S9 not hashing after changing control board

BazeJass (OP)

Newbie

Offline

Activity: 7
Merit: 2

S9 not hashing after changing control board

May 25, 2022, 02:50:11 PM
Last edit: May 26, 2022, 05:27:20 AM by BazeJass

I recently changed my control board as the older one smoked, however, no matter what I try (Flashing & upgrading) I am unable to see any hashing from my S9.
Adding logs -

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000292] ps7-ttc #0 at df804000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000623] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040404] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040423] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042576] CPU: Testing write buffer coherency: ok
[    0.042884] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042939] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043158] L310 cache controller enabled
[    0.043178] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120984] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210349] Brought up 2 CPUs
[    0.210368] SMP: Total of 2 processors activated.
[    0.210377] CPU: All CPU(s) started in SVC mode.
[    0.211047] devtmpfs: initialized
[    0.213474] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214659] regulator-dummy: no parameters
[    0.221988] NET: Registered protocol family 16
[    0.224253] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226514] cpuidle: using governor ladder
[    0.226527] cpuidle: using governor menu
[    0.233880] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235390] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235404] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235515] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.256978] bio: create slab <bio-0> at 0
[    0.258343] vgaarb: loaded
[    0.259026] SCSI subsystem initialized
[    0.259898] usbcore: registered new interface driver usbfs
[    0.260075] usbcore: registered new interface driver hub
[    0.260586] usbcore: registered new device driver usb
[    0.261904] media: Linux media interface: v0.10
[    0.262096] Linux video capture interface: v2.00
[    0.262350] pps_core: LinuxPPS API ver. 1 registered
[    0.262362] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262483] PTP clock support registered
[    0.262832] EDAC MC: Ver: 3.0.0
[    0.264039] Advanced Linux Sound Architecture Driver Initialized.
[    0.266769] DMA-API: preallocated 4096 debug entries
[    0.266783] DMA-API: debugging enabled by kernel config
[    0.266849] Switched to clocksource arm_global_timer
[    0.286687] NET: Registered protocol family 2
[    0.287389] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287446] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287531] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287577] TCP: reno registered
[    0.287593] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287623] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.287847] NET: Registered protocol family 1
[    0.288181] RPC: Registered named UNIX socket transport module.
[    0.288193] RPC: Registered udp transport module.
[    0.288202] RPC: Registered tcp transport module.
[    0.288210] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288222] PCI: CLS 0 bytes, default 64
[    0.288646] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290630] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292683] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.292867] msgmni has been set to 967
[    0.293621] io scheduler noop registered
[    0.293634] io scheduler deadline registered
[    0.293675] io scheduler cfq registered (default)
[    0.307909] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.307929] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431147] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.998279] console [ttyPS0] enabled
[    1.002529] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.010155] [drm] Initialized drm 1.1.0 20060810
[    1.027238] brd: module loaded
[    1.036591] loop: module loaded
[    1.045981] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.051960] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.059826] libphy: XEMACPS mii bus: probed
[    1.064196] ------------- phy_id = 0x3625e62
[    1.069138] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.077754] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.084368] ehci-pci: EHCI PCI platform driver
[    1.091607] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.098426] usbcore: registered new interface driver usb-storage
[    1.105259] mousedev: PS/2 mouse device common for all mice
[    1.111385] i2c /dev entries driver
[    1.118309] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.123782] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.129700] Xilinx Zynq CpuIdle Driver started
[    1.134553] sdhci: Secure Digital Host Controller Interface driver
[    1.140733] sdhci: Copyright(c) Pierre Ossman
[    1.145007] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.151826] mmc0: no vqmmc regulator found
[    1.155842] mmc0: no vmmc regulator found
[    1.196869] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205571] usbcore: registered new interface driver usbhid
[    1.211085] usbhid: USB HID core driver
[    1.215779] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222080] nand: Micron MT29F2G08ABAEAWP
[    1.226046] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231983] Bad block table found at page 131008, version 0x01
[    1.238205] Bad block table found at page 130944, version 0x01
[    1.244253] 3 ofpart partitions found on MTD device pl353-nand
[    1.250037] Creating 3 MTD partitions on "pl353-nand":
[    1.255128] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263192] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270481] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281235] TCP: cubic registered
[    1.284471] NET: Registered protocol family 17
[    1.289175] Registering SWP/SWPB emulation handler
[    1.295041] regulator-dummy: disabling
[    1.299350] UBI: attaching mtd1 to ubi0
[    1.824199] UBI: scanning is finished
[    1.835809] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842891] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849653] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856317] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863195] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869176] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876283] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.885326] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894541] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.894547] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898497] ALSA device list:
[    1.898501]   No soundcards found.
[    1.914831] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.944066] UBIFS: recovery needed
[    2.041463] UBIFS: recovery completed
[    2.045133] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.051078] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.060184] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.070073] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.075103] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.086139] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.093336] devtmpfs: mounted
[    2.096444] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.928981] random: dd urandom read with 1 bits of entropy available
[    3.306901] 
[    3.306901] bcm54xx_config_init
[    4.366866] 
[    4.366866] bcm54xx_config_init
[    8.367734] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.373822] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   26.117747] In axi fpga driver!
[   26.120819] request_mem_region OK!
[   26.124208] AXI fpga dev virtual address is 0xdf9fe000
[   26.129347] *base_vir_addr = 0xc51e
[   26.144008] In fpga mem driver!
[   26.147390] request_mem_region OK!
[   26.150899] fpga mem virtual address is 0xe2000000
[   26.936886] 
[   26.936886] bcm54xx_config_init
[   28.036877] 
[   28.036877] bcm54xx_config_init
[   32.037728] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   32.043751] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  343.842808] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f79000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d72000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 80026c8a7910481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000a0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0xff
main.c:2282: Check chain[7] PIC fw version=0xff
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
main.c:8961: chain[5]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[5] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[5] PIC fw version=0xff
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
main.c:8961: chain[7]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[7] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[7] PIC fw version=0xff
main.c:9183: get PIC voltage=255 on chain[5], value=790
main.c:9183: get PIC voltage=255 on chain[7], value=790
main.c:9349: chain[5] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9349: chain[7] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 2
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 2, total chain num = 2 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1891 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 80026c8a7910481c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0xff
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0xff
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 2
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=255 value=790
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=255 value=790
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:5119:set_frequency: max freq = 100
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=410 total_tv_end_sys=411
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = -100
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=0

