Lottery Solo Pool Miner Race on ckpool

[willi9974]

ck found the problem and he fixed some things and migrate to the new hardware.
All information you can see here in the cksolo pool topic.

https://bitcointalk.org/index.php?topic=5237323.0

[little_worker]

Hi Willi

Can we use eusolo.ckpool.org for EU right now? Because after switching I don't see miner in the statistic solorun.lima.zone.
So, it's only statistic question or it can affects team efforts and better wait a little bit?
And, if we can use eusolo.ckpool.org, whenever you get a chance, can you please update first post with this info, it can be helpful, because ping to eusolo.ckpool.org almost three time less then to solo.ckpool.org for EU miners, what is important for solo mining

Regards,

[willi9974]

Hi,

I had the same question and ask ck as pooloperator and got a answer

https://bitcointalk.org/index.php?topic=5237323.msg64790230#msg64790230

Change to EU-Pool not possible, they are complete separated pools and my statistic works only with the old Pool settings.

[fanomars]

Cheers willi9974,
Username: fanomars
Canaan Avalon Nano 3 with about 4.1 TH/S
Rx BTC at: bc1qh4fls9sx6dear7cwweehmwaa9g2m45vygxxcpm
Many thanks! 

[izo120]

Hi Willi!

I've got another miner, so for now its:

izo120_1 (was izo120)
Device type: Lucky Miner lv06
Normal speed: 500gh/s

izo120_2
Device type: Lucky Miner lv07
Normal speed: 1T/s

Wallet: bc1q689p7lengkp54ffdldtv0p6j9zkhwqal5e3dza

Hi everyone!

I’m in!

Username: izo120
Device type: Lucky Miner lv06
Normal speed: 500gh/s
Wallet: bc1q689p7lengkp54ffdldtv0p6j9zkhwqal5e3dza

[willi9974]

have update some devices.

open devices are ....

satcat21_5
satcat21_4
-jf_lv05-v3-1
-jf_lv05-v3-2
Buchi-88_1


Can you share what for a device you have?

sorry, maybe i have missed some postings.

best regards,
Willi

[fanomars]

Cheers willi9974,

Username: fanomars

    worker: fanomars_nano3blue1   << I should have added this :-)
                Avalon Nano 3 with about 4.1 TH/S

Rx BTC at: bc1qh4fls9sx6dear7cwweehmwaa9g2m45vygxxcpm

Many thanks!
fanomars

[Defreezello]

Hi!!!=)


Username: Defreezello
Device type: Lucky Miner lv06
Normal speed: average 500gh/s

wallet: bc1qxg7um2sh3q4jrtxq7zc82l6slahsnaq0c4u4c5

[willi9974]

thanks for the info and i add the new miner.
welcome to our little project.

actual status (2.3 PHs with a rental)

Hashrate all worker: 2.398.005G
All shares (including inactive miner / BTC Diff): 1.568.935.150.098 / 103.919.634.711.490
Our luck if we find now a block (luck = (100-(shares / diff)*100)): 98,49024%
Number of worker with active hashrate >= 200G in 5m: 210
Number of worker for payout with hashrate >= 200G in 5m and 7d: 209

Best regards and happy mining,
Willi

[oeapq]

Hey friends, happy to join the project, great idea!

Username: oeapq_1
Device: Lucky Miner LVL 07 at 1 TH/S

BTC_Address: bc1q7mgzxhw6ctje05aknrkryp05vuz6zx0ajn5w0v

[willi9974]

Have update all the new miner up to here and here are our new status after the update

Hashrate all worker: 617.917G
All shares (including inactive miner / BTC Diff): 1.658.272.204.002 / 103.919.634.711.490
Our luck if we find now a block (luck = (100-(shares / diff)*100)): 98,40427%
Number of worker with active hashrate >= 200G in 5m: 220
Number of worker for payout with hashrate >= 200G in 5m and 7d: 217

https://solorun.lima.zone/devices.php

Code:

