Lottery Solo Pool Miner Race on ckpool

[willi9974]

yes i know, the problem with the double worker, but if the ckpool will find a block or the pool will be restartet from ck, the the old worke will gone.
i have now switched also all my worker to the EU pool

if someone see some problems, please let me know to have an eye on it.

Best regards,
willi

[little_worker]

I got it, thank you!

I see tree devices named as Lucky Miner LV06 BM1366 with 15G, 16G, 27G in the table and it's very interesting what frequency, core voltage and cooling settings have to be used to achieve it 

Regards,

[oeapq]

Hey friends, happy to join the project, great idea!

Username: oeapq_1
Device: Lucky Miner LVL 07 at 1 TH/S

BTC_Address: bc1q7mgzxhw6ctje05aknrkryp05vuz6zx0ajn5w0v

Added another Miner for the cause!

Username: oeapq_2
Device: Lucky Miner LVL 07
Normal Speed: 1TH/S

[willi9974]

Hey friends, happy to join the project, great idea!

Username: oeapq_1
Device: Lucky Miner LVL 07 at 1 TH/S

BTC_Address: bc1q7mgzxhw6ctje05aknrkryp05vuz6zx0ajn5w0v

Added another Miner for the cause!

Username: oeapq_2
Device: Lucky Miner LVL 07
Normal Speed: 1TH/S

Welcome, you can try the miner self service to add your miner by your own...


Update

Miner Self service: https://solorun.lima.zone/writenewminer.php (link can also be found on the status page)

Here someone can add a new miner themselves and set the correct device using the dropdown menu.

Deleting old miners, renaming them or adding a different/new miner type is not possible for security reasons.

[oeapq]

Worked!

[willi9974]

Worked!

perfekt, than you can also add your worker oeapq_2 :-)

[oeapq]

Worked!

perfekt, than you can also add your worker oeapq_2 :-)

Shifted two more nano's over! Adding worked fine! Good job & good luck!

[kekeck33]

Hi Willi
My second device for user kekeck33_2 is Bitaxe ULTRA BM1366 (not Nano3).
Happy mining to all.
For christmas I wish to find a block in our race.
Regards
 

[willi9974]

Hi Willi
My second device for user kekeck33_2 is Bitaxe ULTRA BM1366 (not Nano3).
Happy mining to all.
For christmas I wish to find a block in our race.
Regards

thanks for the info, have it fixed

best regards and happy christmas
Willi

PS: here our actual overview

Hashrate all worker: 330,983 G

Actual bitcoin difficulty: 108,522,647,629,300

Sum of all shares (including inactive miner / BTC Diff): 1,791,364,077,012 / 108,522,647,629,300

Number of worker with active hashrate >= 200G in 5m: 248

Number of worker for payout with hashrate >= 200G in 5m and 7d: 235

Worker Summary by Device Type
Device Type   Worker Count   Hashrate (5m) Sum   Hashrate (7d) Sum
Bitaxe ULTRA BM1366   56   15.648G   19.738G
Avalon Nano 3   42   49.381G   83.385G
Lucky Miner LV06 BM1366   41   48.701G   38.832G
Lucky Miner LV07 BM1366   40   19.986G   25.489G
Bitaxe SUPRA BM1368   27   7.623G   11.991G
Bitaxe GAMMA BM1370   13   2.070G   7.231G
Bitaxe BM1397   4   179G   845G
Whatsminer m30s+   4   0G   5.792G
Antminer S9   3   7.580G   4.870G
Terminus R909   3   3.460G   4.590G
Antminer S3   2   289G   547G
Bitaxe Hex BM1368   2   4.210G   126.820G
Nerd Qaxe+ BM1368   2   2.500G   3.600G
Lucky Miner LV05 BM1397   2   655G   845G
Rental   2   0G   85.320G
N/A   1   0G   190G
Antminer T15   1   710G   434G
Compac F   1   310G   298G
Multible Devices   1   1.020G   1.020G
Bitaxe Hex BM1366   1   2.800G   2.660G
Braiins Mini Miner BMM100   1   675G   705G
Terminus R606   1   310G   404G
4x NewPac   1   0G   63G

[yettihead]

Username: yettihead_1
Device type: Compac F - Qty:4
Normal speed: 1.2 TH

Username: yettihead_2
Device type: R909
Normal speed: 1.4 TH

Wallet: bc1q6yqzvq72qglqu2lqy4gqq37crvlygd2kgerga9

[BTCLOLIPOP]

Hello I am new here! That are my asics:

BTCLOLIPOP_1     Bitaxe Ultra

BTCLOLIPOP_2     Bitaxe Ultra

BTCLOLIPOP_3     Bitaxe Ultra

I am happy that I can support your pool and the bitcoin network!

[EricCartmanFan]

In case of a block found

- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table

Basic requirement for payment:
- the miner has been always active for the last 7 days (you can see this in the CKpool statistics 5min and 7day)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
- If a miner finds a block but not over 200 GHs in 7 days, he still gets the 10% bonus

Hi Willi,
Thank you for this interesting opportunity!

I’d like to clarify the requirements.

