danieleither (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 15, 2021, 10:09:18 PM |
|
What is the significance of the following information in kernel log: 2021-02-15 20:58:25 voltage[0] = 1780 2021-02-15 20:58:25 voltage[1] = 1800 2021-02-15 20:58:25 voltage[2] = 1780 2021-02-15 20:58:25 Voltage are different. Will exit.
Are these voltage settings that have been stored in the pics, or are they voltage readings? Full log here if required: Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203608K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25768K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12728K (cce93000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1066548518 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 3B9BE536-7E90-4DCF-AEE1-1A87FFC44969, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 680/161, WL threshold: 4096, image sequence number: 914180297 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model alloc_contig_range: [e043, e044) PFNs busy IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready alloc_contig_range: [e043, e044) PFNs busy IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab013 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized Feb 15 20:59:44 (none) user.notice kernel: random: nonblocking pool is initialized Feb 15 21:00:47 (none) local0.notice bmminer: set_start_time_point total_tv_start_sys=288 total_tv_end_sys=289 Feb 15 21:00:49 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_api_detect return: 0 Feb 15 21:00:50 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_update_job return: 0 Feb 15 21:00:51 (none) local0.notice cgminer: cgminer_socket_init reg bitmain_shutdown return: 0 Feb 15 21:00:51 (none) local0.err cgminer: Miner compile time: Mon Apr 27 13:25:08 CST 2020 type: Antminer S17 Pro Feb 15 21:00:51 (none) local0.notice cgminer[999]: about to send detect Feb 15 21:00:51 (none) local0.notice cgminer[999]: set_start_time_point total_tv_start_sys=292 total_tv_end_sys=293 Feb 15 21:00:51 (none) local0.notice cgminer[999]: Probing for an alive pool Feb 15 21:00:51 (none) local0.notice cgminer[999]: LOW POWER MODE! Feb 15 21:00:51 (none) local0.notice cgminer[999]: Switching to pool 1 stratum+tcp://btc-eu.f2pool.com:1314 - first alive pool Feb 15 21:00:51 (none) local0.notice cgminer[999]: in stratum_sthread Feb 15 21:00:51 (none) local0.notice cgminer[999]: Pool 1 difficulty changed to 65536 Feb 15 21:00:51 (none) local0.notice cgminer[999]: Network diff set to 21.4T Feb 15 21:00:51 (none) local0.notice cgminer[999]: POOL 1 support ab mode! Feb 15 21:00:51 (none) local0.notice cgminer[999]: LOW POWER MODE! Feb 15 21:00:51 (none) local0.notice cgminer[999]: in stratum_sthread Feb 15 21:00:51 (none) local0.notice cgminer[999]: Pool 2 difficulty changed to 4096 Feb 15 21:00:51 (none) local0.notice cgminer[999]: LOW POWER MODE! Feb 15 21:00:51 (none) local0.warn cgminer[999]: Pool 0 stratum+tcp://btc.ss.poolin.com:443 alive, testing stability Feb 15 21:00:51 (none) local0.notice cgminer[999]: in stratum_sthread Feb 15 21:00:51 (none) local0.notice cgminer[999]: Pool 0 difficulty changed to 65536 Feb 15 21:00:52 (none) local0.notice cgminer[999]: POOL 0 support ab mode! Feb 15 21:00:52 (none) local0.notice cgminer[999]: update job Feb 15 21:00:52 (none) local0.notice cgminer[999]: job buf total len:2610, offset:2610 Feb 15 21:00:52 (none) local0.notice cgminer[999]: about to send job, size is 2610 Feb 15 21:00:52 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2610 Feb 15 21:00:52 (none) local0.notice bmminer: parse job buf len:2610 Feb 15 21:00:52 (none) local0.warn cgminer[999]: Pool 0 stratum+tcp://btc.ss.poolin.com:443 stable for >120 seconds Feb 15 21:00:52 (none) local0.warn cgminer[999]: Switching to pool 0 stratum+tcp://btc.ss.poolin.com:443 Feb 15 21:00:56 (none) local0.notice cgminer[999]: update job Feb 15 21:00:56 (none) local0.notice cgminer[999]: job buf total len:2631, offset:2631 Feb 15 21:00:56 (none) local0.notice cgminer[999]: about to send job, size is 2631 Feb 15 21:00:56 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2631 Feb 15 21:00:56 (none) local0.notice bmminer: parse job buf len:2631 Feb 15 21:00:57 (none) local0.warn cgminer[999]: API running in IP access mode on port 4028 (15) Feb 15 21:01:02 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:01:02 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:01:02 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:01:02 