Worker Summary by Device Type
Device Type Worker Count Hashrate (5m) Sum Hashrate (7d) Sum
Bitaxe ULTRA BM1366 58 25.937G 24.661G
Lucky Miner LV06 BM1366 43 126.503G 40.293G
Avalon Nano 3 40 106.775G 103.960G
Lucky Miner LV07 BM1366 38 32.856G 29.030G
Bitaxe SUPRA BM1368 25 15.984G 15.553G
Bitaxe GAMMA BM1370 13 13.457G 10.850G
Rental 5 7.930G 228.406G
Bitaxe BM1397 4 895G 1.028G
N/A 4 264.000G 311.794G
Terminus R909 3 5.470G 5.190G
Antminer S3 2 300G 529G
Antminer S9 2 2.700G 2.480G
Nerd Qaxe+ BM1368 2 5.210G 4.620G
Whatsminer m30s+ 2 0G 5.000G
Lucky Miner LV05 BM1397 2 626G 1.214G
Antminer T15 1 342G 470G
Compac F 1 317G 294G
Unknown Device 1 0G 135G
Multible Devices 1 905G 1.010G
Bitaxe Hex BM1366 1 2.770G 2.640G
Braiins Mini Miner BMM100 1 758G 692G
Bitaxe Hex BM1368 1 3.810G 3.810G
Terminus R606 1 372G 642G

What is that for a miner?

microdrili_hex_01 with a hashrate from 264.000G?

If someone have new miner / pictures are not on our page one, please post your new picture here and i will put it on page one for all in our overview.

Best regards,
Willi

[willi9974]

today there is a BIG UPDATE

I ​​have been working on the code for about 5 days and have now merged both pools USA and EU into one table.

The table has the filter at the top again to filter by miner/worker and can now be sorted up and down with one click on each table column.

My eyes are closing and I don't feel good to test today, have to sleep

Check out whether the test page is OK and if everything is OK everyone has the happy choice of mining on the US or EU pool.

--> https://solorun.lima.zone/all.php

Feedback is welcome. But nothing will be made any prettier or more sexy, if anything then wrong, than only bugfixing.

Best wishes and good night
Willi

[oeapq]

works like a charm! Well done and good rest!

Edit: What's the correct pool-address now if I'd like to setup the miner to the EU-pool?

[willi9974]

works like a charm! Well done and good rest!

Edit: What's the correct pool-address now if I'd like to setup the miner to the EU-pool?

here we are and you can maybe add both, one as primary and the other als fallback.

Stratum Pool Server: solo.ckpool.org:3333 or eusolo.ckpool.org:3333

i have add the info on the first page.

Best regards and happy Mining,
Willi

[kekeck33]

Great job Willi.
I move my miner from USA (ping 190ms) to EU (ping 20 ms)
Im from EU.

[little_worker]

Well done Willi!

Thank you for your time and efforts! One potential point for future improvement - remove duplication of workers who switched from US to EU, now we can see both - active and inactive the same worker in the table, maybe can be some filtering by active hashrate or other ideas, but if we need to keep both for some reason - it's ok (to be able to switch the same worker between pools, etc).

Thanks!

[willi9974]

yes i know, the problem with the double worker, but if the ckpool will find a block or the pool will be restartet from ck, the the old worke will gone.
i have now switched also all my worker to the EU pool

if someone see some problems, please let me know to have an eye on it.

Best regards,
willi

[little_worker]

I got it, thank you!

I see tree devices named as Lucky Miner LV06 BM1366 with 15G, 16G, 27G in the table and it's very interesting what frequency, core voltage and cooling settings have to be used to achieve it 

Regards,

[oeapq]

Hey friends, happy to join the project, great idea!

Username: oeapq_1
Device: Lucky Miner LVL 07 at 1 TH/S

BTC_Address: bc1q7mgzxhw6ctje05aknrkryp05vuz6zx0ajn5w0v

Added another Miner for the cause!

Username: oeapq_2
Device: Lucky Miner LVL 07
Normal Speed: 1TH/S

[willi9974]

Hey friends, happy to join the project, great idea!

Username: oeapq_1
Device: Lucky Miner LVL 07 at 1 TH/S

BTC_Address: bc1q7mgzxhw6ctje05aknrkryp05vuz6zx0ajn5w0v

Added another Miner for the cause!

Username: oeapq_2
Device: Lucky Miner LVL 07
Normal Speed: 1TH/S

Welcome, you can try the miner self service to add your miner by your own...


Update

Miner Self service: https://solorun.lima.zone/writenewminer.php (link can also be found on the status page)

Here someone can add a new miner themselves and set the correct device using the dropdown menu.

Deleting old miners, renaming them or adding a different/new miner type is not possible for security reasons.