ViaBTC free accelerator

[Ruttoshi]

@Charles-Tim, do I need to register and login before I can make use of this transaction accelerator tools.
O clicked on the free submission after pasting my transaction id but it didn't work. Or maybe I needed to wait till the last 100 transaction has been confirmed ?
Can you please help ne to accelerate my transaction from your corner.
acb0ae8c96418b061ac723201e40c3aa0ca5f444bf387e82423c4a218466fae0

What till it is 11 pm. Do not wait a second immediately it is 11 pm and refresh the page and submit your txid. It will work. But do not worry, I will also help you from my end to submit the transaction. After I submit it, I will let you know on this thread. After it has been submitted, wait for ViaBTC to mine a block and your transaction would be confirmed.

Edit:

The txid has successfully been submitted:

Thanks...what a relieve now.
It is very easy and I must say we appreciate having someone like you in our local board.

[1714697411]

1714697411

[1714697411]

1714697411

[1714697411]

1714697411

[1714697411]

1714697411

[NewRanger]

The txid has successfully been submitted:

Hello Mr. Charles-Tim. I want to ask several questions with examples of cases like this. For example, now I use the Trust wallet and want to make a transaction from at least 2 outputs where the gas fee has been automatically locked by their system Trust  wallet and cannot be edited again, then I enter and after it says pending in the application for a few moments before the transaction is completed .

The question is, when do we send the TXID to the BTC Transaction Accelerator and whether after we paste the TXID we can change the fee figures which are already automatic or only to speed up transactions when the network is congested.

Thank You.

[Charles-Tim]

Hello Mr. Charles-Tim. I want to ask several questions with examples of cases like this. For example, now I use the Trust wallet and want to make a transaction from at least 2 outputs where the gas fee has been automatically locked by their system Trust  wallet and cannot be edited again, then I enter and after it says pending in the application for a few moments before the transaction is completed .

The question is, when do we send the TXID to the BTC Transaction Accelerator and whether after we paste the TXID we can change the fee figures which are already automatic or only to speed up transactions when the network is congested.

You can submit the txid on the accaelerator anytime after you make the transaction. But because of the recent mempool congestion, people are submitting the 100 transactions before some seconds now, you have to be very fast with it, immediately after 1 hour has passed.

If you want to use Trustwallet, make sure that the fee rate is high enough, like 20 sat/vbyte or more for native segwit. But it is better you use wallet that supports RBF in case the fee you pay is still lower you will be able to pump the fee.

Not that ViaBTC will change the fee for you, it is free if you use the free accelerator and not the paid one. If you use the paid one, which is not advisable and costly, the transaction fee is also not altered but the money paid would be taken by the mining pool which is ViaBTC.

If you have a friend that is a miner and pool operator, he can decide to include any transaction of his choice to a block, including yours. even if you do not pay any fee, or using SPV wallet to pay not more than 1 sat/vbyte fee.

There is nothing called gas fee in bitcoin transaction. It is called transaction fee, or just call it fee.

[Frankolala]

@Charles-Tim, i have tried in two consecutive hours now to add my transaction on viaBTC accelerator but it is saying that transaction limited. This is why I come to you for help so that you can help me add my transaction from your end. Here is my txid 23e7d7047b287f714d5dd5b2761febd2e5fd5e9065daff57aa83e7a5bfea257b
Thanks in advance.

[Charles-Tim]

@Charles-Tim, i have tried in two consecutive hours now to add my transaction on viaBTC accelerator but it is saying that transaction limited. This is why I come to you for help so that you can help me add my transaction from your end. Here is my txid 23e7d7047b287f714d5dd5b2761febd2e5fd5e9065daff57aa83e7a5bfea257b
Thanks in advance.

Because the mempool is very congested, people that want to use the free accelerator are too many every hour. But do not worry, once I have submitted it successfully, I will let you know here.

Also know that the transaction will be confirmed after ViaBTC mine their next block. It can take some minutes or up to 3 hours.

Edit:
The transaction has been submitted. You can see it written in orange.



I was late and unable to screenshot it when it was submitted, but it was successful submitted by me.