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:01:02 (none) local0.notice cgminer[999]: Accepted 1de4cf0b Diff 561K/65536 BTM_SOC 0 pool 0 Feb 15 21:01:04 (none) local0.notice cgminer[999]: update job Feb 15 21:01:04 (none) local0.notice cgminer[999]: job buf total len:2631, offset:2631 Feb 15 21:01:04 (none) local0.notice cgminer[999]: about to send job, size is 2631 Feb 15 21:01:04 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2631 Feb 15 21:01:04 (none) local0.notice bmminer: parse job buf len:2631 Feb 15 21:01:24 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:01:24 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:01:24 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:01:24 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:01:24 (none) local0.notice cgminer[999]: Accepted 371d0bbd Diff 304K/65536 BTM_SOC 0 pool 0 Feb 15 21:01:28 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:01:28 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:01:28 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:01:28 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:01:28 (none) local0.notice cgminer[999]: Accepted 56609a64 Diff 194K/65536 BTM_SOC 0 pool 0 Feb 15 21:01:29 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:29 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:29 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:30 (none) local0.info bmminer: (null) 0: invalid nonce - HW error Feb 15 21:01:31 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:01:31 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:01:31 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:01:31 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:01:31 (none) local0.notice cgminer[999]: Accepted 7a0bf0ca Diff 137K/65536 BTM_SOC 0 pool 0 Feb 15 21:01:34 (none) local0.notice cgminer[999]: update job Feb 15 21:01:34 (none) local0.notice cgminer[999]: job buf total len:2631, offset:2631 Feb 15 21:01:34 (none) local0.notice cgminer[999]: about to send job, size is 2631 Feb 15 21:01:34 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2631 Feb 15 21:01:34 (none) local0.notice bmminer: parse job buf len:2631 Feb 15 21:01:37 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:01:37 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:01:37 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:01:37 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:01:37 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:01:37 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:01:37 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:01:37 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:01:37 (none) local0.notice cgminer[999]: Accepted 68fdcbf6 Diff 160K/65536 BTM_SOC 0 pool 0 Feb 15 21:01:37 (none) local0.notice cgminer[999]: Accepted ac569406 Diff 97.3K/65536 BTM_SOC 0 pool 0 Feb 15 21:02:01 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:02:01 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:02:01 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:02:01 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:02:01 (none) local0.notice cgminer[999]: Accepted 56f7828d Diff 193K/65536 BTM_SOC 0 pool 0 Feb 15 21:02:04 (none) local0.notice cgminer[999]: update job Feb 15 21:02:04 (none) local0.notice cgminer[999]: job buf total len:2631, offset:2631 Feb 15 21:02:04 (none) local0.notice cgminer[999]: about to send job, size is 2631 Feb 15 21:02:04 (none) local0.notice bmminer: bitmain_update_job_cb, rec job data 0xb4000480 size: 2631 Feb 15 21:02:04 (none) local0.notice bmminer: parse job buf len:2631 Feb 15 21:02:13 (none) local0.notice bmminer: need data size:514, actual size:514 Feb 15 21:02:13 (none) local0.notice cgminer[999]: got nonce sz 514 Feb 15 21:02:13 (none) local0.notice cgminer[999]: Pool 0 stale share detected, submitting as user requested Feb 15 21:02:13 (none) local0.notice cgminer[999]: cb_bitmain_submit_nonce nonce submited Feb 15 21:02:13 (none) local0.notice cgminer[999]: Accepted 55a0d2b0 Diff 196K/65536 BTM_SOC 0 pool 0 2021-02-15 20:56:43 driver-btm-api.c:542:init_freq_mode: This is scan-user version 2021-02-15 20:56:43 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1 2021-02-15 20:56:43 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1 2021-02-15 20:56:43 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 1 2021-02-15 20:56:43 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:25:08 CST 2020 type: Antminer S17 2021-02-15 20:56:43 