Lee1112 (OP)
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 05, 2021, 02:02:51 AM Last edit: November 05, 2021, 02:18:55 AM by Lee1112 |
|
New to mining. I cleaned my antminer S9 with compressed air as the previous owner had not done it in a long time. After that I booted it up and now have 0 hash power. I'll post my kernel log. Anyone have an idea what's going on? It was working fine (just running a little hot which is why I cleaned it) before the cleaning. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Xilinx Zynq [ 0.000000] cma: CMA: reserved 128 MiB at 27800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 258048 [ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map e6fd8000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 496 pages used for memmap [ 0.000000] HighMem zone: 63488 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9344 r8192 d15232 u32768 [ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528 [ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 884044K/1032192K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 148148K reserved, 253952K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB) [ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB) [ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB) [ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ps7-slcr mapped to f0004000 [ 0.000000] zynq_clock_init: clkc starts at f0004100 [ 0.000000] Zynq clock init [ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns [ 0.000294] ps7-ttc #0 at f0006000, irq=43 [ 0.000594] Console: colour dummy device 80x30 [ 0.000629] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328) [ 0.040197] pid_max: default: 32768 minimum: 301 [ 0.040407] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.040428] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.042603] CPU: Testing write buffer coherency: ok [ 0.042926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.042983] Setting up static identity map for 0x4d3ec0 - 0x4d3f18 [ 0.043204] L310 cache controller enabled [ 0.043223] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB [ 0.120987] CPU1: Booted secondary processor [ 0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.210347] Brought up 2 CPUs [ 0.210366] SMP: Total of 2 processors activated. [ 0.210374] CPU: All CPU(s) started in SVC mode. [ 0.211034] devtmpfs: initialized [ 0.213473] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.214655] regulator-dummy: no parameters [ 0.222045] NET: Registered protocol family 16 [ 0.224210] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.226479] cpuidle: using governor ladder [ 0.226492] cpuidle: using governor menu [ 0.233846] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered [ 0.235361] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.235375] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.235482] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000 [ 0.257912] bio: create slab <bio-0> at 0 [ 0.259284] vgaarb: loaded [ 0.259972] SCSI subsystem initialized [ 0.261482] usbcore: registered new interface driver usbfs [ 0.261666] usbcore: registered new interface driver hub [ 0.261895] usbcore: registered new device driver usb [ 0.262414] media: Linux media interface: v0.10 [ 0.262578] Linux video capture interface: v2.00 [ 0.262815] pps_core: LinuxPPS API ver. 1 registered [ 0.262827] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.262950] PTP clock support registered [ 0.263313] EDAC MC: Ver: 3.0.0 [ 0.264348] Advanced Linux Sound Architecture Driver Initialized. [ 0.267075] DMA-API: preallocated 4096 debug entries [ 0.267089] DMA-API: debugging enabled by kernel config [ 0.267153] Switched to clocksource arm_global_timer [ 0.287091] NET: Registered protocol family 2 [ 0.288175] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.288271] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.288430] TCP: Hash tables configured (established 8192 bind 8192) [ 0.288486] TCP: reno registered [ 0.288505] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.288554] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.288805] NET: Registered protocol family 1 [ 0.289161] RPC: Registered named UNIX socket transport module. [ 0.289174] RPC: Registered udp transport module. [ 0.289182] RPC: Registered tcp transport module. [ 0.289191] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.289202] PCI: CLS 0 bytes, default 64 [ 0.289636] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.291635] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.292998] bounce pool size: 64 pages [ 0.293868] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.294069] msgmni has been set to 1486 [ 0.294833] io scheduler noop registered [ 0.294846] io scheduler deadline registered [ 0.294895] io scheduler cfq registered (default) [ 0.306399] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208 [ 0.306420] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.428036] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps [ 0.999975] console [ttyPS0] enabled [ 1.004210] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000 [ 1.011836] [drm] Initialized drm 1.1.0 20060810 [ 1.028947] brd: module loaded [ 1.038387] loop: module loaded [ 1.047851] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.053602] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.061495] libphy: XEMACPS mii bus: probed [ 1.065859] ------------- phy_id = 0x3625e62 [ 1.070582] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54 [ 1.079414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.086029] ehci-pci: EHCI PCI platform driver [ 1.093279] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing? [ 1.100110] usbcore: registered new interface driver usb-storage [ 1.106948] mousedev: PS/2 mouse device common for all mice [ 1.113069] i2c /dev entries driver [ 1.120007] zynq-edac f8006000.ps7-ddrc: ecc not enabled [ 1.125488] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 1.131402] Xilinx Zynq CpuIdle Driver started [ 1.136242] sdhci: Secure Digital Host Controller Interface driver [ 1.142452] sdhci: Copyright(c) Pierre Ossman [ 1.146721] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.153546] mmc0: no vqmmc regulator found [ 1.157588] mmc0: no vmmc regulator found [ 1.197171] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA [ 1.205868] usbcore: registered new interface driver usbhid [ 1.211381] usbhid: USB HID core driver [ 1.216076] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.222366] nand: Micron MT29F2G08ABAEAWP [ 1.226337] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 1.232293] Bad block table found at page 131008, version 0x01 [ 1.238534] Bad block table found at page 130944, version 0x01 [ 1.244581] 3 ofpart partitions found on MTD device pl353-nand [ 1.250358] Creating 3 MTD partitions on "pl353-nand": [ 1.255458] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel" [ 1.263509] 0x000002000000-0x00000b000000 : "angstram-rootfs" [ 1.270837] 0x00000b000000-0x000010000000 : "upgrade-rootfs" [ 1.279551] nf_conntrack version 0.5.0 (15861 buckets, 63444 max) [ 1.286227] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.291549] TCP: cubic registered [ 1.294780] NET: Registered protocol family 17 [ 1.299483] Registering SWP/SWPB emulation handler [ 1.305375] regulator-dummy: disabling [ 1.309729] UBI: attaching mtd1 to ubi0 [ 1.837340] UBI: scanning is finished [ 1.849133] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0 [ 1.856184] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.862980] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.869656] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.876494] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0 [ 1.882504] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.889614] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1925294910 [ 1.898645] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40 [ 1.907861] UBI: background thread "ubi_bgt0d" started, PID 1085 [ 1.907866] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.911819] ALSA device list: [ 1.911822] No soundcards found. [ 1.928150] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087 [ 1.957101] UBIFS: recovery needed [ 2.928455] UBIFS: recovery completed [ 2.932131] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.938081] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.947181] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.957057] UBIFS: reserved for root: 0 bytes (0 KiB) [ 2.962110] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2E2157C-794A-4932-956B-E22078A65162, small LPT model [ 2.973618] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 2.980814] devtmpfs: mounted [ 2.983939] Freeing unused kernel memory: 208K (c06e9000 - c071d000) [ 3.821243] random: dd urandom read with 0 bits of entropy available [ 4.207195] [ 4.207195] bcm54xx_config_init [ 4.817184] [ 4.817184] bcm54xx_config_init [ 7.818032] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 7.824124] xemacps e000b000.ps7-ethernet: link up (100/FULL) [ 36.341694] In axi fpga driver! [ 36.344795] request_mem_region OK! [ 36.348156] AXI fpga dev virtual address is 0xf020e000 [ 36.353261] *base_vir_addr = 0xc51e [ 36.368014] In fpga mem driver! [ 36.371289] request_mem_region OK! [ 36.374881] fpga mem virtual address is 0xf3000000 [ 37.194551] [ 37.194551] bcm54xx_config_init [ 37.844455] [ 37.844455] bcm54xx_config_init [ 40.844969] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz [ 40.850985] xemacps e000b000.ps7-ethernet: link up (100/FULL) Detect 1GB control board of XILINX Miner Type = S9 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x0000ffff Check chain[5] PIC fw version=0x03 Check chain[6] PIC fw version=0x03 Check chain[7] PIC fw version=0x03 Fix freq=550 Chain[5] voltage_pic=193 value=830 Fix freq=550 Chain[6] voltage_pic=193 value=830 Fix freq=550 Chain[7] voltage_pic=193 value=830 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 Chain[J6] has 33 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 33 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 33 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 33 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 33 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 33 asic set_reset_hashboard = 0x00000020 set_reset_hashboard = 0x00000000 retry Chain[J6] has 33 asic Chain[J7] has 63 asic Chain[J8] has 63 asic Chain[J6] has no freq in PIC, set default freq=550M Chain[J6] has no core num in PIC Chain[J7] has no freq in PIC, set default freq=550M Chain[J7] has no core num in PIC Chain[J8] has no freq in PIC, set default freq=550M Chain[J8] has no core num in PIC