[Samlucky O]

@Charles-Tim, i have tried in two consecutive hours now to add my transaction on viaBTC accelerator but it is saying that transaction limited. This is why I come to you for help so that you can help me add my transaction from your end. Here is my txid 23e7d7047b287f714d5dd5b2761febd2e5fd5e9065daff57aa83e7a5bfea257b
Thanks in advance.

I am also finding it difficult to accelerate my transaction since yesterday. Although checking from your comments on different occasions here, you are saying repeatedly that for accelerator to work, that the transaction should be within 19sat/vbyte or 10sat/ vbyte. But in my own case I imported my pass phrase from trust wallet to blue wallet and set my transaction at medium which is up to 40sat/vbyte which amount to about $3 and it's estimated to be 3 hours since then till now it's still under awiating confirmation. I have tried to accelerate it but saying  the same thing as that of @frankolala please help this is my trx id: 4ebde76d4ba4df94077199c8a6e00a6d72fedcf6bdda35312e8c8650bd71f659

[Charles-Tim]

I am also finding it difficult to accelerate my transaction since yesterday. Although checking from your comments on different occasions here, you are saying repeatedly that for accelerator to work, that the transaction should be within 19sat/vbyte or 10sat/ vbyte. But in my own case I imported my pass phrase from trust wallet to blue wallet and set my transaction at medium which is up to 40sat/vbyte which amount to about $3 and it's estimated to be 3 hours since then till now it's still under awiating confirmation. I have tried to accelerate it but saying  the same thing as that of @frankolala please help this is my trx id: 4ebde76d4ba4df94077199c8a6e00a6d72fedcf6bdda35312e8c8650bd71f659

For the accelerator to work:

1. The transaction must not have unconfirmed parent. I will also add this to OP.
2. The size must not be more than 500 bytes. Your transaction is 490 bytes
3. The fee should not be less than 10 bytes (around 19 bytes for native segwit). Your transaction is 20.245 sat/byte, which is 40.162 sat/vbyte

You transaction has 3 inputs and 1 output. If it is just 1 input or 1 output more, it would have been greater than 500 bytes. But luckily not greater.

The transaction can be accelerated.

Ones I submit it, I will let you know.

But the mempool is 41 sat/vbyte right now. Your transaction may likely be confirmed soon without using the accelerator.

Edit:
I have just checked the transaction again, as mempool dropped to 40 sat/byte just now as F2Pool mined the block ane your transaction is included. It is now confirmed without any accelerator. The fee used is enough.

[Samlucky O]

I am also finding it difficult to accelerate my transaction since yesterday. Although checking from your comments on different occasions here, you are saying repeatedly that for accelerator to work, that the transaction should be within 19sat/vbyte or 10sat/ vbyte. But in my own case I imported my pass phrase from trust wallet to blue wallet and set my transaction at medium which is up to 40sat/vbyte which amount to about $3 and it's estimated to be 3 hours since then till now it's still under awiating confirmation. I have tried to accelerate it but saying  the same thing as that of @frankolala please help this is my trx id: 4ebde76d4ba4df94077199c8a6e00a6d72fedcf6bdda35312e8c8650bd71f659

For the accelerator to work:

1. The transaction must not have unconfirmed parent. I will also add this to OP.
2. The size must not be more than 500 bytes. Your transaction is 490 bytes
3. The fee should not be less than 10 bytes (around 19 bytes for native segwit). Your transaction is 20.245 sat/byte, which is 40.162 sat/vbyte

You transaction has 3 inputs and 1 output. If it is just 1 input or 1 output more, it would have been greater than 500 bytes. But luckily not greater.

The transaction can be accelerated.

Ones I submit it, I will let you know.

But the mempool is 41 sat/vbyte right now. Your transaction may likely be confirmed soon without using the accelerator.

Edit:
I have just checked the transaction again, as mempool dropped to 40 sat/byte just now as F2Pool mined the block ane your transaction is included. It is now confirmed without any accelerator. The fee used is enough.

Thanks for your efforts in trying to help us out in difficult situations. Another question I will like to ask is that blue wallet and electron wallet which one is more faster in transaction? Which among them is also cheaper in transaction fee? Which among them is the best to use?

[Charles-Tim]

Another question I will like to ask is that blue wallet and electron wallet which one is more faster in transaction? Which among them is also cheaper in transaction fee? Which among them is the best to use?

I use both and I like both.