In case we get block now.
Are all the green-highlighted workers on the screenshot payable, and only the ones in the red boxes are not?

https://i.ibb.co/qmbMXbb/lottery.jpg

Did I get that right?

[Bitcoin-Pool]

In case of a block found

- The user who found the block gets 10% extra
- The remaining 90% will be divided by the number of miners (devices / lines) from our table

Basic requirement for payment:
- the miner has been always active for the last 7 days (you can see this in the CKpool statistics 5min and 7day)
- Miner must contain the forum member name
- Minimum hashrate per miner of 200 GHs in 7 days
- If a miner finds a block but not over 200 GHs in 7 days, he still gets the 10% bonus

Hi Willi,
Thank you for this interesting opportunity!

I’d like to clarify the requirements.

In case we get block now.
Are all the green-highlighted workers on the screenshot payable, and only the ones in the red boxes are not?

https://i.ibb.co/qmbMXbb/lottery.jpg

Did I get that right?

no, both values ​​5min and 7 days must show over 200ghs

[EricCartmanFan]

no, both values ​​5min and 7 days must show over 200ghs

Emm, but how about this?

Willi,
Thank you for the very clear response...If I took my miner down to clean the fans or the power went out for a few hours, ... I am OK as long as my 7D hashrate didn't fall below 200gh/s right? or is it the 24h rate? 5 Minute?
Gholly  

A short outage should no problem, we use the 7day value.

[Minewithjack]

checked my stats, appears my lucky miner is hashing lower than the 200 asked. :S
Will give it a clean and see if she hash's any better.

Username: Minewithjack
Device type: Lucky Miner LV-06
Normal speed: 400+ GH/s
Payout Address:

[ArLuckZi]

Hello!!

My ArluckZi_3 has changed from LV06 to LV07.

BEST WISHES

[willi9974]

Hello!!

My ArluckZi_3 has changed from LV06 to LV07.

BEST WISHES

Hi ArluckZi,

i have update your device number 3 to the LV07.
Thanks for the information.

And here a new Status from today

Hashrate all worker: 280,710 G
Actual bitcoin difficulty: 109,782,075,598,910
Sum of all shares (including inactive miner / BTC Diff): 2,041,837,469,631 / 109,782,075,598,910
Number of worker with active hashrate >= 200G in 5m: 256
Number of worker for payout with hashrate >= 200G in 5m and 7d: 248

Code:

Worker Summary by Device Type
Device Type	Worker Count	Hashrate (5m) Sum	Hashrate (7d) Sum
Bitaxe ULTRA BM1366	35	11.393G	12.472G
Lucky Miner LV06 BM1366	24	11.777G	10.858G
Lucky Miner LV07 BM1366	15	9.894G	10.459G
Avalon Nano 3	13	33.270G	29.047G
Bitaxe SUPRA BM1368	12	5.200G	5.829G
Terminus R909	3	4.630G	4.310G
Bitaxe GAMMA BM1370	3	1.940G	2.013G
Compac F	2	1.718G	1.469G
Bitaxe Hex BM1368	2	3.840G	18.700G
Lucky Miner LV05 BM1397	2	564G	649G
N/A	2	451G	52G
Antminer T15	1	979G	445G
Antminer S9	1	3.750G	4.120G
Rental	1	0G	5.340G
Multible Devices	1	1.290G	1.030G
Bitaxe Hex BM1366	1	2.770G	2.670G
Braiins Mini Miner BMM100	1	804G	714G
Whatsminer m30s+	1	0G	2.070G
Nerd Qaxe+ BM1368	1	2.490G	2.490G
Terminus R606	1	324G	352G
4x NewPac	1	391G	331G

Best reafards,
Willi

[Gibberish8377]

I added 1 more miner
Now I have 2 miners:

• Gibberish8377_1
• Gibberish8377_2

Both miners are Lucky Miner Lv06 but due to unstable operation each miner mines about 350 GH/s.

Delete the employee Gibberish8377 from the table as I have changed their name to Gibberish8377_1.

[willi9974]

I added 1 more miner
Now I have 2 miners:

• Gibberish8377_1
• Gibberish8377_2

Both miners are Lucky Miner Lv06 but due to unstable operation each miner mines about 350 GH/s.

Delete the employee Gibberish8377 from the table as I have changed their name to Gibberish8377_1.

you can add new miner with the new Miner Self service: https://solorun.lima.zone/writenewminer.php
Please have a look, it is easy to use. put your new miner name in and select your mining device from the dropdown list and submit, thats all.

deletion from old miner will be go automaticly the the hashrate drops to zero, than after a time the worker will be remofed from the main pool list.

changing a miner from device type A to B needs a message to me...

Bes regards,
Willi

[willi9974]

Hello I am new here! That are my asics:

BTCLOLIPOP_1     Bitaxe Ultra

BTCLOLIPOP_2     Bitaxe Ultra

BTCLOLIPOP_3     Bitaxe Ultra

I am happy that I can support your pool and the bitcoin network!

Hello btclolipop,

welcome and happy Mining!
You can add our Miner Type by your own with the self service webside --> https://solorun.lima.zone/writenewminer.php
I will do it now, but if you add a new miner, you can also do it 
And if you have any questions, please write in the topic here.

Best regards,
Willi