Claymore XPM GPU Miner discussion

[aistto]

v8 -> v9 power consumption jump ~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.

It's my mistake, VGA wasn't downclock

Power consumption from wall.

I measured it on one of my rig, not new (old):
 - CPU: core2duo
 - Mem: DDR2 2Gb
 - PSU: Enermax 550W (old, even not bronze)
 - VGA: 2*XFX280X GPU/MEM:1030/1500 VCDD:1v

miner setting GPU 0/1:    -ss 1/2 -t default/8

Miner v2.0 375w
Miner v2.1 380w
Miner v3.0 405w
Miner v3.1b 410w
Miner v4.0 405w
Miner v5.0 400w
Miner v6.0 395w

I don't remember v7 and v8 power consumption
but I did last measurement
v9.1 460

[1715585566]

1715585566

[1715585566]

1715585566

[1715585566]

1715585566

[SpeedDemon13]

v8 -> v9 power consumption jump ~35%

How did you measure it?
What cards do you use?
I see much less jump, may be 5-10%.

It's my mistake, VGA wasn't downclock

Power consumption from wall.

I measured it on one of my rig, not new (old):
 - CPU: core2duo
 - Mem: DDR2 2Gb
 - PSU: Enermax 550W (old, even not bronze)
 - VGA: 2*XFX280X GPU/MEM:1030/1500 VCDD:1v

miner setting GPU 0/1:    -ss 1/2 -t default/8

Miner v2.0 375w
Miner v2.1 380w
Miner v3.0 405w
Miner v3.1b 410w
Miner v4.0 405w
Miner v5.0 400w
Miner v6.0 395w

I don't remember v7 and v8 power consumption
but I did last measurement
v9.1 460

That's getting a little high for wattage for the v9.1. Maybe try to underclock the memory and it shouldn't affect the cpd as long as the core clock isn't changed.

[tfl3rd]

 Question:

1 of 2 GPU's keeps dropping out - stays connected to Ypool but quits producing shares ...

Claymore V9.1, Gigabyte board, AX860i PSU, Sempron 145 (unlocked - 2 cores operating), 8G RAM DDR3, 2 ASUS R290 GPU's ... some times it runs for 15 to 16 hours, sometimes 15 min ? AMD Name   AMD Radeon R9 200 Series

Adapter Description   AMD Radeon R9 200 Series
Adapter RAM   (1,048,576) bytes

Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll

Driver Version   13.251.0.0
 
Any troubleshooting suggestions ?

[smtn512]

Any chance of seeing a diff 11 optimized miner soon? Finding a diff 10 share gives less than a 5% chance of actually being rewarded by the network now...

[Claymore]

Question:

Any troubleshooting suggestions ?

Try to follow "troubleshooting" section in readme. If it does not help it means that probably your system is unstable for some reason. I have a few rigs based on 290 series cards and they all work properly, I test all versions on 290X cards mostly.

[Claymore]

Any chance of seeing a diff 11 optimized miner soon? Finding a diff 10 share gives less than a 5% chance of actually being rewarded by the network now...

I already have v9.1 for Diff 11, but it is slower than v9.1 for Diff 10 since it produces much less 10ch, so I decided not to release it right now. Version for Diff 11 will work faster at Diff 10.98-10.99, I will release it then.

[SpeedDemon13]

Question:

1 of 2 GPU's keeps dropping out - stays connected to Ypool but quits producing shares ...

Claymore V9.1, Gigabyte board, AX860i PSU, Sempron 145 (unlocked - 2 cores operating), 8G RAM DDR3, 2 ASUS R290 GPU's ... some times it runs for 15 to 16 hours, sometimes 15 min ? AMD Name   AMD Radeon R9 200 Series

Adapter Description   AMD Radeon R9 200 Series
Adapter RAM   (1,048,576) bytes

Installed Drivers   aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll

Driver Version   13.251.0.0
 
Any troubleshooting suggestions ?

Are you mining at overclock settings? If yes, then try default settings first. Check to make sure your power supply isn't having any issues. I had a burn/melted pci-e power connector gave me an issue on my Silverstone 1000 watt psu, which I replaced and don't have no issues with overclocking my core clock.

[bclcjunkie]

how's everyone's luck so far? i havent mined for some time now...

here are my stats for lulz...