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:31:45 2021-02-15 20:56:43 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn 2021-02-15 20:56:44 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX 2021-02-15 20:56:44 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2021-02-15 20:56:44 thread.c:783:create_read_nonce_reg_thread: create thread 2021-02-15 20:56:50 driver-btm-api.c:972:init_miner_version: miner ID : 80026d864e104814 2021-02-15 20:56:50 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013 2021-02-15 20:56:55 driver-btm-api.c:616:get_product_id: product_id[0] = 0 2021-02-15 20:56:55 driver-btm-api.c:616:get_product_id: product_id[1] = 0 2021-02-15 20:56:55 driver-btm-api.c:616:get_product_id: product_id[2] = 0 2021-02-15 20:56:55 driver-btm-api.c:560:_set_project_type: project:0 2021-02-15 20:56:55 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17 Pro 2021-02-15 20:56:55 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101 2021-02-15 20:56:55 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103 2021-02-15 20:56:55 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101 2021-02-15 20:56:55 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103 2021-02-15 20:56:55 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101 2021-02-15 20:56:55 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103 2021-02-15 20:56:57 driver-btm-api.c:1802:bitmain_board_init: Fan check passed. 2021-02-15 20:56:58 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2021-02-15 20:57:00 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xb9 2021-02-15 20:57:01 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2021-02-15 20:57:03 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 2021-02-15 20:57:04 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2021-02-15 20:57:06 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9 2021-02-15 20:57:06 thread.c:778:create_pic_heart_beat_thread: create thread 2021-02-15 20:57:06 power_api.c:207:power_init: Power init: 2021-02-15 20:57:06 power_api.c:208:power_init: current_voltage_raw = 0 2021-02-15 20:57:06 power_api.c:209:power_init: highest_voltage_raw = 2100 2021-02-15 20:57:06 power_api.c:210:power_init: working_voltage_raw = 1830 2021-02-15 20:57:06 power_api.c:211:power_init: higher_voltage_raw = 1950 2021-02-15 20:57:06 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2021-02-15 20:57:06 power_api.c:181:power_off: init gpio907 2021-02-15 20:57:38 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step. 2021-02-15 20:57:40 power_api.c:87:check_voltage_multi: retry time: 0 2021-02-15 20:57:41 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 21.185742 2021-02-15 20:57:43 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.259218 2021-02-15 20:57:44 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 21.216357 2021-02-15 20:57:44 power_api.c:50:_get_avg_voltage: average_voltage = 21.220439 2021-02-15 20:57:44 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.22, check voltage passed. 2021-02-15 20:57:44 uart.c:71:set_baud: set fpga_baud to 115200 2021-02-15 20:57:55 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[0]: find 48 asic, times 0 2021-02-15 20:58:06 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 48 asic, times 0 2021-02-15 20:58:17 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[2]: find 48 asic, times 0 2021-02-15 20:58:22 driver-btm-api.c:345:set_order_clock: chain[0]: set order clock, stragegy 3 2021-02-15 20:58:22 driver-btm-api.c:345:set_order_clock: chain[1]: set order clock, stragegy 3 2021-02-15 20:58:22 driver-btm-api.c:345:set_order_clock: chain[2]: set order clock, stragegy 3 2021-02-15 20:58:22 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2021-02-15 20:58:22 uart.c:71:set_baud: set fpga_baud to 3000000 2021-02-15 20:58:22 driver-btm-api.c:1574:check_clock_counter: freq 50 clock_counter_limit 6 2021-02-15 20:58:24 uart.c:71:set_baud: set fpga_baud to 115200 2021-02-15 20:58:25 voltage[0] = 1780 2021-02-15 20:58:25 voltage[1] = 1800 2021-02-15 20:58:25 voltage[2] = 1780 2021-02-15 20:58:25 Voltage are different. Will exit. 2021-02-15 20:58:26 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. 2021-02-15 20:58:27 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. 2021-02-15 20:58:29 temperature.c:281:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. 