philipma1957

Legendary

Online

Activity: 4340
Merit: 9016

'The right to privacy matters'

Re: S9 not hashing after changing control board

May 25, 2022, 03:04:32 PM

Quote from: BazeJass on May 25, 2022, 02:50:11 PM

I recently changed my control board as the older one smoked, however, no matter what I try (Flashing & upgrading) I am unable to see any hashing from my S9.
Adding logs -

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000292] ps7-ttc #0 at df804000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000623] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040404] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040423] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042576] CPU: Testing write buffer coherency: ok
[    0.042884] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042939] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043158] L310 cache controller enabled
[    0.043178] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120984] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210349] Brought up 2 CPUs
[    0.210368] SMP: Total of 2 processors activated.
[    0.210377] CPU: All CPU(s) started in SVC mode.
[    0.211047] devtmpfs: initialized
[    0.213474] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214659] regulator-dummy: no parameters
[    0.221988] NET: Registered protocol family 16
[    0.224253] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226514] cpuidle: using governor ladder
[    0.226527] cpuidle: using governor menu
[    0.233880] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235390] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235404] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235515] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.256978] bio: create slab <bio-0> at 0
[    0.258343] vgaarb: loaded
[    0.259026] SCSI subsystem initialized
[    0.259898] usbcore: registered new interface driver usbfs
[    0.260075] usbcore: registered new interface driver hub
[    0.260586] usbcore: registered new device driver usb
[    0.261904] media: Linux media interface: v0.10
[    0.262096] Linux video capture interface: v2.00
[    0.262350] pps_core: LinuxPPS API ver. 1 registered
[    0.262362] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262483] PTP clock support registered
[    0.262832] EDAC MC: Ver: 3.0.0
[    0.264039] Advanced Linux Sound Architecture Driver Initialized.
[    0.266769] DMA-API: preallocated 4096 debug entries
[    0.266783] DMA-API: debugging enabled by kernel config
[    0.266849] Switched to clocksource arm_global_timer
[    0.286687] NET: Registered protocol family 2
[    0.287389] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287446] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287531] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287577] TCP: reno registered
[    0.287593] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287623] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.287847] NET: Registered protocol family 1
[    0.288181] RPC: Registered named UNIX socket transport module.
[    0.288193] RPC: Registered udp transport module.
[    0.288202] RPC: Registered tcp transport module.
[    0.288210] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288222] PCI: CLS 0 bytes, default 64
[    0.288646] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290630] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292683] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.292867] msgmni has been set to 967
[    0.293621] io scheduler noop registered
[    0.293634] io scheduler deadline registered
[    0.293675] io scheduler cfq registered (default)
[    0.307909] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.307929] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431147] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.998279] console [ttyPS0] enabled
[    1.002529] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.010155] [drm] Initialized drm 1.1.0 20060810
[    1.027238] brd: module loaded
[    1.036591] loop: module loaded
[    1.045981] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.051960] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.059826] libphy: XEMACPS mii bus: probed
[    1.064196] ------------- phy_id = 0x3625e62
[    1.069138] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.077754] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.084368] ehci-pci: EHCI PCI platform driver
[    1.091607] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.098426] usbcore: registered new interface driver usb-storage
[    1.105259] mousedev: PS/2 mouse device common for all mice
[    1.111385] i2c /dev entries driver
[    1.118309] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.123782] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.129700] Xilinx Zynq CpuIdle Driver started
[    1.134553] sdhci: Secure Digital Host Controller Interface driver
[    1.140733] sdhci: Copyright(c) Pierre Ossman
[    1.145007] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.151826] mmc0: no vqmmc regulator found
[    1.155842] mmc0: no vmmc regulator found
[    1.196869] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205571] usbcore: registered new interface driver usbhid
[    1.211085] usbhid: USB HID core driver
[    1.215779] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222080] nand: Micron MT29F2G08ABAEAWP
[    1.226046] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231983] Bad block table found at page 131008, version 0x01
[    1.238205] Bad block table found at page 130944, version 0x01
[    1.244253] 3 ofpart partitions found on MTD device pl353-nand
[    1.250037] Creating 3 MTD partitions on "pl353-nand":
[    1.255128] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263192] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270481] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281235] TCP: cubic registered
[    1.284471] NET: Registered protocol family 17
[    1.289175] Registering SWP/SWPB emulation handler
[    1.295041] regulator-dummy: disabling
[    1.299350] UBI: attaching mtd1 to ubi0
[    1.824199] UBI: scanning is finished
[    1.835809] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842891] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849653] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856317] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863195] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869176] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876283] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.885326] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894541] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.894547] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898497] ALSA device list:
[    1.898501]   No soundcards found.
[    1.914831] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.944066] UBIFS: recovery needed
[    2.041463] UBIFS: recovery completed
[    2.045133] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.051078] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.060184] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.070073] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.075103] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.086139] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.093336] devtmpfs: mounted
[    2.096444] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.928981] random: dd urandom read with 1 bits of entropy available
[    3.306901] 
[    3.306901] bcm54xx_config_init
[    4.366866] 
[    4.366866] bcm54xx_config_init
[    8.367734] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.373822] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   26.117747] In axi fpga driver!
[   26.120819] request_mem_region OK!
[   26.124208] AXI fpga dev virtual address is 0xdf9fe000
[   26.129347] *base_vir_addr = 0xc51e
[   26.144008] In fpga mem driver!
[   26.147390] request_mem_region OK!
[   26.150899] fpga mem virtual address is 0xe2000000
[   26.936886] 
[   26.936886] bcm54xx_config_init
[   28.036877] 
[   28.036877] bcm54xx_config_init
[   32.037728] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   32.043751] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  343.842808] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f79000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d72000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 80026c8a7910481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000a0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0xff
main.c:2282: Check chain[7] PIC fw version=0xff
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
main.c:8961: chain[5]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[5] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[5] PIC fw version=0xff
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
main.c:8961: chain[7]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[7] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[7] PIC fw version=0xff
main.c:9183: get PIC voltage=255 on chain[5], value=790
main.c:9183: get PIC voltage=255 on chain[7], value=790
main.c:9349: chain[5] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9349: chain[7] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 2
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 2, total chain num = 2 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1891 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 80026c8a7910481c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0xff
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0xff
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 2
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=255 value=790
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=255 value=790
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:5119:set_frequency: max freq = 100
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=410 total_tv_end_sys=411
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = -100
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=0