Sun May 18 16:01:54 2014
New Block: 550670 - Current Diff: 10.961836,   GPU CNT: 8 (4x7990)
Total/Valid blocks: [ 0 / 0 ]  -  Max diff: 10.947084
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   632K] [    633] [     80] [      4] [      1] [      0] [      0]
  ch/h: [1470844] [1470.864] [185.891] [  9.295] [  2.324] [  0.000] [  0.000]
Estimated CPD: 40.7241, Average CPD: 55.7674, Mining time: 00:25

Sun May 18 16:02:00 2014
New Block: 550670 - Current Diff: 10.961836,   GPU CNT: 4 (4xr9 290)
Total/Valid blocks: [ 0 / 0 ]  -  Max diff: 9.986997
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   464K] [    469] [     58] [     10] [      0] [      0] [      0]
  ch/h: [ 986081] [995.201] [123.074] [ 21.220] [  0.000] [  0.000] [  0.000]
Estimated CPD: 27.1925, Average CPD:  0.0000, Mining time: 00:28

[Claymore]

how's everyone's luck so far? i havent mined for some time now...

here are my stats for lulz...

Sun May 18 16:01:54 2014
New Block: 550670 - Current Diff: 10.961836,   GPU CNT: 8 (4x7990)
Total/Valid blocks: [ 0 / 0 ]  -  Max diff: 10.947084
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   632K] [    633] [     80] [      4] [      1] [      0] [      0]
  ch/h: [1470844] [1470.864] [185.891] [  9.295] [  2.324] [  0.000] [  0.000]
Estimated CPD: 40.7241, Average CPD: 55.7674, Mining time: 00:25

Sun May 18 16:02:00 2014
New Block: 550670 - Current Diff: 10.961836,   GPU CNT: 4 (4xr9 290)
Total/Valid blocks: [ 0 / 0 ]  -  Max diff: 9.986997
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   464K] [    469] [     58] [     10] [      0] [      0] [      0]
  ch/h: [ 986081] [995.201] [123.074] [ 21.220] [  0.000] [  0.000] [  0.000]
Estimated CPD: 27.1925, Average CPD:  0.0000, Mining time: 00:28

Why do you think that you are unlucky? You mine only for 28 minutes
With your 68 CPD you will find 4-5 blocks a day:
http://anty.info/primecoin-calculator/

[bclcjunkie]

i know, just started.. i was just curious about others... 

how's everyone's luck so far? i havent mined for some time now...

here are my stats for lulz...

Sun May 18 16:01:54 2014
New Block: 550670 - Current Diff: 10.961836,   GPU CNT: 8 (4x7990)
Total/Valid blocks: [ 0 / 0 ]  -  Max diff: 10.947084
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   632K] [    633] [     80] [      4] [      1] [      0] [      0]
  ch/h: [1470844] [1470.864] [185.891] [  9.295] [  2.324] [  0.000] [  0.000]
Estimated CPD: 40.7241, Average CPD: 55.7674, Mining time: 00:25

Sun May 18 16:02:00 2014
New Block: 550670 - Current Diff: 10.961836,   GPU CNT: 4 (4xr9 290)
Total/Valid blocks: [ 0 / 0 ]  -  Max diff: 9.986997
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [   464K] [    469] [     58] [     10] [      0] [      0] [      0]
  ch/h: [ 986081] [995.201] [123.074] [ 21.220] [  0.000] [  0.000] [  0.000]
Estimated CPD: 27.1925, Average CPD:  0.0000, Mining time: 00:28

Why do you think that you are unlucky? You mine only for 28 minutes
With your 68 CPD you will find 4-5 blocks a day:
http://anty.info/primecoin-calculator/

[ans34]

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

[Antioxidant]

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

[serpiente12]

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

+1

[csa1234]

just switch to gpool.net

[hashfun]

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

+1

Yes same having problem , last week then i switch to solo mining.
but from last 4 days there is no block found so unlucky


@csa1234
which version you use for mining gpool i thikn its only CPU Pool

[bclcjunkie]

pretty much same results... ypool dominates the scene now...unless there's another viable pool i'm taking a break from mining primecoins for now...

Does anyone have problems with connecting to ypool? Some of miner instances can't connect from start

yes, I have this problem

+1

Yes same having problem , last week then i switch to solo mining.
but from last 4 days there is no block found so unlucky


@csa1234
which version you use for mining gpool i thikn its only CPU Pool

[csa1234]

im solo mining... making only 2 block per day (14.94 XPM including 10% claymore fees)

14.94 XPM x 0.001294 BTC = 0.01934 BTC/day (6 x GPU)

x11 mining = 0.02 BTC/day (6xGPU) 50% less energy consumption + 60°C stable temps with fan on my rig

Time to move on to X11.... good bye primecoin

[hashfun]

im solo mining... making only 2 block per day (14.94 XPM including 10% claymore fees)

14.94 XPM x 0.001294 BTC = 0.01934 BTC/day (6 x GPU)

x11 mining = 0.02 BTC/day (6xGPU) 50% less energy consumption + 60°C stable temps with fan on my rig

Time to move on to X11.... good bye primecoin

Check PM question about out of XPM

[skyyyy]

waiting the new version

[Claymore]

I will release v10 with further speedup in 1-2 days.