2021-02-15 20:58:29 uart.c:71:set_baud: set fpga_baud to 6000000 2021-02-15 20:58:30 driver-btm-api.c:245:check_bringup_temp: Bring up temperature is 18 2021-02-15 20:58:30 thread.c:798:create_check_miner_status_thread: create thread 2021-02-15 20:58:30 thread.c:788:create_set_miner_status_thread: create thread 2021-02-15 20:58:30 thread.c:773:create_temperature_monitor_thread: create thread 2021-02-15 20:58:30 frequency.c:749:inc_freq_with_fixed_vco: chain = 255, freq = 565, is_higher_voltage = true 2021-02-15 20:58:30 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 2020, step by step. 2021-02-15 20:58:49 power_api.c:87:check_voltage_multi: retry time: 0 2021-02-15 20:58:50 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 20.334638 2021-02-15 20:58:51 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 20.414238 2021-02-15 20:58:52 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 20.365254 2021-02-15 20:58:52 power_api.c:50:_get_avg_voltage: average_voltage = 20.371377 2021-02-15 20:58:52 power_api.c:68:check_voltage: target_vol = 20.20, actural_vol = 20.37, check voltage passed. 2021-02-15 20:59:09 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 20:59:11 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 20:59:11 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 20:59:13 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 20:59:13 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 20:59:15 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 20:59:15 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0 2021-02-15 20:59:17 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 1 2021-02-15 20:59:20 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 20:59:21 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 20:59:22 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 20:59:22 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 1900, step by step. 2021-02-15 20:59:23 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 20:59:23 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 180, reg = 28, got chain = 1, chip = 40, reg = 28 2021-02-15 20:59:42 power_api.c:87:check_voltage_multi: retry time: 0 2021-02-15 20:59:43 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 19.097783 2021-02-15 20:59:44 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 19.195752 2021-02-15 20:59:45 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 19.116152 2021-02-15 20:59:45 power_api.c:50:_get_avg_voltage: average_voltage = 19.136562 2021-02-15 20:59:45 power_api.c:68:check_voltage: target_vol = 19.00, actural_vol = 19.14, check voltage passed. 2021-02-15 20:59:51 frequency.c:801:inc_freq_with_fixed_step: chain = 0, freq_start = 565, freq_end = 590, freq_step = 5, is_higher_voltage = true 2021-02-15 20:59:51 power_api.c:287:set_to_voltage_by_steps: Set to voltage raw 1880, step by step. 2021-02-15 21:00:10 power_api.c:87:check_voltage_multi: retry time: 0 2021-02-15 21:00:11 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 18.889599 2021-02-15 21:00:12 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 18.969199 2021-02-15 21:00:13 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 18.883476 2021-02-15 21:00:13 power_api.c:50:_get_avg_voltage: average_voltage = 18.914092 2021-02-15 21:00:13 power_api.c:68:check_voltage: target_vol = 18.80, actural_vol = 18.91, check voltage passed. 2021-02-15 21:00:15 frequency.c:801:inc_freq_with_fixed_step: chain = 2, freq_start = 565, freq_end = 590, freq_step = 5, is_higher_voltage = true 2021-02-15 21:00:18 frequency.c:801:inc_freq_with_fixed_step: chain = 0, freq_start = 590, freq_end = 590, freq_step = 5, is_higher_voltage = true 2021-02-15 21:00:18 frequency.c:801:inc_freq_with_fixed_step: chain = 2, freq_start = 590, freq_end = 590, freq_step = 5, is_higher_voltage = true 2021-02-15 21:00:18 frequency.c:618:inc_asic_diff_freq_by_steps: chain = 1, start = 565, freq_step = 5 2021-02-15 21:00:21 driver-btm-api.c:528:set_timeout: freq = 595, percent = 90, hcn = 73728, timeout = 123 2021-02-15 21:00:21 power_api.c:225:set_higher_voltage_raw: higher_voltage_raw = 1900 2021-02-15 21:00:21 power_api.c:281:set_to_higher_voltage_by_steps: Set to voltage raw 1900, step by step. 2021-02-15 21:00:39 power_api.c:87:check_voltage_multi: retry time: 0 2021-02-15 21:00:40 power_api.c:37:_get_avg_voltage: chain = 0, voltage = 19.073291 2021-02-15 21:00:42 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 19.116152 2021-02-15 21:00:43 power_api.c:37:_get_avg_voltage: chain = 2, voltage = 19.067168 2021-02-15 21:00:43 power_api.c:50:_get_avg_voltage: average_voltage = 19.085537 2021-02-15 21:00:43 power_api.c:68:check_voltage: target_vol = 19.00, actural_vol = 19.09, check voltage passed. 