I just bought brand new parts for a mining rig.
The parts:
- Asrock H100 Pro BTC +
- Intel Pentium G4560
- Corsair 8GB DDR4 2400MHz C16
- LC POWER LC1650 V2.31 - Mining Edition PSU
The system is powering up with the CPU fan spinning, but there is no diplay, no beep and no light in the RGB keybord. (connected with DVI cable to a monitor that has DVI. No adapter present)
- Checked the CPU socket
- Changed RAM slot
- Tested with another monitor
- Tested with another DVI cable
- Tested with the PSU from my gaming rig
- Tested with the GPU from my gaming rig. Tested with both DVI from the mobo and with HDMI and DP from the GPU.
(RGB on the GPU comes on when starting the system)
- Preformed reset with removing the mobo battery and resetting CMOS
I just can get any display signal out of this system.
So now am out of ideas and need some help, please.
Think you meant the H110 Pro BTC+.
Make sure you have the correct display selected in the BIOS. Restart the system and I believe the command is F2.
I'm running all my PCIE slots on Gen 1 and using the integrated video card as primary.
Poke around in there it seems like that the default graphics maybe the issue.