first put the log in code format see what i did.

second try flashing the controller with bitmain firmware for s9 use link on bit main website to do it

than post the log

.
MΞTAWIN ^│ ^{THE FIRST WEB3 CASINO}

. ▄▄███████▄▄ ▄███████████████▄ ███▀██████▀░░░▀▄███ ████▄░░▀▀▀░░░░░░▄████ ████▄░░░░░░░░░░▄█████ █████▄▄░░░░░░░▄██████ ███▄▄░░░░▄▄▄███████ ▀███████████████▀ ▀▀███████▀▀ TWITTER

. ▄▄███████▄▄ ▄███████████████▄ ███████████▀▀▀░░███ ██████▀▀▀░░▄▄▀░░▐████ ███▄▄░░░▄█▀░░░░░█████ ██████▌▐▀░░░░░░▐█████ ██████▌░▄█▄▄░░█████ ▀███████████████▀ ▀▀███████▀▀ TELEGRAM

. ▄▄███████▄▄ ▄███████████████▄ ████▀▀░░▀▀▀░░▀▀████ ████▀░░░░░░░░░░░▀████ ███▌░░░██░░░██░░░▐███ ███▌░░░░░░░░░░░░░▐███ ███▄░▀█▄▄▄▄▄█▀░▄███ ▀███████████████▀ ▀▀███████▀▀ DISCORD

.
..^PLAY NOW..

BazeJass (OP)

Newbie

Offline

Activity: 7
Merit: 2

Re: S9 not hashing after changing control board

May 25, 2022, 03:10:11 PM

Noted, apologies, I am new and still learning stuffs.
Also, I tried flashing, then upgraded to the latest firmware of 2019 (final one on Bitmain website), still the same, no clue on what to do next.

BitMaxz

Legendary

Offline

Activity: 3472
Merit: 3200

Playbet.io - Crypto Casino and Sportsbook

Re: S9 not hashing after changing control board

May 25, 2022, 10:32:30 PM

Based on your logs it could be a PIC flash corrupted or fried PIC chip.

What I would like you to try is to run hashboard one by one you can follow this guide "Antminer test one by one"

Check the logs again and update here for changes.

The other thing that I noticed from your logs is that PCB temp has an abnormal status so there is a big possibility that your hashboard is overheating it could be short capacitors or dead sensor.

.... ..^Playbet.io.^│.^{Casino & Sportsbook}.....^Grab up to4 BTC^{+ 800 Free Spins}........