Miner fix freq ... read PIC voltage=940 on chain[5] Chain:5 chipnum=33 Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456 Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456 Asic[16]:456 Asic[17]:456 Asic[18]:456 Asic[19]:456 Asic[20]:456 Asic[21]:456 Asic[22]:456 Asic[23]:456 Asic[24]:456 Asic[25]:456 Asic[26]:456 Asic[27]:456 Asic[28]:456 Asic[29]:456 Asic[30]:456 Asic[31]:456 Asic[32]:456
Chain:5 max freq=456 Chain:5 min freq=456
read PIC voltage=940 on chain[6] Chain:6 chipnum=63 Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456 Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456 Asic[16]:456 Asic[17]:456 Asic[18]:456 Asic[19]:456 Asic[20]:456 Asic[21]:456 Asic[22]:456 Asic[23]:456 Asic[24]:456 Asic[25]:456 Asic[26]:456 Asic[27]:456 Asic[28]:456 Asic[29]:456 Asic[30]:456 Asic[31]:456 Asic[32]:456 Asic[33]:456 Asic[34]:456 Asic[35]:456 Asic[36]:456 Asic[37]:456 Asic[38]:456 Asic[39]:456 Asic[40]:456 Asic[41]:456 Asic[42]:456 Asic[43]:456 Asic[44]:456 Asic[45]:456 Asic[46]:456 Asic[47]:456 Asic[48]:456 Asic[49]:456 Asic[50]:456 Asic[51]:456 Asic[52]:456 Asic[53]:456 Asic[54]:456 Asic[55]:456 Asic[56]:456 Asic[57]:456 Asic[58]:456 Asic[59]:456 Asic[60]:456 Asic[61]:456 Asic[62]:456 Chain:6 max freq=456 Chain:6 min freq=456
read PIC voltage=940 on chain[7] Chain:7 chipnum=63 Asic[ 0]:456 Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456 Asic[ 8]:456 Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456 Asic[16]:456 Asic[17]:456 Asic[18]:456 Asic[19]:456 Asic[20]:456 Asic[21]:456 Asic[22]:456 Asic[23]:456 Asic[24]:456 Asic[25]:456 Asic[26]:456 Asic[27]:456 Asic[28]:456 Asic[29]:456 Asic[30]:456 Asic[31]:456 Asic[32]:456 Asic[33]:456 Asic[34]:456 Asic[35]:456 Asic[36]:456 Asic[37]:456 Asic[38]:456 Asic[39]:456 Asic[40]:456 Asic[41]:456 Asic[42]:456 Asic[43]:456 Asic[44]:456 Asic[45]:456 Asic[46]:456 Asic[47]:456 Asic[48]:456 Asic[49]:456 Asic[50]:456 Asic[51]:456 Asic[52]:456 Asic[53]:456 Asic[54]:456 Asic[55]:456 Asic[56]:456 Asic[57]:456 Asic[58]:456 Asic[59]:456 Asic[60]:456 Asic[61]:456 Asic[62]:456 Chain:7 max freq=456 Chain:7 min freq=456
max freq = 456 set baud=2 Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28 chain[6] temp chip I2C addr=0x98 chain[6] has no middle temp, use special fix mode. Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55 New offset Chain[6] chip[244] local:17 remote:18 offset:28 Chain[J7] chip[244] get middle temp offset=28 typeID=55 Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28 chain[7] temp chip I2C addr=0x98 chain[7] has no middle temp, use special fix mode. Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55 New offset Chain[7] chip[244] local:19 remote:19 offset:29 Chain[J8] chip[244] get middle temp offset=29 typeID=55 Chain[J6] set working voltage=830 [193] Chain[J7] set working voltage=830 [193] Chain[J8] set working voltage=830 [193] setStartTimePoint total_tv_start_sys=249 total_tv_end_sys=250 restartNum = 2 , auto-reinit enabled... do read_temp_func once... do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63) Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=53.0830 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 Asic[33]=0.00000 get RT hashrate from Chain[6]: (asic index start from 1-63) Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=392.821 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 Asic[57]=371.581 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
get RT hashrate from Chain[7]: (asic index start from 1-63) Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=392.821 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 Asic[57]=371.581 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63) Check Chain[J7] ASIC RT error: (asic index start from 1-63) Asic[29]=392.821000 Asic[57]=371.581000 Check Chain[J8] ASIC RT error: (asic index start from 1-63) Asic[29]=392.821000 Asic[57]=371.581000 Done check_asic_reg do read temp on Chain[5] Done read temp on Chain[5] do read temp on Chain[6] Chain[6] Chip[62] TempTypeID=55 middle offset=28 read failed, old value: Chain[6] Chip[62] local Temp=0 read failed on Chain[6] Chip[62] middle Temp old value:0 Special fix Chain[6] Chip[62] middle Temp = 15 Done read temp on Chain[6] do read temp on Chain[7] Chain[7] Chip[62] TempTypeID=55 middle offset=29 read failed, old value: Chain[7] Chip[62] local Temp=0 read failed on Chain[7] Chip[62] middle Temp old value:0 Special fix Chain[7] Chip[62] middle Temp = 15 Done read temp on Chain[7] All temp chips failed, set fixed full fan speed FAN PWM: 100 read_temp_func Done! CRC error counter=522
|