P00P135 (OP)
|
|
March 15, 2021, 04:33:10 PM |
|
|
|
|
|
miniero
Jr. Member
Offline
Activity: 58
Merit: 4
|
|
March 15, 2021, 04:35:42 PM |
|
That's the same driver I am using. 470.05 but as mentioned above the card has to be the primary video card and have a monitor attached to it. I had a 2nd card in the same system and that card was running at 24 mhs. I removed that card and I am going to put that card into it's own system now as the primary.
Unfortunately not working here. H110 Pro BTC++ board, disabled onboard GPU, 3060 as the only GPU in the system (monitor attached) - Hash rate drops immediately after start.
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
March 15, 2021, 04:51:32 PM |
|
That's the same driver I am using. 470.05 but as mentioned above the card has to be the primary video card and have a monitor attached to it. I had a 2nd card in the same system and that card was running at 24 mhs. I removed that card and I am going to put that card into it's own system now as the primary.
Unfortunately not working here. H110 Pro BTC++ board, disabled onboard GPU, 3060 as the only GPU in the system (monitor attached) - Hash rate drops immediately after start. I'm using MSI cards. I'm not sure if that makes a difference. Also I heard that the card has to be attached directly to the motherboard. No riser.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
WhyFhy
|
|
March 15, 2021, 04:51:47 PM |
|
fuck nvidia in the you know what. so my octopus with become eth once I figure it out.
maybe smos will put it in an update.
Im making a CFX pool ,hopefully I can get users like you on our team.
|
|
|
|
Toughit
|
|
March 15, 2021, 05:19:59 PM |
|
Looks like the driver has been taken down? Unless i am not signed in right.
|
|
|
|
Juggar
Member
Offline
Activity: 242
Merit: 11
|
|
March 15, 2021, 05:26:24 PM |
|
Looks like the driver has been taken down? Unless i am not signed in right.
Should be uploaded here: https://mega.nz/file/rE1E0JCS#-xL0bc6t2UiuiZ0Vtc-I9hcqGhV0UIr0B6FKJcdy_kEI did not upload this but it works for me, got it from another thread somewhere else. This may be the only time we get a driver that will work for the 3060 that does this, its clearly communicating to the cards VBIOS and turning off the limiter. Even if it only works for directly attached cards (i.e. PCIe X16) its still a win.
|
|
|
|
miniero
Jr. Member
Offline
Activity: 58
Merit: 4
|
|
March 15, 2021, 07:49:29 PM |
|
I'm using MSI cards. I'm not sure if that makes a difference. Also I heard that the card has to be attached directly to the motherboard. No riser.
Thanks alot! The point was to put it directly in the motherboard. That worked for me (Gigabyte card). Looks like the bios identifies if the card is in a PCI 1x or PCI 16x slot - somehow this makes a difference.
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
March 15, 2021, 09:28:25 PM |
|
I'm using MSI cards. I'm not sure if that makes a difference. Also I heard that the card has to be attached directly to the motherboard. No riser.
Thanks alot! The point was to put it directly in the motherboard. That worked for me (Gigabyte card). Looks like the bios identifies if the card is in a PCI 1x or PCI 16x slot - somehow this makes a difference. Glad to hear you got it working.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
keksik
Jr. Member
Offline
Activity: 169
Merit: 1
|
|
March 15, 2021, 09:42:21 PM |
|
Im getting 49.80 MH/s with +1400 memory and 80% power limit.
Pretty insane for a card thats supposedly $329.
Some folks are saying it only works on one card, or only works on cards connected directly via X 16 and also requires a monitor plugged in.
Some are saying Zotac cards dont work at full speed.
All I know is ive got an EVGA card with a dummy HMDI plug (for plex server) and it works great. Very happy with the additional income over Octopus.
do you mean u can dualmine (two instances) with it? like phoenix for eth and other miner for octopus? i know eth dont use core, but octopus use memory a lot, right?
|
|
|
|
spinx2
Newbie
Offline
Activity: 5
Merit: 0
|
|
March 15, 2021, 09:59:01 PM |
|
Driver: https://mega.nz/file/4NRSiL6A#0jcBLJwhVfNhFrc9RgZeIa3xS5XGOl23ie6Ue439LBQInfo from someone on discord: Summary so far on 3060: -Use the 470.05 Dev Nvidia driver -Need to stick the 3060 into motherboard directly (Does not work with riser) -Must have at least pcie 3.0 enabled in bios, or set to auto -HDMI/Display port of the graphics card needs to be either connected to a monitor or dummy plug -2nd 3060 on the same mb will work as long as it is plugged into the x16 slot running x8 lanes or above with HDMI/Display port filled (not confirmed with 3 cards) -Some have confirmed working cards after fresh windows install, then installing the 470.05 dev driver -Works on ASUS STRIX/TUF/DUAL 3060, Palit 3060, EVGA black 3060, EVGA 3060 XC GAMING(12G-P5-3657-KR), Galax 3060, Gigabyte 3060 Vision OC, MSI Ventus 2x, MSI Gaming X, Zotac 3060 twin edge -Does not work on Inno3D that we know of EDIT2: It seems to have been tested on pci-X 4x slots and did not work. Only 8x and 16x work, with a dummy cable and no risers. EDIT3: Current record for maximum number of 3060 on 1 mobo is 2 cards, running on x16 and x8 full slots. EDIT4: 8x / 8x also seems to work.
