2 10:11:10 CST 2020 type: Antminer T17+
2020-11-27 11:28:00 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50
2020-11-27 11:28:00 driver-btm-api.c:2180:show_sn: 801c74864e10481c�7
2020-11-27 11:28:00 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 801c74864e10481c�7
2020-11-27 11:28:00 fan.c:263:front_fan_power_on: Note: front fan is power on!
2020-11-27 11:28:00 fan.c:273:rear_fan_power_on: Note: rear fan is power on!
2020-11-27 11:28:00 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX
2020-11-27 11:28:00 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-11-27 11:28:06 driver-btm-api.c:1281:init_miner_version: miner ID : 801c74864e10481c
2020-11-27 11:28:06 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-11-27 11:28:12 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-11-27 11:28:12 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-11-27 11:28:12 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-11-27 11:28:12 driver-btm-api.c:845:get_chip_version: chip_version[0] = 0
2020-11-27 11:28:12 driver-btm-api.c:845:get_chip_version: chip_version[1] = 0
2020-11-27 11:28:12 driver-btm-api.c:845:get_chip_version: chip_version[2] = 0
2020-11-27 11:28:12 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled
2020-11-27 11:28:12 driver-btm-api.c:2297:update_conf_by_power_feedback: get_calibration_voltage, vol:1850.
2020-11-27 11:28:12 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 65836, index = 5, adjust_vol = 20
2020-11-27 11:28:12 thread.c:1462:create_read_nonce_reg_thread: create thread
2020-11-27 11:28:18 driver-btm-api.c:1281:init_miner_version: miner ID : 801c74864e10481c
2020-11-27 11:28:18 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-11-27 11:28:23 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-11-27 11:28:23 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-11-27 11:28:23 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-11-27 11:28:23 driver-btm-api.c:845:get_chip_version: chip_version[0] = 0
2020-11-27 11:28:23 driver-btm-api.c:845:get_chip_version: chip_version[1] = 0
2020-11-27 11:28:23 driver-btm-api.c:845:get_chip_version: chip_version[2] = 0
2020-11-27 11:28:23 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0
2020-11-27 11:28:23 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0
2020-11-27 11:28:23 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0
2020-11-27 11:28:23 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0
2020-11-27 11:28:23 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always
2020-11-27 11:28:23 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+
2020-11-27 11:28:23 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-11-27 11:28:23 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-11-27 11:28:23 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-11-27 11:28:23 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-11-27 11:28:23 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-11-27 11:28:23 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-11-27 11:28:23 driver-btm-api.c:2461:bitmain_board_init: Fan check passed.
2020-11-27 11:28:24 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-11-27 11:28:26 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-11-27 11:28:27 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-11-27 11:28:30 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-11-27 11:28:31 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-11-27 11:28:33 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-11-27 11:28:33 thread.c:1457:create_pic_heart_beat_thread: create thread
2020-11-27 11:28:34 power_api.c:231:power_init: power type version: 0x0042
2020-11-27 11:28:34 power_api.c:249:power_init: Power init:
2020-11-27 11:28:34 power_api.c:250:power_init: current_voltage_raw = 0
2020-11-27 11:28:34 power_api.c:251:power_init: highest_voltage_raw = 1950
2020-11-27 11:28:34 power_api.c:252:power_init: working_voltage_raw = 1900
2020-11-27 11:28:34 power_api.c:253:power_init: higher_voltage_raw  = 1930
2020-11-27 11:28:34 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2020-11-27 11:28:34 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-11-27 11:28:34 power_api.c:218:power_off: init gpio907
2020-11-27 11:28:34 power_api.c:221:power_off: set gpio907 to 1

[1714794934]

1714794934

[1714794934]

1714794934

[1714794934]

1714794934

[thierry4wd]

Hi, in the start-up, I see that the miner this stop when he tries to increase the frequency of the cards, and therefore never starts, which seems to me odd, is that you have tried different firmware and that has not not solved the problem ...

I suggest you, I test my firmware (available in the software section), it has a different starting system, this could solve your problem, if this solves your problem then it's great, and if my firmware does not please you for X reason, you can always go back;)

just sit ...

[antminer505]

Hi, in the start-up, I see that the miner this stop when he tries to increase the frequency of the cards, and therefore never starts, which seems to me odd, is that you have tried different firmware and that has not not solved the problem ...