No wallet is fast because not wallet that determines how fast a transaction can be confirmed, miners include unconfirmed transactions into a block and be confirmed and that determines how fast the transaction is and also the mempool if congested or not. Miners include the transactions with higher fee into a block first and get confirmed.

[Doan9269]

Another question I will like to ask is that blue wallet and electron wallet which one is more faster in transaction? Which among them is also cheaper in transaction fee? Which among them is the best to use?

I use both and I like both.

No wallet is fast because not wallet that determines show fast a transaction can be confirmed, miners include unconfirmed transactions into a block and be confirmed and that determines how fast the transaction is and also the mempool if congested or not. Miners include the transactions with higher fee into a block first.

Wallets types are not the ones that determines how fast a transaction should go, the fee rate and how the mempool is less congested determine that, if you choose a lower priority, it will take longer than the other transactions that uses medium or higher priority for their transaction fee rate, but you can always boost up your transactions using a mining pool to accelerate it, provided you're using a non custodial wallet like electrum or blue wallet, electrum wallet is multisig wallet while blue wallet is not, you can also spend uncomfirmed transaction output from these two wallets than when you're using a custodial wallet.

[Charles-Tim]

you can always boost up your transactions using a mining pool to accelerate it, provided you're using a non custodial wallet like electrum or blue wallet

You can not use mining pool to accelerate your transaction, unless the mining pool is providing such service, like ViaBTC and Binance Pool.

Mempool.space (which is not a mining pool) has also started transaction acceleration service.

But among all, only ViaBTC has free accelerator.

provided you're using a non custodial wallet like electrum or blue wallet

If provided you follow the rules the accelerator service provider has.

electrum wallet is multisig wallet while blue wallet is not

Electrum give the option to setup either a single signature or multisig wallet. Also giving the option to setup 2FA wallet, which is a 2-of-3 or 2-of-2 multisig wallet.

Bluewallet also is a single signature wallet, but you can access 2-of-3 multisig wallet using the vault on Bluewallet.

you can also spend uncomfirmed transaction output from these two wallets than when you're using a custodial wallet.

I have not noticed this on Bluewallet before. Have you used this feature on Bluewallet? I think it is not possible to spend unconfirmed coins on Bluewallet.

[Biancamason940]

Hey I really need your assistance if you don't mind, let me explain:

My Bitcoin has been stuck in pending for 3+ weeks. Cash app rejected my Bitcoin deposit for no reason and then when I reversed it into my coinbase it got stuck on the blockchain. CashApp sent it with a very very low fee which I had no say so over and they won't do anything to help me.

I don't have enough money to pay the fees on viabtc... the only money I have is the BTC that's pending I need it really bad please help me...

95fbf6da860e75ff47a1096583771001e3498702a818b72d4a25024d07ca5181

[Findingnemo]

I don't have enough money to pay the fees on viabtc... the only money I have is the BTC that's pending I need it really bad please help me...

95fbf6da860e75ff47a1096583771001e3498702a818b72d4a25024d07ca5181

But your transaction is not eligible to be accelerated via viabtc free quota since it doesn't meet this criterion of "The fee should not be less than 10 bytes (around 19 bytes for native segwit)".

Also, the cash app seems to be rebroadcasting your TX with the same fees which explains why nodes didn't drop your TX even after three weeks.

Anyway, let's hope the congestion will be cleared and your TX will be processed.

[Gormicsta]

Although I don't know much about Bitcoin transactions tech but I am pretty sure that the mempool is currently facing lots of transaction congestion due to the high rate of requested transaction caused by the use of the Bitcoin Blockchain to verify transaction of some coins that are value pump like the pepe and meme coins that happened few months back and please correct if wrong. So the essence of this tool will be to either faster your transaction to be seen by miners in the Blockchain or what? Because I know that what really determine your transaction being confirmed quickly is the actual fee attached to it.  So sir I would like to know more if you don't mind explaining a little as I believe no knowledge is a waste especially when it has to do with such good information been passed.

You got it right until the PEPE part. Bitcoin is unrelated to the PEPE token — one is Bitcoin (no better term, really) and the other one is an outright shitcoin. This isn't the first time Bitcoin's mempool has had bottlenecks. It often happens in periods where network activity is on the high side which is why scalability for Bitcoin has been one of the most popular discussions we've had in the Bitcoin community.

