One of my brand new out of the box Nano 3's won't run on high even with Canaan factory PSU.
![Cry](https://bitcointalk.org/Smileys/default/cry.gif)
Switched PSU's with one of the others yielded the same result. It's not the PSU so it must be something else in the hardware.
It does run on medium all day and night however...
I found that sometimes AN3 just won't let itself set to 'High' even after running om 'high' for a while it turns out it has suddenly has thrown itself offline I then notice it's mining on 'Low' ...
If that's the case (ie. AN3 going by itself form 'High' to 'Low') there's no way to get it back to 'High' but to either pull powercord **) or using 'AvalonNano3RecoveryPackage' complete reset to get it to go to 'High.'
For me the Avalon Nano 3 is a very unstable device: Besides from random disconnects the biggest issue is that:
Avalon Nano 3 always refuses to reconnect to last configured wifi after reboot (w/static IP)It's been "a battle" using the AN3 since I got it about a week ago, somehow the FW seems very unstable:
- AN3 logs off intermittently /throwing itself 'off' the net for whatever reason where reboot/power off is only option.
- Now also fan spinning out of control https://ibb.co/kGyhwKT
- After reboot I'm forced to go through initial wifi-setup to be able to resume mining
Text:
The worst thing is the pain that comes with the fact that
every change in setup needs a reboot. BUT, doing a reboot the AN3 then demands that I go through 'First time setup' again - every time!!! - because it can't re-connect to same net previous setup by me
Even after no errors when just turning it 'Off'
the Avalon Nano 3 refuses to connect to last used network by itself after reboot. No way, never done it even once!
But at same time the AN3 can run for +18 to 24 hrs without any errors (aot this tells me it's
not the PU (USAMS 140W USB-C 3.1) causing errors) Temp is 50/90 *C =pretty normal
(**: which leads to having to go through setup again because it't won't reconnect back to previous setup wifi