BzMiner - Advanced Commercial Nvidia ETH Miner v2.6 release. 0.5% Dev fee

[FP91G]

BzMiner v16.0.5

-- What's in this release (v16.0.5 hotfix)
Added rethereum + alph
Fixed rethereum + radiant duplicate/rejected radiant shares
Reduced stales on alph
Fixed rethereum + radiant auto intensity
Added intensity2 and intensity3 to config.txt (and hive)
Fixed --enable command line option

-- What's in this release (v16.0.3 update)
Slight improvement to rethereum
Slight improvement to rethereum + radiant
Fixed rethereum hung gpu/crashing on nvidia 10 and 20 series cards
Fixed rethereum + radiant hung gpu/crashing on nvidia 10 and 20 series cards
Fixed rethereum rejected shares

-- What's in this release (v16.0.2 update)
Optimized Algos:
rethereum
rethereum + radiant
+zil
ergo
ergo + radiant
etchash
ethw
octa
canxium
Fixed potential rethereum crash on rx580


https://github.com/bzminer/bzminer/releases/tag/v16.0.5
Check all links with first post from the developer

[1715464889]

1715464889

[1715464889]

1715464889

[1715464889]

1715464889

[FP91G]

BzMiner v17.0.0

-- What's in this release (v17.0.0)
New coin: decred (read decred.bat/.sh on how to mine)
Added support on Intel Arc GPUs for Decred, Rethereum
Intel enabled by default
Intel Arc support for decred, ironfish, alph, radiant rethereum, clore, xna, rvn, gamepass, neoxa and meowcoin,
Added option restart_on_reconnect
Fixed hive not liking http/https in the pool urls (https is used by default if protocol is not specified)
Fixed possible crash on Intel only rigs


https://github.com/bzminer/bzminer/releases/tag/v17.0.0
Check all links with first post from the developer

[FP91G]

BzMiner v18.0.0b1
New Coin: Dynex *beta*
- This is a very early beta, expect bugs~
- Nvidia hashrate is not fully optimized in this beta
- Special thanks to doktor from SRB for providing his AMD CN POW kernel
- Support for nvidia, amd polaris and later. Intel coming in later updates
- It appears that polaris and vega cards are not working in this beta
https://www.bzminer.com/betas/v18.0.0b1/


The link to this site is in the official github
https://github.com/bzminer

Check all links with first post from the developer

[Cee2]

Any plans to add P3D (3DPass)?

[FP91G]

BzMiner v18.0.0b4
New Coin: Dynex *beta*
x Added support for older AMD cards (580, vegas, 380, 470)
x Fixed the stack smashing error on linux rigs
- This is a very early beta, expect bugs~
- Nvidia hashrate is not fully optimized in this beta
- Special thanks to doktor from SRB for providing his AMD CN POW kernel
- Support for nvidia, amd polaris and later. Intel coming in later updates
https://www.bzminer.com/betas/v18.0.0b4/


The link to this site is in the official github
https://github.com/bzminer

Check all links with first post from the developer

[FP91G]

BzMiner v18.0.0
New coin: Dynex (See notes below)
--- Dynex Notes ---

Nvidia POUW hashrate will be improved in later release
Intel ARC support for only POW
AMD mi25 and vega cards are not working in this release, will fix in hotfix shortly
-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

This is an array of values, one for each gpu

In config.txt (hiveos), an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

A value of 0.0 will mine ONLY POUW

A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!
https://github.com/bzminer/bzminer/releases/tag/v18.0.0

Check all links with first post from the developer!

[FP91G]

Release v19.0.1 of BzMiner.

-- What's in this hotfix (v19.0.1)
Support for Karlsen on Intel arc
Fixed AMD on Karlsen
Other bug fixes

-- What's in this release (v19.0.0)
New coin: Karlsen (Supports solo mining without bridge)
For dynex, replaced pool hr column with pow hr
Added dynex_pow_ratio config option in the cfg column
Added support for dynex_pow_ratio option in hive*
zil uses epoch 1 by default (prevents initial dag recreation on first zil window)
-- dynex_pow_ratio --
For hive users, in extra config arguments, put the dynex_pow_ratio array in quotes, like:
"dynex_pow_ratio": "[1.0, 1.0, 1.0]"
https://github.com/bzminer/bzminer/releases/tag/v19.0.1

Check all links with first post from the developer!