BazeJass (OP)

Newbie

Offline

Activity: 7
Merit: 2

Re: S9 not hashing after changing control board

May 26, 2022, 05:25:08 AM

Quote from: BitMaxz on May 25, 2022, 10:32:30 PM

I have tested all 3 dashboard one by one as suggested, please find the details below-

1) Hashboard 1 observation

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000288] ps7-ttc #0 at df804000, irq=43
[    0.000590] Console: colour dummy device 80x30
[    0.000619] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.100238] pid_max: default: 32768 minimum: 301
[    0.100450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100469] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102625] CPU: Testing write buffer coherency: ok
[    0.102937] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.102994] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.103215] L310 cache controller enabled
[    0.103235] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.180984] CPU1: Booted secondary processor
[    0.270216] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270345] Brought up 2 CPUs
[    0.270363] SMP: Total of 2 processors activated.
[    0.270371] CPU: All CPU(s) started in SVC mode.
[    0.271029] devtmpfs: initialized
[    0.273450] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.274638] regulator-dummy: no parameters
[    0.281984] NET: Registered protocol family 16
[    0.284193] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.286456] cpuidle: using governor ladder
[    0.286469] cpuidle: using governor menu
[    0.293809] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.295325] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.295338] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.295449] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.317252] bio: create slab <bio-0> at 0
[    0.318624] vgaarb: loaded
[    0.319322] SCSI subsystem initialized
[    0.320238] usbcore: registered new interface driver usbfs
[    0.320891] usbcore: registered new interface driver hub
[    0.321176] usbcore: registered new device driver usb
[    0.321694] media: Linux media interface: v0.10
[    0.321856] Linux video capture interface: v2.00
[    0.322095] pps_core: LinuxPPS API ver. 1 registered
[    0.322107] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.322227] PTP clock support registered
[    0.322587] EDAC MC: Ver: 3.0.0
[    0.323777] Advanced Linux Sound Architecture Driver Initialized.
[    0.326502] DMA-API: preallocated 4096 debug entries
[    0.326516] DMA-API: debugging enabled by kernel config
[    0.326583] Switched to clocksource arm_global_timer
[    0.346534] NET: Registered protocol family 2
[    0.347481] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.347538] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.347622] TCP: Hash tables configured (established 4096 bind 4096)
[    0.347666] TCP: reno registered
[    0.347682] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.347712] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.347951] NET: Registered protocol family 1
[    0.348299] RPC: Registered named UNIX socket transport module.
[    0.348312] RPC: Registered udp transport module.
[    0.348320] RPC: Registered tcp transport module.
[    0.348329] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.348341] PCI: CLS 0 bytes, default 64
[    0.348763] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.350751] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.352792] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.352981] msgmni has been set to 967
[    0.353740] io scheduler noop registered
[    0.353753] io scheduler deadline registered
[    0.353794] io scheduler cfq registered (default)
[    0.365083] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.365103] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.488516] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.055248] console [ttyPS0] enabled
[    1.059480] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.067110] [drm] Initialized drm 1.1.0 20060810
[    1.083994] brd: module loaded
[    1.093395] loop: module loaded
[    1.102834] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.108785] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.116521] libphy: XEMACPS mii bus: probed
[    1.121106] ------------- phy_id = 0x3625e62
[    1.125815] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.134428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.141091] ehci-pci: EHCI PCI platform driver
[    1.148350] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.155140] usbcore: registered new interface driver usb-storage
[    1.162003] mousedev: PS/2 mouse device common for all mice
[    1.168152] i2c /dev entries driver
[    1.175012] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.180528] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.186398] Xilinx Zynq CpuIdle Driver started
[    1.191289] sdhci: Secure Digital Host Controller Interface driver
[    1.197410] sdhci: Copyright(c) Pierre Ossman
[    1.201725] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.208612] mmc0: no vqmmc regulator found
[    1.212622] mmc0: no vmmc regulator found
[    1.256624] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.265307] usbcore: registered new interface driver usbhid
[    1.270817] usbhid: USB HID core driver
[    1.275505] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.281798] nand: Micron MT29F2G08ABAEAWP
[    1.285767] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.291706] Bad block table found at page 131008, version 0x01
[    1.297932] Bad block table found at page 130944, version 0x01
[    1.303989] 3 ofpart partitions found on MTD device pl353-nand
[    1.309763] Creating 3 MTD partitions on "pl353-nand":
[    1.314866] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.322902] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.330210] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.340910] TCP: cubic registered
[    1.344150] NET: Registered protocol family 17
[    1.348876] Registering SWP/SWPB emulation handler
[    1.354758] regulator-dummy: disabling
[    1.359085] UBI: attaching mtd1 to ubi0
[    1.883881] UBI: scanning is finished
[    1.895536] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.902611] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.909374] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.916039] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.922916] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.928897] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.936004] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.945047] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.954263] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.954268] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.958218] ALSA device list:
[    1.958221]   No soundcards found.
[    1.974551] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.003492] UBIFS: recovery needed
[    2.114884] UBIFS: recovery completed
[    2.118568] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.124488] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.133620] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.143506] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.148552] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.159813] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.167012] devtmpfs: mounted
[    2.170120] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    3.013142] random: dd urandom read with 1 bits of entropy available
[    3.396628] 
[    3.396628] bcm54xx_config_init
[    4.466636] 
[    4.466636] bcm54xx_config_init
[    8.467466] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.473559] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   26.186100] In axi fpga driver!
[   26.189199] request_mem_region OK!
[   26.192559] AXI fpga dev virtual address is 0xdf9fe000
[   26.197696] *base_vir_addr = 0xc51e
[   26.212166] In fpga mem driver!
[   26.215497] request_mem_region OK!
[   26.219128] fpga mem virtual address is 0xe2000000
[   27.006616] 
[   27.006616] bcm54xx_config_init
[   28.116605] 
[   28.116605] bcm54xx_config_init
[   32.117556] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   32.123577] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  339.929697] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f25000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d1e000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 80026c8a7910481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x00000020
driver-bitmain.c:1946: Find hashboard on Chain[5]
main.c:2282: Check chain[5] PIC fw version=0xff
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
main.c:8961: chain[5]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[5] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[5] PIC fw version=0xff
main.c:9183: get PIC voltage=255 on chain[5], value=790
main.c:9349: chain[5] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 1
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 1, total chain num = 1 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:14741:  calling the get rate, writing rate:3500
main.c:13927: bmminer not found= 1846 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 80026c8a7910481c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[5]
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[5]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[5]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0xff
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 1
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=255 value=790
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:5119:set_frequency: max freq = 100
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=238 total_tv_end_sys=239
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = -100
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 0.000000, ideal hash rate = 0
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 9, dev->chain_asic_num[i] = 0
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=0


