Cleaned Antminer S9 (with compressed air) Hashboards not showing up

New to mining. I cleaned my antminer S9 with compressed air as the previous owner had not done it in a long time. After that I booted it up and now have 0 hash power. I'll post my kernel log. Anyone have an idea what's going on? It was working fine (just running a little hot which is why I cleaned it) before the cleaning.
Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884044K/1032192K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 148148K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000294] ps7-ttc #0 at f0006000, irq=43
[    0.000594] Console: colour dummy device 80x30
[    0.000629] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040407] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040428] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042603] CPU: Testing write buffer coherency: ok
[    0.042926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042983] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.043204] L310 cache controller enabled
[    0.043223] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120987] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210347] Brought up 2 CPUs
[    0.210366] SMP: Total of 2 processors activated.
[    0.210374] CPU: All CPU(s) started in SVC mode.
[    0.211034] devtmpfs: initialized
[    0.213473] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214655] regulator-dummy: no parameters
[    0.222045] NET: Registered protocol family 16
[    0.224210] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226479] cpuidle: using governor ladder
[    0.226492] cpuidle: using governor menu
[    0.233846] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235361] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235375] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235482] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257912] bio: create slab <bio-0> at 0
[    0.259284] vgaarb: loaded
[    0.259972] SCSI subsystem initialized
[    0.261482] usbcore: registered new interface driver usbfs
[    0.261666] usbcore: registered new interface driver hub
[    0.261895] usbcore: registered new device driver usb
[    0.262414] media: Linux media interface: v0.10
[    0.262578] Linux video capture interface: v2.00
[    0.262815] pps_core: LinuxPPS API ver. 1 registered
[    0.262827] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262950] PTP clock support registered
[    0.263313] EDAC MC: Ver: 3.0.0
[    0.264348] Advanced Linux Sound Architecture Driver Initialized.
[    0.267075] DMA-API: preallocated 4096 debug entries
[    0.267089] DMA-API: debugging enabled by kernel config
[    0.267153] Switched to clocksource arm_global_timer
[    0.287091] NET: Registered protocol family 2
[    0.288175] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.288271] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.288430] TCP: Hash tables configured (established 8192 bind 8192)
[    0.288486] TCP: reno registered
[    0.288505] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.288554] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288805] NET: Registered protocol family 1
[    0.289161] RPC: Registered named UNIX socket transport module.
[    0.289174] RPC: Registered udp transport module.
[    0.289182] RPC: Registered tcp transport module.
[    0.289191] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289202] PCI: CLS 0 bytes, default 64
[    0.289636] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291635] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292998] bounce pool size: 64 pages
[    0.293868] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.294069] msgmni has been set to 1486
[    0.294833] io scheduler noop registered
[    0.294846] io scheduler deadline registered
[    0.294895] io scheduler cfq registered (default)
[    0.306399] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306420] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.428036] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.999975] console [ttyPS0] enabled
[    1.004210] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.011836] [drm] Initialized drm 1.1.0 20060810
[    1.028947] brd: module loaded
[    1.038387] loop: module loaded
[    1.047851] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.053602] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.061495] libphy: XEMACPS mii bus: probed
[    1.065859] ------------- phy_id = 0x3625e62
[    1.070582] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.079414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.086029] ehci-pci: EHCI PCI platform driver
[    1.093279] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.100110] usbcore: registered new interface driver usb-storage
[    1.106948] mousedev: PS/2 mouse device common for all mice
[    1.113069] i2c /dev entries driver
[    1.120007] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.125488] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.131402] Xilinx Zynq CpuIdle Driver started
[    1.136242] sdhci: Secure Digital Host Controller Interface driver
[    1.142452] sdhci: Copyright(c) Pierre Ossman
[    1.146721] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.153546] mmc0: no vqmmc regulator found
[    1.157588] mmc0: no vmmc regulator found
[    1.197171] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205868] usbcore: registered new interface driver usbhid
[    1.211381] usbhid: USB HID core driver
[    1.216076] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222366] nand: Micron MT29F2G08ABAEAWP
[    1.226337] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232293] Bad block table found at page 131008, version 0x01
[    1.238534] Bad block table found at page 130944, version 0x01
[    1.244581] 3 ofpart partitions found on MTD device pl353-nand
[    1.250358] Creating 3 MTD partitions on "pl353-nand":
[    1.255458] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263509] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270837] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279551] nf_conntrack version 0.5.0 (15861 buckets, 63444 max)
[    1.286227] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.291549] TCP: cubic registered
[    1.294780] NET: Registered protocol family 17
[    1.299483] Registering SWP/SWPB emulation handler
[    1.305375] regulator-dummy: disabling
[    1.309729] UBI: attaching mtd1 to ubi0
[    1.837340] UBI: scanning is finished
[    1.849133] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.856184] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.862980] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.869656] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.876494] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.882504] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.889614] UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 1925294910
[    1.898645] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.907861] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.907866] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.911819] ALSA device list:
[    1.911822]   No soundcards found.
[    1.928150] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    1.957101] UBIFS: recovery needed
[    2.928455] UBIFS: recovery completed
[    2.932131] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.938081] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.947181] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.957057] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.962110] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2E2157C-794A-4932-956B-E22078A65162, small LPT model
[    2.973618] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.980814] devtmpfs: mounted
[    2.983939] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    3.821243] random: dd urandom read with 0 bits of entropy available
[    4.207195] 
[    4.207195] bcm54xx_config_init
[    4.817184] 
[    4.817184] bcm54xx_config_init
[    7.818032] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.824124] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   36.341694] In axi fpga driver!
[   36.344795] request_mem_region OK!
[   36.348156] AXI fpga dev virtual address is 0xf020e000
[   36.353261] *base_vir_addr = 0xc51e
[   36.368014] In fpga mem driver!
[   36.371289] request_mem_region OK!
[   36.374881] fpga mem virtual address is 0xf3000000
[   37.194551] 
[   37.194551] bcm54xx_config_init
[   37.844455] 
[   37.844455] bcm54xx_config_init
[   40.844969] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   40.850985] xemacps e000b000.ps7-ethernet: link up (100/FULL)
Detect 1GB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=550 Chain[5] voltage_pic=193 value=830
Fix freq=550 Chain[6] voltage_pic=193 value=830
Fix freq=550 Chain[7] voltage_pic=193 value=830
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 33 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 33 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 33 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 33 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 33 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 33 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 33 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=550M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=550M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=550M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=33
Asic[ 0]:456 
Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456 Asic[ 8]:456 
Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456 Asic[16]:456 
Asic[17]:456 Asic[18]:456 Asic[19]:456 Asic[20]:456 Asic[21]:456 Asic[22]:456 Asic[23]:456 Asic[24]:456 
Asic[25]:456 Asic[26]:456 Asic[27]:456 Asic[28]:456 Asic[29]:456 Asic[30]:456 Asic[31]:456 Asic[32]:456 