You can the give the Transaction pools section of the Bitcoin Book a read. You don't have to read all chapters to understand. 

I think all these tx fees saga came up as a result of the introduction and existence of this shitty ORDINAL TOKEN. The token is taking up more than enough space on the Blockchain, contributing t he overall demand for transaction space thereby making the tx fees to automatically go up.

[Coyster]

Anyway, let's hope the congestion will be cleared and your TX will be processed.

That transaction was made with just 7 sat/Vbyte and the fee rate in the mempool right now is above 50 sat/Vbyte, goodluck to @Biancamason940 in waiting for the congestion to clear, because i am pretty certain that it'd take a long time for it to drop to the level of 7 sat/Vbyte.

Cash app rejected my Bitcoin deposit for no reason and then when I reversed it into my coinbase it got stuck on the blockchain. CashApp sent it with a very very low fee which I had no say so over and they won't do anything to help me.

Coinbase is an exchange, if your coins were sent to your non-custodial wallet, you'd have done CPFP, but you cannot do that in this situation, you only option is to contact the sender and ask them to use RBF to push the stuck transaction.

[Agbe]

This accelerator e dey good well well but to meet up the time nai be di wahala. And one thing I also understand be say if you use low fee, the accelerator will not go because when I tried my own for like for hours and e no work and later I come discovered say na di tx wey been dey low nai make and as I increase di fee omen na so dem just confirmed am immediately, though the tx fee was very high. So I come to discover say if the fee e dey high miners go confirmed am very fast.

[Charles-Tim]

What I noticed recently about ViaBTC accelerator:

The free submission is no more congested (you know what I am talking about). I mean the 100 transaction per hour which takes less than 10 seconds to have been used up, it is no more like that.

Your transaction may not get confirmed after ViaBTC mine the next block. It will take longer time but your transaction will still later be confirmed.

[Ruttoshi]

What I noticed recently about ViaBTC accelerator:

The free submission is no more congested (you know what I am talking about). I mean the 100 transaction per hour which takes less than 10 seconds to have been used up, it is no more like that.

Your transaction may not get confirmed after ViaBTC mine the next block. It will take longer time but your transaction will still later be confirmed.

You are right, I used it today and I was thinking that it will be the normal 0'clock timing, so I made a transaction at 10:50am and was waiting till 11 0'clock and immediately, i refreshed my network but my network provided couldn't refresh it die to bad network and I became worried.

To my greatest surprise at 11:03am was when the page refreshed and I was angry but still persist on trying, the moment that I paste my transaction and submit, instantly it went and I was very happy for trying. I believe that latest 6hrs one transaction should be confirmed. One just need to be patient, since the tx fee is still high.

[nelson4lov]

What I noticed recently about ViaBTC accelerator:

The free submission is no more congested (you know what I am talking about). I mean the 100 transaction per hour which takes less than 10 seconds to have been used up, it is no more like that.

Your transaction may not get confirmed after ViaBTC mine the next block. It will take longer time but your transaction will still later be confirmed.

It looks like it is back to business as usual. I've been trying to track when the service will available on an hourly basis even at midnight hours but it gets snagged by other users within split seconds. I think this will continue as long as the current demand for faster transactions is on the high side.

~Snipped

I think all these tx fees saga came up as a result of the introduction and existence of this shitty ORDINAL TOKEN. The token is taking up more than enough space on the Blockchain, contributing t he overall demand for transaction space thereby making the tx fees to automatically go up.

Yes, the demand for ORDINALs is on the rise because Bitcoin is in demand as well. This will become a norm as we continue to have more tokens go live on ORDINALs. This is why we can't have compute on Bitcoin (yet).

[Charles-Tim]

It looks like it is back to business as usual. I've been trying to track when the service will available on an hourly basis even at midnight hours but it gets snagged by other users within split seconds. I think this will continue as long as the current demand for faster transactions is on the high side.

Yes, I noticed this yesterday, that is has been back to as usual with people submitting 100 transactions within 5 seconds. But it is still working. I wanted to help someone to submit his txid like 5 hours ago but the txid was not valid, likely he increased the fee or probably it's a transaction that has been dropped from most nodes mempool. The transaction would have been submitted successfully.