FAN RMP FALLS DOWN THEN AFTER SOMETIME PICKS UP - THE LOGS ABOVE ARE AFTER THE FAN RPM GOES BACK UP AGAIN.
THE FAN RPM CYCLE GOES ON.
MINER STATUS SHOWS NO HASHING AT ALL, POOL IS ALIVE, FAN5 AT 3000 AND FAN6 AT 1680

Posting remaining logs in the post below.

BazeJass (OP)

Newbie

Offline

Activity: 7
Merit: 2

Re: S9 not hashing after changing control board

May 26, 2022, 10:19:36 AM

2) Hashboard 2 observation

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000293] ps7-ttc #0 at df804000, irq=43
[    0.000593] Console: colour dummy device 80x30
[    0.000622] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.100241] pid_max: default: 32768 minimum: 301
[    0.100447] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102627] CPU: Testing write buffer coherency: ok
[    0.102938] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.102996] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.103218] L310 cache controller enabled
[    0.103237] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.180984] CPU1: Booted secondary processor
[    0.270218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270349] Brought up 2 CPUs
[    0.270367] SMP: Total of 2 processors activated.
[    0.270375] CPU: All CPU(s) started in SVC mode.
[    0.271030] devtmpfs: initialized
[    0.273455] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.274643] regulator-dummy: no parameters
[    0.281993] NET: Registered protocol family 16
[    0.284209] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.286471] cpuidle: using governor ladder
[    0.286484] cpuidle: using governor menu
[    0.293837] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.295351] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.295364] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.295475] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.317074] bio: create slab <bio-0> at 0
[    0.318460] vgaarb: loaded
[    0.319156] SCSI subsystem initialized
[    0.320033] usbcore: registered new interface driver usbfs
[    0.320233] usbcore: registered new interface driver hub
[    0.320456] usbcore: registered new device driver usb
[    0.320979] media: Linux media interface: v0.10
[    0.321268] Linux video capture interface: v2.00
[    0.321516] pps_core: LinuxPPS API ver. 1 registered
[    0.321528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.321658] PTP clock support registered
[    0.322014] EDAC MC: Ver: 3.0.0
[    0.323207] Advanced Linux Sound Architecture Driver Initialized.
[    0.325936] DMA-API: preallocated 4096 debug entries
[    0.325949] DMA-API: debugging enabled by kernel config
[    0.326018] Switched to clocksource arm_global_timer
[    0.346920] NET: Registered protocol family 2
[    0.347575] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.347632] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.347717] TCP: Hash tables configured (established 4096 bind 4096)
[    0.347758] TCP: reno registered
[    0.347774] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.347805] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.348037] NET: Registered protocol family 1
[    0.348365] RPC: Registered named UNIX socket transport module.
[    0.348378] RPC: Registered udp transport module.
[    0.348387] RPC: Registered tcp transport module.
[    0.348395] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.348407] PCI: CLS 0 bytes, default 64
[    0.348836] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.350811] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.352882] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.353080] msgmni has been set to 967
[    0.353835] io scheduler noop registered
[    0.353849] io scheduler deadline registered
[    0.353886] io scheduler cfq registered (default)
[    0.366489] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.366508] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.490206] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.057877] console [ttyPS0] enabled
[    1.062136] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.069751] [drm] Initialized drm 1.1.0 20060810
[    1.086732] brd: module loaded
[    1.096125] loop: module loaded
[    1.105476] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.111293] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.119201] libphy: XEMACPS mii bus: probed
[    1.123569] ------------- phy_id = 0x3625e62
[    1.128599] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.137403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.144017] ehci-pci: EHCI PCI platform driver
[    1.151262] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.158096] usbcore: registered new interface driver usb-storage
[    1.164926] mousedev: PS/2 mouse device common for all mice
[    1.171043] i2c /dev entries driver
[    1.178034] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.183512] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.189437] Xilinx Zynq CpuIdle Driver started
[    1.194282] sdhci: Secure Digital Host Controller Interface driver
[    1.200424] sdhci: Copyright(c) Pierre Ossman
[    1.204717] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.211526] mmc0: no vqmmc regulator found
[    1.215536] mmc0: no vmmc regulator found
[    1.256038] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.264723] usbcore: registered new interface driver usbhid
[    1.270230] usbhid: USB HID core driver
[    1.274923] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.281216] nand: Micron MT29F2G08ABAEAWP
[    1.285184] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.291128] Bad block table found at page 131008, version 0x01
[    1.297348] Bad block table found at page 130944, version 0x01
[    1.303405] 3 ofpart partitions found on MTD device pl353-nand
[    1.309186] Creating 3 MTD partitions on "pl353-nand":
[    1.314278] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.322322] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.329631] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.340363] TCP: cubic registered
[    1.343601] NET: Registered protocol family 17
[    1.348289] Registering SWP/SWPB emulation handler
[    1.354158] regulator-dummy: disabling
[    1.358482] UBI: attaching mtd1 to ubi0
[    1.883316] UBI: scanning is finished
[    1.894926] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.902012] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.908773] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.915438] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.922316] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.928297] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.935403] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.944446] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.953662] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.953668] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.957605] ALSA device list:
[    1.957609]   No soundcards found.
[    1.973967] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.002878] UBIFS: recovery needed
[    2.094648] UBIFS: recovery completed
[    2.098338] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.104259] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.113392] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.123277] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.128317] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.139586] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.146754] devtmpfs: mounted
[    2.149857] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.988302] random: dd urandom read with 1 bits of entropy available
[    3.376064] 
[    3.376064] bcm54xx_config_init
[    4.436040] 
[    4.436040] bcm54xx_config_init
[    8.436891] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.442975] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   24.004983] In axi fpga driver!
[   24.008083] request_mem_region OK!
[   24.011446] AXI fpga dev virtual address is 0xdf9fe000
[   24.016568] *base_vir_addr = 0xc51e
[   24.031218] In fpga mem driver!
[   24.034643] request_mem_region OK!
[   24.038276] fpga mem virtual address is 0xe2000000
[   24.826057] 
[   24.826057] bcm54xx_config_init
[   25.916055] 
[   25.916055] bcm54xx_config_init
[   29.916896] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   29.922931] xemacps e000b000.ps7-ethernet: link up (100/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fa2000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d9b000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 80026c8a7910481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x00000040
driver-bitmain.c:1946: Find hashboard on Chain[6]
main.c:2282: Check chain[6] PIC fw version=0xff
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
main.c:8961: chain[6]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[6] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[6] PIC fw version=0xff
main.c:9183: get PIC voltage=255 on chain[6], value=790
main.c:9349: chain[6] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 1
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 1, total chain num = 1 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 2154 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 80026c8a7910481c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[6]
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[6]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[6]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0xff
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 1
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=255 value=790
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:5119:set_frequency: max freq = 100
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=236 total_tv_end_sys=237
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = -100
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 0.000000, ideal hash rate = 0
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 8, dev->chain_asic_num[i] = 0
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=0