[FP91G]

BzMiner v19.2.0

-- What's in this release (v19.2.0)
x Significant Dynex hashrate improvements for most cards (nvidia and amd)
x Fixed Nexa on nvidia cards
x Showing more Dynex stats to help tuning dynex_pow_ratio
x Zil defaults to epoch 1 now
x Other bug fixes
x Dynex oc's may likely need to be re-adjusted from other miners/previous versions

--- Dynex Notes ---

Fine tuning dynex_pow_ratio will likely give you better results than default settings
intensity option will adjust how much vram is allowed to be used
Intel ARC support still only for POW

https://github.com/bzminer/bzminer/releases/tag/v19.2.0

Check all links with first post from the developer!

[FP91G]

BzMiner v19.2.1


-- What's in this release (v19.2.1 Hotfix)
x Dynex: reduced rejected shares
x Dynex: updated dynex_pow_ratio to be more predictable
x Dynex: dynex_pow_ratio 1.0 will not always give best results. Tune between 0.0 and 1.0 to find best efficiency
x Dynex: dynex_pow_ratio 2.0 will autotune, better hashrate/efficiency for pow


https://github.com/bzminer/bzminer/releases/tag/v19.2.1

Check all links with first post from the developer!

[FP91G]

BzMiner v20.0.0

What's in this release (v20.0.0)
x Decred: Added pool support
x New coin: nexellia
x New coin: dint (DinarTether)
x New coin: Larissa

--- Dynex Notes ---

Fine tuning dynex_pow_ratio will likely give you better results than default settings
intensity option will adjust how much vram is allowed to be used
Intel ARC support still only for POW
-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

This is an array of values, one for each gpu

In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

A value of 0.0 will mine ONLY POUW

A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

https://github.com/bzminer/bzminer/releases/tag/v20.0.0

Check all links with first post from the developer!

[energy_xxx]

bzminer-v21.1.3b3

(Warthog: Optimized and fixed some stability issues. Warthog: Added CPU metrics. Warthog: new option warthog_cache_config default is 0. Warthog: option warthog_max_ram_gb is now a decimal. NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize)


https://github.com/bzminer/bzminer/releases/tag/v21.1.3b3

I didn't get good results

ryzen9 7900 rx6700
ryzen51600 nvidia1660 super and 1660 ti

16gb ram and 8gb ram

in test results

bzminer v21.1.1

gave better results

The problem with v21.1.1 is

While accpool also works better

Woolypooly has little problem with 6 GB cards.

Maybe it can give better results on other hardware, I don't know.

thanks
bz.miner team

[energy_xxx]

BzMiner v21.1.4b8 BETA!

This is a beta bz version:
x Warthog: Added node RPC support (to connect to node, use http://ipaddress:port)
x Warthog: Fixed crashing from previous beta
x Warthog: Optimized and fixed some stability issues
x Warthog: Added CPU metrics (only linux has power and temp currently)
x Warthog: new option warthog_cache_config default is 0
x Warthog: option warthog_max_ram_gb is now a decimal
x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize
x NOTE: Please reset all warthog_verus_hr_target configs


https://github.com/bzminer/bzminer/releases/tag/v21.1.4b8

[energy_xxx]

BzMiner v21.1.5

-- What's in this release (v21.1.5)
x New Coin: aidepin
x New Coin: aipg
x Warthog: Optimized and fixed some stability issues
x Warthog: Fixed crashing from previous beta
x Warthog: Added CPU metrics (only linux has power and temp currently)
x Warthog: Fixed CPUs showing up as GPU
x Dynex: Fixed crashes every hour or so
x New option: warthog_cache_config default is 0
x New option: warthog_max_ram_gb is now a decimal
x New option: disable_cpu_metrics set this to true if you experience crashing at startup
x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize
x NOTE: Please reset all warthog_verus_hr_target configs


https://github.com/bzminer/bzminer/releases/tag/v21.1.5