I suggest you, I test my firmware (available in the software section), it has a different starting system, this could solve your problem, if this solves your problem then it's great, and if my firmware does not please you for X reason, you can always go back;)

just sit ...

Thank you for the reply!

The links on your thread seem to be down!

[mikeywith]

Your chip count looks fine

Code:

2020-11-27 10:43:57 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-11-27 10:44:06 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0
2020-11-27 10:44:15 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0

The chip temperature sensors look fine

Code:

2020-11-27 10:44:44 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. TMP451
2020-11-27 10:44:46 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. TMP451
2020-11-27 10:44:47 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. TMP451

... but when visiting miner status, nothing shows up.

What do you mean by nothing shows up? you were able to pull the kernel log from the miner so that status page also must have come up, try to hit Ctrl+F5 , also a screenshot would be helpful.

If this is bitmain firmware, on the miner configuration tab, right at the bottom there is 'Work Mode' tab, make sure it's not 'Sleep Mode'.

[favebook]

I think OP is just not giving it enough time to boot.

First Kernel Log seems to be okay, it started tuning and I am not sure what happened after (I assume OP restarted his machine).

Second Kernel Log is also fine, this line:

Code:

2020-11-27 11:28:34 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish.

means it just started booting up and is doing 30sec sleep (not sure why Bitmain implemented this), after that it should start tuning and then mining after a few minutes.

@OP, leave your machine for 30min to see if it will start mining. I have a great deal of experience with impatient people who just RMA-ed units I sold them because it wouldn't start mining in 3 minutes after plugging in.

Otherwise, if this is not the case, check your configuration. After updating firmware, you might have wiped your settings clean, and it boots up but doesn't have settings where to mine.


Also, what voltage are you on? 220v?

[antminer505]

[...]

I leave it mining for 30 minutes or over, it seems the machine restarts on its own, and only mines low capacity using asic.to firmware. I am using 220 V.

[...]

Code:

Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203436K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25940K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12900K (cce67000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 10/4, WL threshold: 4096, image sequence number: 3526920002
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 795AAA92-50D7-4ACF-BD29-A7EC8F7BF6DA, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 147/41, WL threshold: 4096, image sequence number: 4239463399
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID F65D654D-AB15-4AC9-B17F-1892D7452A68, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: eth0: IPv6 duplicate address fe80::3640:3fff:fee3:f6a1 detected!
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-11-28 22:38:59 driver-btm-api.c:723:init_freq_mode: This is scan-user version
2020-11-28 22:38:59 driver-btm-api.c:2514:bitmain_soc_init: opt_multi_version     = 1
2020-11-28 22:38:59 driver-btm-api.c:2515:bitmain_soc_init: opt_bitmain_ab        = 1
2020-11-28 22:38:59 driver-btm-api.c:2516:bitmain_soc_init: opt_bitmain_work_mode = 254
2020-11-28 22:38:59 driver-btm-api.c:2517:bitmain_soc_init: Miner compile time: Wed Apr  8 11:27:07 CST 2020 type: Antminer T17+
2020-11-28 22:38:59 driver-btm-api.c:2518:bitmain_soc_init: commit version: fc44955 2020-04-08 11:23:26, build by: lol 2020-04-08 11:32:55
2020-11-28 22:38:59 driver-btm-api.c:2141:show_sn: 801c74864e10481c<7
2020-11-28 22:38:59 driver-btm-api.c:2198:handle_sn_for_factory_mode: read sn success, 801c74864e10481c<7
2020-11-28 22:38:59 fan.c:258:front_fan_power_on: Note: front fan is power on!
2020-11-28 22:38:59 fan.c:268:rear_fan_power_on: Note: rear fan is power on!
2020-11-28 22:38:59 driver-btm-api.c:1318:miner_device_init: Detect 256MB control board of XILINX
2020-11-28 22:38:59 driver-btm-api.c:1259:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-11-28 22:39:05 driver-btm-api.c:1242:init_miner_version: miner ID : 801c74864e10481c
2020-11-28 22:39:05 driver-btm-api.c:1248:init_miner_version: FPGA Version = 0xB023
2020-11-28 22:39:10 driver-btm-api.c:775:get_product_id: product_id[0] = 0
2020-11-28 22:39:10 driver-btm-api.c:775:get_product_id: product_id[1] = 0
2020-11-28 22:39:10 driver-btm-api.c:775:get_product_id: product_id[2] = 0
2020-11-28 22:39:10 driver-btm-api.c:806:get_chip_version: chip_version[0] = 0
2020-11-28 22:39:10 driver-btm-api.c:806:get_chip_version: chip_version[1] = 0
2020-11-28 22:39:10 driver-btm-api.c:806:get_chip_version: chip_version[2] = 0
2020-11-28 22:39:10 driver-btm-api.c:2254:update_conf_by_power_feedback: Power feedback is disabled
2020-11-28 22:39:10 driver-btm-api.c:2258:update_conf_by_power_feedback: get_calibration_voltage, vol:1850.
2020-11-28 22:39:10 chain = 0, mode = 254, load_done = true.
2020-11-28 22:39:10 chain = 1, mode = 254, load_done = true.
2020-11-28 22:39:10 chain = 2, mode = 254, load_done = true.
2020-11-28 22:39:10 frequency.c:1290:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 0, index = 0, adjust_vol = 20
2020-11-28 22:39:10 thread.c:1166:create_read_nonce_reg_thread: create thread
2020-11-28 22:39:16 driver-btm-api.c:1242:init_miner_version: miner ID : 801c74864e10481c
2020-11-28 22:39:16 driver-btm-api.c:1248:init_miner_version: FPGA Version = 0xB023
2020-11-28 22:39:22 driver-btm-api.c:775:get_product_id: product_id[0] = 0
2020-11-28 22:39:22 driver-btm-api.c:775:get_product_id: product_id[1] = 0
2020-11-28 22:39:22 driver-btm-api.c:775:get_product_id: product_id[2] = 0
2020-11-28 22:39:22 driver-btm-api.c:806:get_chip_version: chip_version[0] = 0
2020-11-28 22:39:22 driver-btm-api.c:806:get_chip_version: chip_version[1] = 0
2020-11-28 22:39:22 driver-btm-api.c:806:get_chip_version: chip_version[2] = 0
2020-11-28 22:39:22 driver-btm-api.c:1905:get_ccdly_opt: ccdly_opt[0] = 0
2020-11-28 22:39:22 driver-btm-api.c:1905:get_ccdly_opt: ccdly_opt[1] = 0
2020-11-28 22:39:22 driver-btm-api.c:1905:get_ccdly_opt: ccdly_opt[2] = 0
2020-11-28 22:39:22 driver-btm-api.c:2400:bitmain_board_init: g_ccdly_opt = 0
2020-11-28 22:39:22 driver-btm-api.c:736:_set_project_type: project:0, set to T17Plus always
2020-11-28 22:39:22 driver-btm-api.c:751:_set_project_type: Project type: Antminer T17+
2020-11-28 22:39:22 driver-btm-api.c:762:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-11-28 22:39:22 driver-btm-api.c:763:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-11-28 22:39:22 driver-btm-api.c:762:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-11-28 22:39:22 driver-btm-api.c:763:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-11-28 22:39:22 driver-btm-api.c:762:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-11-28 22:39:22 driver-btm-api.c:763:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-11-28 22:39:23 driver-btm-api.c:2422:bitmain_board_init: Fan check passed.