SAME BEHAVIOR AS THE FIRST HASHBOARD, FAN RPM SLOWS DOWN AND THEN PICKS UP AGAIN AND THEN THE CYCLE REPEATS

3) Hashboard 3 observation

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000290] ps7-ttc #0 at df804000, irq=43
[    0.000592] Console: colour dummy device 80x30
[    0.000620] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090240] pid_max: default: 32768 minimum: 301
[    0.090446] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090465] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092621] CPU: Testing write buffer coherency: ok
[    0.092931] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.092987] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093208] L310 cache controller enabled
[    0.093227] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170985] CPU1: Booted secondary processor
[    0.260217] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260346] Brought up 2 CPUs
[    0.260365] SMP: Total of 2 processors activated.
[    0.260373] CPU: All CPU(s) started in SVC mode.
[    0.261030] devtmpfs: initialized
[    0.263457] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264646] regulator-dummy: no parameters
[    0.271989] NET: Registered protocol family 16
[    0.274211] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276472] cpuidle: using governor ladder
[    0.276485] cpuidle: using governor menu
[    0.283811] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285318] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285331] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285440] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307161] bio: create slab <bio-0> at 0
[    0.308558] vgaarb: loaded
[    0.309262] SCSI subsystem initialized
[    0.310133] usbcore: registered new interface driver usbfs
[    0.310441] usbcore: registered new interface driver hub
[    0.310665] usbcore: registered new device driver usb
[    0.311207] media: Linux media interface: v0.10
[    0.311363] Linux video capture interface: v2.00
[    0.311600] pps_core: LinuxPPS API ver. 1 registered
[    0.311611] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311734] PTP clock support registered
[    0.312079] EDAC MC: Ver: 3.0.0
[    0.313295] Advanced Linux Sound Architecture Driver Initialized.
[    0.316041] DMA-API: preallocated 4096 debug entries
[    0.316054] DMA-API: debugging enabled by kernel config
[    0.316124] Switched to clocksource arm_global_timer
[    0.336394] NET: Registered protocol family 2
[    0.337519] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.337577] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.337662] TCP: Hash tables configured (established 4096 bind 4096)
[    0.337706] TCP: reno registered
[    0.337722] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.337758] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.338002] NET: Registered protocol family 1
[    0.338320] RPC: Registered named UNIX socket transport module.
[    0.338332] RPC: Registered udp transport module.
[    0.338341] RPC: Registered tcp transport module.
[    0.338349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338361] PCI: CLS 0 bytes, default 64
[    0.338785] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340762] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342833] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343021] msgmni has been set to 967
[    0.343780] io scheduler noop registered
[    0.343792] io scheduler deadline registered
[    0.343829] io scheduler cfq registered (default)
[    0.354583] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.354603] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.477545] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.044564] console [ttyPS0] enabled
[    1.048809] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.056441] [drm] Initialized drm 1.1.0 20060810
[    1.073369] brd: module loaded
[    1.082739] loop: module loaded
[    1.092242] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.098205] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.105940] libphy: XEMACPS mii bus: probed
[    1.110520] ------------- phy_id = 0x3625e62
[    1.115250] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.123999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.130695] ehci-pci: EHCI PCI platform driver
[    1.137922] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.144712] usbcore: registered new interface driver usb-storage
[    1.151599] mousedev: PS/2 mouse device common for all mice
[    1.157779] i2c /dev entries driver
[    1.164656] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.170181] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.176050] Xilinx Zynq CpuIdle Driver started
[    1.180916] sdhci: Secure Digital Host Controller Interface driver
[    1.187054] sdhci: Copyright(c) Pierre Ossman
[    1.191353] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.198172] mmc0: no vqmmc regulator found
[    1.202188] mmc0: no vmmc regulator found
[    1.246166] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254847] usbcore: registered new interface driver usbhid
[    1.260365] usbhid: USB HID core driver
[    1.265064] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271355] nand: Micron MT29F2G08ABAEAWP
[    1.275326] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281274] Bad block table found at page 131008, version 0x01
[    1.287521] Bad block table found at page 130944, version 0x01
[    1.293568] 3 ofpart partitions found on MTD device pl353-nand
[    1.299341] Creating 3 MTD partitions on "pl353-nand":