Chain:5 max freq=456
Chain:5 min freq=456

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:456 
Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456 Asic[ 8]:456 
Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456 Asic[16]:456 
Asic[17]:456 Asic[18]:456 Asic[19]:456 Asic[20]:456 Asic[21]:456 Asic[22]:456 Asic[23]:456 Asic[24]:456 
Asic[25]:456 Asic[26]:456 Asic[27]:456 Asic[28]:456 Asic[29]:456 Asic[30]:456 Asic[31]:456 Asic[32]:456 
Asic[33]:456 Asic[34]:456 Asic[35]:456 Asic[36]:456 Asic[37]:456 Asic[38]:456 Asic[39]:456 Asic[40]:456 
Asic[41]:456 Asic[42]:456 Asic[43]:456 Asic[44]:456 Asic[45]:456 Asic[46]:456 Asic[47]:456 Asic[48]:456 
Asic[49]:456 Asic[50]:456 Asic[51]:456 Asic[52]:456 Asic[53]:456 Asic[54]:456 Asic[55]:456 Asic[56]:456 
Asic[57]:456 Asic[58]:456 Asic[59]:456 Asic[60]:456 Asic[61]:456 Asic[62]:456 
Chain:6 max freq=456
Chain:6 min freq=456

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:456 
Asic[ 1]:456 Asic[ 2]:456 Asic[ 3]:456 Asic[ 4]:456 Asic[ 5]:456 Asic[ 6]:456 Asic[ 7]:456 Asic[ 8]:456 
Asic[ 9]:456 Asic[10]:456 Asic[11]:456 Asic[12]:456 Asic[13]:456 Asic[14]:456 Asic[15]:456 Asic[16]:456 
Asic[17]:456 Asic[18]:456 Asic[19]:456 Asic[20]:456 Asic[21]:456 Asic[22]:456 Asic[23]:456 Asic[24]:456 
Asic[25]:456 Asic[26]:456 Asic[27]:456 Asic[28]:456 Asic[29]:456 Asic[30]:456 Asic[31]:456 Asic[32]:456 
Asic[33]:456 Asic[34]:456 Asic[35]:456 Asic[36]:456 Asic[37]:456 Asic[38]:456 Asic[39]:456 Asic[40]:456 
Asic[41]:456 Asic[42]:456 Asic[43]:456 Asic[44]:456 Asic[45]:456 Asic[46]:456 Asic[47]:456 Asic[48]:456 
Asic[49]:456 Asic[50]:456 Asic[51]:456 Asic[52]:456 Asic[53]:456 Asic[54]:456 Asic[55]:456 Asic[56]:456 
Asic[57]:456 Asic[58]:456 Asic[59]:456 Asic[60]:456 Asic[61]:456 Asic[62]:456 
Chain:7 max freq=456
Chain:7 min freq=456

max freq = 456
set baud=2
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:17 remote:18 offset:28 
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:19 remote:19 offset:29 
Chain[J8] chip[244] get middle temp offset=29 typeID=55
Chain[J6] set working voltage=830 [193]
Chain[J7] set working voltage=830 [193]
Chain[J8] set working voltage=830 [193]
setStartTimePoint total_tv_start_sys=249 total_tv_end_sys=250
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=53.0830 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=392.821 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 
Asic[57]=371.581 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=392.821 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000 
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000 
Asic[57]=371.581 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=392.821000
Asic[57]=371.581000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[29]=392.821000
Asic[57]=371.581000
Done check_asic_reg
do read temp on Chain[5]
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=28
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:0
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=29
read failed, old value: Chain[7] Chip[62] local Temp=0
read failed on Chain[7] Chip[62] middle Temp old value:0
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
All temp chips failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=522