2020-11-28 22:39:24 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-11-28 22:39:26 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-11-28 22:39:27 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-11-28 22:39:29 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-11-28 22:39:30 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-11-28 22:39:32 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-11-28 22:39:32 thread.c:1161:create_pic_heart_beat_thread: create thread
2020-11-28 22:39:34 power_api.c:231:power_init: power type version: 0x0042
2020-11-28 22:39:34 power_api.c:249:power_init: Power init:
2020-11-28 22:39:34 power_api.c:250:power_init: current_voltage_raw = 0
2020-11-28 22:39:34 power_api.c:251:power_init: highest_voltage_raw = 1950
2020-11-28 22:39:34 power_api.c:252:power_init: working_voltage_raw = 1900
2020-11-28 22:39:34 power_api.c:253:power_init: higher_voltage_raw  = 1930
2020-11-28 22:39:34 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2020-11-28 22:39:34 driver-btm-api.c:2432:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-11-28 22:39:34 power_api.c:218:power_off: init gpio907
2020-11-28 22:39:34 power_api.c:221:power_off: set gpio907 to 1
2020-11-28 22:40:05 power_api.c:206:power_on: set gpio907 to 0
2020-11-28 22:40:06 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2020-11-28 22:40:24 power_api.c:120:check_voltage_multi: retry time: 0
2020-11-28 22:40:25 power_api.c:56:_get_avg_voltage: an6 raw = 2.541935, factor = 1.016774
2020-11-28 22:40:25 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.458122, an2 18.565989, an6 2.500000.
2020-11-28 22:40:26 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-11-28 22:40:26 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.745570, an2 18.470887, an6 2.500000.
2020-11-28 22:40:27 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-11-28 22:40:27 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.457541, an2 18.446135, an6 2.500000.
2020-11-28 22:40:27 power_api.c:85:_get_avg_voltage: average_voltage = 18.494337
2020-11-28 22:40:27 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.49, check voltage passed.
2020-11-28 22:40:30 power_api.c:56:_get_avg_voltage: an6 raw = 2.541935, factor = 1.016774
2020-11-28 22:40:30 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.458122, an2 18.565989, an6 2.500000.
2020-11-28 22:40:31 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-11-28 22:40:31 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.745570, an2 18.470887, an6 2.500000.
2020-11-28 22:40:32 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-11-28 22:40:32 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.457541, an2 18.422054, an6 2.500000.
2020-11-28 22:40:32 power_api.c:85:_get_avg_voltage: average_voltage = 18.486310
2020-11-28 22:40:32 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.49, check voltage passed.
2020-11-28 22:40:32 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-11-28 22:40:41 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-11-28 22:40:50 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0
2020-11-28 22:40:59 driver-btm-api.c:1123:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0
2020-11-28 22:41:04 driver-btm-api.c:386:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2020-11-28 22:41:04 driver-btm-api.c:386:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2020-11-28 22:41:04 driver-btm-api.c:386:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2020-11-28 22:41:04 driver-btm-api.c:1892:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0
2020-11-28 22:41:04 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-11-28 22:41:04 driver-btm-api.c:1933:check_clock_counter: freq 50 clock_counter_limit 6
2020-11-28 22:41:27 driver-btm-api.c:142:killall_hashboard: ****power off hashboard****
2020-11-28 22:41:30 driver-btm-api.c:2481:check_sleep_mode: wait 5minutes for socket release ...
2020-11-28 22:46:30 driver-btm-api.c:216:set_miner_status: STATUS_INIT
2020-11-28 22:46:34 driver-btm-api.c:216:set_miner_status: STATUS_OKAY
2020-11-28 22:46:35 chain = 0, mode = 254, load_done = true.
2020-11-28 22:46:35 chain = 1, mode = 254, load_done = true.
2020-11-28 22:46:35 chain = 2, mode = 254, load_done = true.
2020-11-28 22:46:36 driver-btm-c5_socketb.c:1055:main: poweroff hash board and enter sleep mode ...
2020-11-28 22:46:39 driver-btm-api.c:1500:dhash_chip_send_job: Version num 1.
2020-11-28 22:47:05 driver-btm-api.c:1500:dhash_chip_send_job: Version num 4.
2020-11-28 22:47:05 driver-btm-api.c:1647:dhash_chip_send_job: stime.tv_sec 1606603625, block_ntime 1606603622