[    1.304442] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312476] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319797] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.330530] TCP: cubic registered
[    1.333768] NET: Registered protocol family 17
[    1.338482] Registering SWP/SWPB emulation handler
[    1.344345] regulator-dummy: disabling
[    1.348718] UBI: attaching mtd1 to ubi0
[    1.873531] UBI: scanning is finished
[    1.885138] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.892213] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.898976] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.905640] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.912518] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.918499] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.925605] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.934649] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.943864] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.943870] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.947808] ALSA device list:
[    1.947811]   No soundcards found.
[    1.964157] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.993080] UBIFS: recovery needed
[    2.070198] UBIFS: recovery completed
[    2.073867] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.079811] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.088918] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.098807] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.103837] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.115116] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.122307] devtmpfs: mounted
[    2.125413] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.957762] random: dd urandom read with 1 bits of entropy available
[    3.336141] 
[    3.336141] bcm54xx_config_init
[    4.406185] 
[    4.406185] bcm54xx_config_init
[    8.407003] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.413093] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.906845] In axi fpga driver!
[   23.909912] request_mem_region OK!
[   23.913302] AXI fpga dev virtual address is 0xdf9fe000
[   23.918441] *base_vir_addr = 0xc51e
[   23.932882] In fpga mem driver!
[   23.936296] request_mem_region OK!
[   23.939801] fpga mem virtual address is 0xe2000000
[   24.736142] 
[   24.736142] bcm54xx_config_init
[   25.826160] 
[   25.826160] bcm54xx_config_init
[   29.827015] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   29.833034] xemacps e000b000.ps7-ethernet: link up (100/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fc4000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5dbd000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 80026c8a7910481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x00000080
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[7] PIC fw version=0xff
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
main.c:8961: chain[7]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9148: chain[7] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[7] PIC fw version=0xff
main.c:9183: get PIC voltage=255 on chain[7], value=790
main.c:9349: chain[7] temp offset record: -1,-1,-1,-1,-1,-1,-1,-1
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 1
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 1, total chain num = 1 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1982 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 80026c8a7910481c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=e8(ff) on Chain[7]
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=a0(ff) on Chain[7]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(ff) addr_L=80(ff) on Chain[7]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0xff
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 1
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=255 value=790
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:5119:set_frequency: max freq = 100
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=236 total_tv_end_sys=237
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = -100
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 0.000000, ideal hash rate = 0
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 8, dev->chain_asic_num[i] = 0
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=0

SAME BEHAVIOR OBSERVED AS PREVIOUS HASHBOARDS, FAN RPM CYCLE REPEATS.

What is my next set of actions based on the logs? please guide.

BitMaxz

Legendary

Offline

Activity: 3472
Merit: 3200

Playbet.io - Crypto Casino and Sportsbook

Re: S9 not hashing after changing control board

May 26, 2022, 10:57:42 PM

Try to flash your miner with SD card and lets hope that its just a software issue.
You can follow this guide below

- https://support.bitmain.com/hc/en-us/articles/360019493654-S9-series-S9-S9i-S9j-S9-Hydro-Control-Board-Program-Recovery

Then upgrade your unit with autotune firmware from bitmain.

If the issue the same then I suggest boot your miner with Braiins OS you can check their thread from this link below.
It can bypass the temp issue or ignore that error.
- https://bitcointalk.org/index.php?topic=5036844.0

.... ..^Playbet.io.^│.^{Casino & Sportsbook}.....^Grab up to4 BTC^{+ 800 Free Spins}........

BazeJass (OP)

Newbie

Offline

Activity: 7
Merit: 2

Re: S9 not hashing after changing control board

May 27, 2022, 02:55:59 PM

Quote from: BitMaxz on May 26, 2022, 10:57:42 PM

Noted, thanks a ton. As I have already flashed the miner using SD card and then upgraded to latest firmware (got the files directly from Bitmain customer support), here's what I think is the next step I am going to do.
1) Try new PSU.
2) Use Braiins OS next.