2021-02-15 21:00:43 thread.c:793:create_check_system_status_thread: create thread 2021-02-15 21:00:43 driver-btm-api.c:1988:bitmain_soc_init: Init done! 2021-02-15 21:00:43 driver-btm-api.c:198:set_miner_status: STATUS_INIT 2021-02-15 21:00:47 driver-btm-api.c:198:set_miner_status: STATUS_OKAY 2021-02-15 21:00:48 frequency.c:216:get_ideal_hash_rate_GH: ideal_hash_rate = 55871 2021-02-15 21:00:48 frequency.c:236:get_sale_hash_rate_GH: sale_hash_rate = 53000 2021-02-15 21:00:52 driver-btm-api.c:1199:dhash_chip_send_job: Version num 4 2021-02-15 21:01:02 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:01:04 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 21:01:05 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0 2021-02-15 21:01:06 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 1 2021-02-15 21:01:09 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 21:01:10 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 21:01:11 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 21:01:12 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 21:01:13 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:01:14 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 21:01:15 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0 2021-02-15 21:01:17 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 1 2021-02-15 21:01:19 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 21:01:21 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 21:01:21 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 21:01:23 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 21:01:23 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:01:25 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 21:01:26 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0 2021-02-15 21:01:27 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 1 2021-02-15 21:01:29 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 55, reg = 28, got chain = 1, chip = 40, reg = 28 2021-02-15 21:01:29 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 1, chip = 55, reg = 28, got chain = 1, chip = 195, reg = 28 2021-02-15 21:01:30 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:01:36 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 21:01:37 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 21:01:38 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 21:01:39 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 21:01:40 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:01:41 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 21:01:42 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0 2021-02-15 21:01:43 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 1 2021-02-15 21:01:46 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 21:01:48 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 21:01:48 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 21:01:50 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 21:01:51 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:01:52 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 21:01:53 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0 2021-02-15 21:01:54 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 1 2021-02-15 21:01:57 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 21:01:58 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 21:01:59 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 21:02:00 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 21:02:01 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:02:02 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 21:02:03 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0 2021-02-15 21:02:04 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 1 2021-02-15 21:02:07 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 0 2021-02-15 21:02:09 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 0, chip = 55, reg = 1 2021-02-15 21:02:09 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 0 2021-02-15 21:02:11 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 1, chip = 40, reg = 1 2021-02-15 21:02:12 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 0 2021-02-15 21:02:13 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 2, chip = 180, reg = 1 2021-02-15 21:02:14 temperature.c:695:get_temp_info: read temp sensor failed: chain = 1, sensor = 3, chip = 195, reg = 0
|