|
|
|
|
ccplz
|
|
March 15, 2021, 10:21:10 PM |
|
Working on Gigabyte Eagle 3060 on 16x Pci-E slot. Getting a few incorrect shares though, about 10%, don't know if there's anything I can do to fix this. Getting 49 mh/s. Thanks everyone.
|
|
|
|
Elder III
|
|
March 15, 2021, 10:27:32 PM |
|
My wife has a 3060 that was just installed in her personal desktop 2 days ago. I've tested with the developmental driver and it's been running fine at stock settings for almost 30 minutes so far.
|
|
|
|
P00P135 (OP)
|
|
March 15, 2021, 10:37:20 PM |
|
I find it pretty hilarious that a driver on their site was a way to hack the unhackable. Didnt even need to change the Bios.
|
|
|
|
miniero
Jr. Member
Offline
Activity: 58
Merit: 4
|
|
March 15, 2021, 10:39:29 PM |
|
Working on Gigabyte Eagle 3060 on 16x Pci-E slot. Getting a few incorrect shares though, about 10%, don't know if there's anything I can do to fix this. Getting 49 mh/s. Thanks everyone.
Go down with Mem Clock a bit.
|
|
|
|
Toughit
|
|
March 15, 2021, 11:01:18 PM |
|
I can say that, with my 2009 American Mega motherboard with a 2010 bios, it does not work. only has 1 slot and the card is in the motherboard.
Actually surprised anything still works on that machine
Fresh windows, EVGA Geforce RTX 3060
|
|
|
|
keksik
Jr. Member
Offline
Activity: 169
Merit: 1
|
|
March 15, 2021, 11:10:23 PM |
|
Driver: https://mega.nz/file/4NRSiL6A#0jcBLJwhVfNhFrc9RgZeIa3xS5XGOl23ie6Ue439LBQInfo from someone on discord: Summary so far on 3060: -Use the 470.05 Dev Nvidia driver -Need to stick the 3060 into motherboard directly (Does not work with riser) -Must have at least pcie 3.0 enabled in bios, or set to auto -HDMI/Display port of the graphics card needs to be either connected to a monitor or dummy plug -2nd 3060 on the same mb will work as long as it is plugged into the x16 slot running x8 lanes or above with HDMI/Display port filled (not confirmed with 3 cards) -Some have confirmed working cards after fresh windows install, then installing the 470.05 dev driver -Works on ASUS STRIX/TUF/DUAL 3060, Palit 3060, EVGA black 3060, EVGA 3060 XC GAMING(12G-P5-3657-KR), Galax 3060, Gigabyte 3060 Vision OC, MSI Ventus 2x, MSI Gaming X, Zotac 3060 twin edge -Does not work on Inno3D that we know of EDIT2: It seems to have been tested on pci-X 4x slots and did not work. Only 8x and 16x work, with a dummy cable and no risers. EDIT3: Current record for maximum number of 3060 on 1 mobo is 2 cards, running on x16 and x8 full slots. EDIT4: 8x / 8x also seems to work. seems like there is some kind of functionality which check if monitor is connected (thats why dummy hdmi plug works) and if it is connected to motherboard. just must 2 cents, also there could be more in drivers as well.
|
|
|
|
Juggar
Member
Offline
Activity: 242
Merit: 11
|
|
March 15, 2021, 11:19:17 PM |
|
Working on Gigabyte Eagle 3060 on 16x Pci-E slot. Getting a few incorrect shares though, about 10%, don't know if there's anything I can do to fix this. Getting 49 mh/s. Thanks everyone.
Lower mem clock, not all 3060 can do 49 MH/s due to this. But most should be capable of 48. Sounds to me like the person(s) who worked on the driver or made it available wanted to make sure it could not be used in a mining farm or in a capacity such that it would support Rigs with 6 + 3060's on risers. It very clearly seems like they went through a lot to make sure there were plenty of roadblocks.
|
|
|
|
JayDDee
|
|
March 15, 2021, 11:23:02 PM |
|
seems like there is some kind of functionality which check if monitor is connected (thats why dummy hdmi plug works) and if it is connected to motherboard. just must 2 cents, also there could be more in drivers as well.
There are many checks: 1. monitor 2. PCIe lanes 3. whatever was accidentally left out of the beta driver 4. ...
|
|
|
|
Waleedzain323
Jr. Member
Offline
Activity: 288
Merit: 1
Focus Your Aim
|
|
March 16, 2021, 05:47:14 AM |
|
Nvidia provided a good hand to its gammers and production users by doing this step due to the high bitcoin prices everyone was going to mine it. This made a huge shortage of graphic cards, especially in Asia. This is a good step to make the market flow stable. But it is Bad news for the Minners because Nividia may be applie this in others cards as well.
|
e: ▀▀▀▀▀▀▄ ▀▀▀▀▄ ▀▀▄ TFSToken.com ▄▀▀ ▄▀▀▀▀ ▄▀▀▀▀▀▀ Move Your Game To The Next Level
|
|
|
sp_
Legendary
Offline
Activity: 2926
Merit: 1087
Team Black developer
|
|
March 16, 2021, 07:02:41 AM |
|
With some work the driver can be cracked.
|
|
|
|
|