I will post my findings soon on the above 2 items.

BitMaxz

Legendary

Offline

Activity: 3472
Merit: 3200

Playbet.io - Crypto Casino and Sportsbook

Re: S9 not hashing after changing control board

May 27, 2022, 10:48:38 PM

Merited by mikeywith (4)

Quote from: BazeJass on May 27, 2022, 02:55:59 PM

I suggest you start on flashing or boot it with Braiins OS before you try PSU but there is a big possibility that the replacement control board could defective.

Do you have any extra miners for testing it would be easy to troubleshoot if you have an extra s9 miner?

Or check the test points of your hashboards to make sure your hashboards are fine you can follow this guide below to troubleshoot the hashboards

- https://www.zeusbtc.com/manuals/Antminer-S9-Hash-Board-Repair-Guide.asp

.... ..^Playbet.io.^│.^{Casino & Sportsbook}.....^Grab up to4 BTC^{+ 800 Free Spins}........

BazeJass (OP)

Newbie

Offline

Activity: 7
Merit: 2

Re: S9 not hashing after changing control board

May 28, 2022, 04:14:59 PM

#10

Quote from: BitMaxz on May 27, 2022, 10:48:38 PM

Quote from: BazeJass on May 27, 2022, 02:55:59 PM

Thank you for suggestions, I have booted Braiin OS on the S9 and received rather familiar error "Hashchain refused to start: Power: PIC should be at address PicAddress(0xf80,) but it's at address PicAddress( 0xffff,"

I was suggested by Braiins community to add the hex file to the PIC on hashboard. I do not have another S9, this is my first miner

BitMaxz

Legendary

Offline

Activity: 3472
Merit: 3200

Playbet.io - Crypto Casino and Sportsbook

Re: S9 not hashing after changing control board

May 28, 2022, 10:43:16 PM

Merited by mikeywith (2)

#11

Quote from: BazeJass on May 28, 2022, 04:14:59 PM

I have booted Braiin OS on the S9 and received rather familiar error "Hashchain refused to start: Power: PIC should be at address PicAddress(0xf80,) but it's at address PicAddress( 0xffff,"

I was suggested by Braiins community to add the hex file to the PIC on hashboard. I do not have another S9, this is my first miner

It seems you have hashboard with a broken/corrupted hex you will need a tool like Pickit3 to reflash it with a working hex file. If you don't have a working extra miner you can check the source below it also has a guide on how you can flash it with MPLab and it includes a working hex file.

- https://asicseer.com/page/restoring-hashboards

.... ..^Playbet.io.^│.^{Casino & Sportsbook}.....^Grab up to4 BTC^{+ 800 Free Spins}........

mikeywith

Legendary

Offline

Activity: 2450
Merit: 6651

be constructive or S.T.F.U

Re: S9 not hashing after changing control board

May 28, 2022, 11:52:19 PM

Merited by hugeblack (4)

#12

Before starting with the hex writing process, here is a simple fix that usually works with such errors.

1- unplug all hash boards from the control board
2- flash this firmware > https://file12.bitmain.com/shop-product/firmware/Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz

when the flash is down, power the miner off, re-plug the hash boards, and power on.

if that version does not work try this version > https://file12.bitmain.com/shop-product/firmware/Antminer-S9-all-201705031918-550M-user-Update2UBI-NF.tar.gz

if that version does not work too, try this custom firmware > https://www.awesomeminer.com/download/firmware/antminer-firmware/Antminer-S9-awesome-3.9.tar.gz

█▀▀▀
█
█
█
█
█
█
█
█
█
█
█
█▄▄▄

▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄

▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄

▀▀▀█
█
█
█
█
█
█
█
█
█
█
█
▄▄▄█

▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
░▀▀██▀▀

BazeJass (OP)

Newbie

Offline

Activity: 7
Merit: 2

Re: S9 not hashing after changing control board

June 05, 2022, 02:28:08 PM

Merited by mikeywith (2)

#13

Quote from: mikeywith on May 28, 2022, 11:52:19 PM

Thank you for suggesting it.

It took some time, tried all but only Awesomeminer firmware installed properly, however, even that didn't work, gonna contact the person from whom I bought the S9.

BitMaxz

Legendary

Offline

Activity: 3472
Merit: 3200

Playbet.io - Crypto Casino and Sportsbook

Re: S9 not hashing after changing control board

June 11, 2022, 11:42:32 PM

#14

Quote from: BazeJass on June 05, 2022, 02:28:08 PM

Thank you for suggesting it.

It took some time, tried all but only Awesomeminer firmware installed properly, however, even that didn't work, gonna contact the person from whom I bought the S9.

If you are trying to flash the Bitmain firmware while your current miner program is still awesomeminer you will only get the error while flashing it through WebGUI/Browser.

You need to flash it first to stock firmware with SD Card before you flash it again with different firmware to make them work. The guide is already on my first post.
You can also try asic.to firmware let's see if can help to troubleshoot the issue.

.... ..^Playbet.io.^│.^{Casino & Sportsbook}.....^Grab up to4 BTC^{+ 800 Free Spins}........

Pages: [1]

Bitcoin Forum > Bitcoin > Mining > Mining support > S9 not hashing after changing control board

« previous topic next topic »