Claymore XPM GPU Miner discussion

[SpeedDemon13]

Waiting for 5970 and 5870's miner version 

Not sure if Claymore is willing to code for it or if he will.

[1715490882]

1715490882

[seljak]

Ok stats after 24hours: 1xpm(0.15 confirmed, 0.9 unconfirmed) about 10h 1xr9 270 + 14hours 2x r9 270. Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ). Was hoping for at least 3xpm from my setup. Going to let this run for a few hours then off to something else. Too bad. Nice effort from dev nonetheless. Will try again when the new version gets released.

[kev7112001]

Ok stats after 24hours: 1xpm(0.15 confirmed, 0.9 unconfirmed) about 10h 1xr9 270 + 14hours 2x r9 270. Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ). Was hoping for at least 3xpm from my setup. Going to let this run for a few hours then off to something else. Too bad. Nice effort from dev nonetheless. Will try again when the new version gets released.

they arent getting that now with the diff up now

[slimdim]

in personal stats i found 1 block
Found blocks - 1

and in stats - blocks found - my login isn't present
why?

p.s. sorry i find )

[Griffith]

Ok stats after 24hours: 1xpm(0.15 confirmed, 0.9 unconfirmed) about 10h 1xr9 270 + 14hours 2x r9 270. Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ). Was hoping for at least 3xpm from my setup. Going to let this run for a few hours then off to something else. Too bad. Nice effort from dev nonetheless. Will try again when the new version gets released.

you need to leave it running for 24 hours straight. around the 24 hour mark is when i started to find 10ch 11ch and 1 12ch chains. these are the ones that payout more and they take longer to find. so leave it running for 24 hours without turning your cards off. this payout will be more accurate. im making about 1xpm per hour doing this

[seljak]

Ok stats after 24hours: 1xpm(0.15 confirmed, 0.9 unconfirmed) about 10h 1xr9 270 + 14hours 2x r9 270. Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ). Was hoping for at least 3xpm from my setup. Going to let this run for a few hours then off to something else. Too bad. Nice effort from dev nonetheless. Will try again when the new version gets released.

you need to leave it running for 24 hours straight. around the 24 hour mark is when i started to find 10ch 11ch and 1 12ch chains. these are the ones that payout more and they take longer to find. so leave it running for 24 hours without turning your cards off. this payout will be more accurate. im making about 1xpm per hour doing this

1xpm/h on what hardware?
2x r270 without stoping for the last 15hours....still...only found 5 9ch and 1 10ch shares. Doubt very much it will come close to being profitable.

[djm34]

Ok stats after 24hours: 1xpm(0.15 confirmed, 0.9 unconfirmed) about 10h 1xr9 270 + 14hours 2x r9 270. Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ). Was hoping for at least 3xpm from my setup. Going to let this run for a few hours then off to something else. Too bad. Nice effort from dev nonetheless. Will try again when the new version gets released.

you need to leave it running for 24 hours straight. around the 24 hour mark is when i started to find 10ch 11ch and 1 12ch chains. these are the ones that payout more and they take longer to find. so leave it running for 24 hours without turning your cards off. this payout will be more accurate. im making about 1xpm per hour doing this

1xpm/h on what hardware?
2x r270 without stoping for the last 15hours....still...only found 5 9ch and 1 10ch shares. Doubt very much it will come close to being profitable.

The problem is that ypool says that the share last for 160 block...  well it doesn't seem to be the case, I found one 9ch this morning the graph shows a nice peak of 35share which stayed only 1 block (kind of unhappy with that...). Sometimes they last longer (but nowhere near 160block) sometimes they don't...

[kev7112001]

just to let you know ypool sucks and most people dont use them thats why i dont like this miner cause it uses jhprimeminer which is ypool only protocol wished it was beeeeer compatible but unless the dev uses something else like xolo it wont be

[primer10]

any peeps actually measure the power consumption from GPU XPM mining? vs CPU? Efficiency?

[djm34]

any peeps actually measure the power consumption from GPU XPM mining? vs CPU? Efficiency?

it has become quite obsessive lately... anyhow on gpu around 150W on a R9 290x

[primer10]

any peeps actually measure the power consumption from GPU XPM mining? vs CPU? Efficiency?

it has become quite obsessive lately... anyhow on gpu around 150W on a R9 290x

definitely .. while GPU XPM miner is faster, it has to be profitable as well...

[slimdim]

25 minutes ago the server dumped my connection... fulfilled all 26 hours - as a result I found to 1 block and in 26 hours dropped 3.5 xpm payout and in balance -
BALANCE (XPM)
0.21320390
UNCONFIRMED (XPM)
2.77690121

and total 6.5 XPM in 26 hours

2*280x vapor-x

=0.01152499 btc
/2=0,005762495 btc in 1 card 280x...so small 

[Griffith]

claymore, i dont mind the 10% dev fee. but can you make it possible to solomine with this miner as well?

[primeGPU]

Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ).

6xpm/day on 1x280x is with a different miner.

[SpeedDemon13]

Have to wait until the next miner comes out.

Pool mining advantage is the frequent payments. Solo, you can get a full block to yourself. Many things determine which one is profitable by your equipment, network diff, luck factor and miner efficiency.

[Griffith]

Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ).

6xpm/day on 1x280x is with a different miner.

what miner?

[SpeedDemon13]

Very disappointing after seeing guys with 1x 280x getting 6xpm/day(and not satisfied ).

6xpm/day on 1x280x is with a different miner.

what miner?

LOL...Look at his username, his miner.....

[Claymore]

Within 24 hours I will release new version of my XPM GPU miner for ypool. Crazy speedup 50-60% on all cards. Up to 1.6 chains per day on a single 290X. Be ready

[SpeedDemon13]

Within 24 hours I will release new version of my XPM GPU miner for ypool. Crazy speedup 50-60% on all cards. Up to 1.6 chains per day on a single 290X. Be ready

Righteous, that is a good speed up...

[seljak]

is better having seperate worker for each card or one worker for all cards?