Update: problem persists,it wont mine in normal mode only connects in sleep mode. It is fixed when i flash asic.to firmware but with that firmware even if i set to overclock to 66TH it doesnt mine over 15.

[mikeywith]

Post a screenshot of the miner status, the way things seem to be now are most likely one of three reasons

1- PSU is full of dust, it's getting hot and it goes to protection-mode
This is more probable than the second one, and to troubleshoot it you should try with a different APW9+ or try to clean the one you are using now (obviously make sure it's unplugged when you do that)

2- PSU is dying, can't supply enough juice

To troubleshoot this either unplug 2 hashboards and leave only one running, or set a very low profile on Asic.to

3- Hashboards are getting hot so the miner shuts them off

it's unlikely given the short run-time you have, but it's still a possibility which you look into if the above turns out fine.

[antminer505]

https://i.imgur.com/qhSt0gw.png

The minerstatus does not show up anything in workmode, no matter how much time has passed and miner automatically restarts. The miner status does show alive connections when its in sleep mode. Going to troubleshoot psu now.

[favebook]

I'd advise reverting back to original firmware (unselecting "save settings" when updating firmware), leaving the machine for 2-3 hours and then posting the logs. Asic.to autotune can take days sometimes if hashboards are really bad, and I am not familiar with all the names in Kernel Log that Vnish uses, however, I am well versed in original firmware kernel log (yes there is difference).

Also, if try the things mikeywith recommended you. Even though I doubt PSU is dead or dying, it's worth ruling out.

Also, how is it possible that you are leaving it for 30min+ but all your logs are in range of 3-10min. If your machine is restarting constantly after few minutes, that might just be the profile doing autotune and you didn't let it finish yet (yes it can take hours / sometimes days as I already said).
If that is the case, Kernel Log might not show the tuning steps.
Go into miner configuration>mining profiles and on the bottom of page you will see 2 kind of logs. One is Kernel Log or restart log (not sure how he calls it there) and shouldn't give much useful info, that one should be on left. On right side you will see auto-tune log. Copy that and post it here.

[antminer505]

I'd advise reverting back to original firmware (unselecting "save settings" when updating firmware), leaving the machine for 2-3 hours and then posting the logs. Asic.to autotune can take days sometimes if hashboards are really bad, and I am not familiar with all the names in Kernel Log that Vnish uses, however, I am well versed in original firmware kernel log (yes there is difference).

Also, if try the things mikeywith recommended you. Even though I doubt PSU is dead or dying, it's worth ruling out.

Also, how is it possible that you are leaving it for 30min+ but all your logs are in range of 3-10min. If your machine is restarting constantly after few minutes, that might just be the profile doing autotune and you didn't let it finish yet (yes it can take hours / sometimes days as I already said).
If that is the case, Kernel Log might not show the tuning steps.
Go into miner configuration>mining profiles and on the bottom of page you will see 2 kind of logs. One is Kernel Log or restart log (not sure how he calls it there) and shouldn't give much useful info, that one should be on left. On right side you will see auto-tune log. Copy that and post it here.

I cleaned the psu from the inside, a lot of crap came out it was dirty. And it started working now. However i will switch to asic.to firmware after a bit. Thanks everybody!

[mikeywith]

If that is the case, Kernel Log might not show the tuning steps.

I think the tuning logs only show in the mining configuration page, the same tab where you select the tunning profile under the name (Mining profiles), in other words, the URL is 192.168.x.xxx/#/minerprofiles , the kernel log which OP posted comes from /kernellog, and IIRC even if the miner restarts in the process of Auto-tuning that kernel log might not restart along with it.

It's been a while but I think this is how it works, perhaps one of us should look into it.

I cleaned the psu from the inside, a lot of crap came out it was dirty. And it started working now. However i will switch to asic.to firmware after a bit. Thanks everybody!

Thanks for the follow-up, it's unusual for people to report back, so you deserve merit, if you really want to thank us even further, update the thread in a few days to confirm that the issue was a dirty PSU getting hot and causing the miner to restart, these updates will be helpful to other members.

[favebook]

I think the tuning logs only show in the mining configuration page, the same tab where you select the tunning profile under the name (Mining profiles), in other words, the URL is 192.168.x.xxx/#/minerprofiles , the kernel log which OP posted comes from /kernellog, and IIRC even if the miner restarts in the process of Auto-tuning that kernel log might not restart along with it.

It's been a while but I think this is how it works, perhaps one of us should look into it.

Yeah, that is what I was trying to say, I probably got lost with words so you didn't pick up my thoughts.

Kernel Log should persist through restarts triggered by asic.to autotune but should not persist through reboots.

AutoTune log persist through everything.

But well, as OP seems to have found a problem and fixed it, no need for further testing.

[antminer505]

just here to confirm the issue was a dirty psu, also overheating damaged one of the T17s a few days later, the hashboard comes on and off sometimes, i cant be assed to check how to fix that i read its something with cheap soldering.

[moe007]

Hi, in the start-up, I see that the miner this stop when he tries to increase the frequency of the cards, and therefore never starts, which seems to me odd, is that you have tried different firmware and that has not not solved the problem ...

I suggest you, I test my firmware (available in the software section), it has a different starting system, this could solve your problem, if this solves your problem then it's great, and if my firmware does not please you for X reason, you can always go back;)

just sit ...

i know its an older post but thanks for the OS!! lost one board on my T17 could not find the cause. 1 month later i changed pools and the whole thing stopped. installed you OS and bingo 10 min of auto tune and were back online both of us now