HELP ! miner Love A1, mining does not start.. (flashing ethernet light)

[lucasavila2018.worker69]

the miner not start i wait for severals time reboot change the firmware and continue with the same. please if some one had the same problem please let me know

the light yellow of ethernet,  of left side, flashing severals time and the other light It does not turn on..

[1714503654]

1714503654

[1714503654]

1714503654

[1714503654]

1714503654

[BitMaxz]

What is the exact issue?

It doesn't show any sign of power like the fan spinning?

I think the lights on the ethernet are normally flashing when attaching an ethernet with the cable connected to the router even without powering the miner.

My guess maybe your PSU is dead if you have some Multitester you can check if it still has output voltage.

[FRANCKURIE]

The green light indicates that the connection to the internet is well established. So if you are sure that your miner is on,  try checking your cable or your router or the ethernet cable itself. If it doesn't work too, troubleshooting network.

[mikeywith]

It could be a faulty control board, or a bad PSU, nobody here has a crystal ball, you need to provide more details, since you flashed the miner with different firmware it means you have access to the miner's GUI, get us the kernel log ( it could be called syslog or systemlog on your miner), also post a screenshot of your pool/worker details, you can hide any sensitive data if you wish.

[lowbander801]

It could be a faulty control board, or a bad PSU, nobody here has a crystal ball, you need to provide more details, since you flashed the miner with different firmware it means you have access to the miner's GUI, get us the kernel log ( it could be called syslog or systemlog on your miner), also post a screenshot of your pool/worker details, you can hide any sensitive data if you wish.

first check the internet cables, even a good looking cable may be problematic.
then check if you can see the miner in your network and try to see if there are any readings
PSU is the next as mentioned from an0ther user
next unplug all cables and plug them again

check all system again