ghostlander
Legendary
Offline
Activity: 1241
Merit: 1020
No surrender, no retreat, no regret.
|
|
April 05, 2014, 04:28:41 PM |
|
Lets do some math real quick
open your calculator and do
2 to the 10th power and tell me what you get.
Stop playing a fool. void scrypt(const uint8_t *password, size_t password_len, const uint8_t *salt, size_t salt_len, uint8_t Nfactor, uint8_t rfactor, uint8_t pfactor, uint8_t *out, size_t bytes) { scrypt_aligned_alloc YX, V; uint8_t *X, *Y; uint32_t N, r, p, chunk_bytes, i; scrypt_aligned_alloc YX, V; uint8_t *X, *Y; uint32_t N, r, p, chunk_bytes, i;
if (Nfactor > scrypt_maxN) scrypt_fatal_error("scrypt: N out of range"); if (rfactor > scrypt_maxr) scrypt_fatal_error("scrypt: r out of range"); if (pfactor > scrypt_maxp) scrypt_fatal_error("scrypt: p out of range");
N = (1 << (Nfactor + 1)); r = (1 << rfactor); p = (1 << pfactor);
chunk_bytes = SCRYPT_BLOCK_BYTES * r * 2; V = scrypt_alloc((uint64_t)N * chunk_bytes); YX = scrypt_alloc((p + 1) * chunk_bytes);
/* 1: X = PBKDF2(password, salt) */ Y = YX.ptr; X = Y + chunk_bytes; scrypt_pbkdf2(password, password_len, salt, salt_len, 1, X, chunk_bytes * p);
/* 2: X = ROMix(X) */ for (i = 0; i < p; i++) scrypt_ROMix((scrypt_mix_word_t *)(X + (chunk_bytes * i)), (scrypt_mix_word_t *)Y, (scrypt_mix_word_t *)V.ptr, N, r);
/* 3: Out = PBKDF2(password, X) */ scrypt_pbkdf2(password, password_len, X, chunk_bytes * p, 1, out, bytes);
scrypt_ensure_zero(YX.ptr, (p + 1) * chunk_bytes);
scrypt_free(&V); scrypt_free(&YX); }
|
|
|
|
precrime3
Member
Offline
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
|
|
April 05, 2014, 04:28:54 PM |
|
What is the password for the rar file?
"comebackat4pmest" no caps. 7zip is telling me this is wrong password...
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
April 05, 2014, 04:33:32 PM |
|
What is the password for the rar file?
"comebackat4pmest" no caps. 7zip is telling me this is wrong password...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
enerbyte
|
|
April 05, 2014, 04:34:30 PM |
|
What is the password for the rar file?
"comebackat4pmest" no caps. 7zip is telling me this is wrong password... LOL
|
|
|
|
precrime3
Member
Offline
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
|
|
April 05, 2014, 04:37:38 PM |
|
To the last two posts.... What? Im so confused, did I do something wrong
|
|
|
|
ando0022
Member
Offline
Activity: 98
Merit: 10
|
|
April 05, 2014, 04:38:59 PM |
|
To the last two posts.... What? Im so confused, did I do something wrong READ the Password again ...
|
|
|
|
ivanlabrie
|
|
April 05, 2014, 04:42:25 PM |
|
I can post settings for any card...lol
Just use a proper miner like yacminer 3.5 and off you go.
Question: what's that bunch of code ghostlander posted? :/
|
|
|
|
precrime3
Member
Offline
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
|
|
April 05, 2014, 04:52:42 PM |
|
To the last two posts.... What? Im so confused, did I do something wrong READ the Password again ... Haha lol, darn. Guess I gotta wait then
|
|
|
|
defaced (OP)
Legendary
Offline
Activity: 2198
Merit: 1014
Franko is Freedom
|
|
April 05, 2014, 05:04:29 PM |
|
To the last two posts.... What? Im so confused, did I do something wrong READ the Password again ... Haha lol, darn. Guess I gotta wait then haha
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
April 05, 2014, 05:04:38 PM |
|
I can post settings for any card...lol
Just use a proper miner like yacminer 3.5 and off you go.
Question: what's that bunch of code ghostlander posted? :/
If you have something for the 290x (or just the basic setup with yacminer to work on that scrypt:64) Is there a benchmark mode ?
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
lajz99
|
|
April 05, 2014, 05:20:11 PM |
|
Can anyone tell me what the config should look like for a 280x on sgminer?
|
|
|
|
ozie
|
|
April 05, 2014, 05:37:41 PM |
|
Higher hashrate, more security.
If you were to evenly match the cost of hashrates between Aiden, litecoin, and vertcoin It would take less energy and heat to create 1 mh with aiden then it would the other two.
Do you really want to compare Hashrate between different Algos and then say the faster one is more secure What a fking joke. Why not go SHA3 then its much faster then any Scrypt Algos... Negating your only viable point that your coin separates from other Copycoins there is no reason to mine this shit.
|
|
|
|
precrime3
Member
Offline
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
|
|
April 05, 2014, 05:40:28 PM |
|
Higher hashrate, more security.
If you were to evenly match the cost of hashrates between Aiden, litecoin, and vertcoin It would take less energy and heat to create 1 mh with aiden then it would the other two.
Do you really want to compare Hashrate between different Algos and then say the faster one is more secure What a fking joke. Why not go SHA3 then its much faster then any Scrypt Algos... Negating your only viable point that your coin separates from other Copycoins there is no reason to mine this shit. Why not go blake256 which is 3x faster than sha256?
|
|
|
|
defaced (OP)
Legendary
Offline
Activity: 2198
Merit: 1014
Franko is Freedom
|
|
April 05, 2014, 05:41:59 PM |
|
Higher hashrate, more security.
If you were to evenly match the cost of hashrates between Aiden, litecoin, and vertcoin It would take less energy and heat to create 1 mh with aiden then it would the other two.
Do you really want to compare Hashrate between different Algos and then say the faster one is more secure What a fking joke. Why not go SHA3 then its much faster then any Scrypt Algos... Negating your only viable point that your coin separates from other Copycoins there is no reason to mine this shit. I like blake256 AND sha3.
|
|
|
|
defaced (OP)
Legendary
Offline
Activity: 2198
Merit: 1014
Franko is Freedom
|
|
April 05, 2014, 05:44:48 PM |
|
But this isnt sha3 or blake256, this is scrypt-nfactor-6
or like ghostlander would say.
Its N=5+1
|
|
|
|
lajz99
|
|
April 05, 2014, 05:49:31 PM Last edit: April 05, 2014, 06:26:31 PM by lajz99 |
|
.025 btc bounty for the first person to PM me step by step instructions (pre-launch) on how to solo mine with 280x's. (not familiar with sgminer/nfactor)
Claimed.
|
|
|
|
ozie
|
|
April 05, 2014, 05:50:41 PM |
|
But this isnt sha3 or blake256, this is scrypt-nfactor-6
or like ghostlander would say.
Its N=5+1
Both new Algos which where worth mining when the came out fresh. Your "scrypt-og" or "scrypt-n6" or whatever you want to call it is NOT new. Just changing a variable does not make it unique in any way. Vertcoin also "just" changed the n-Factor. But they have a purpose behind this change. That is another thing your are lacking!
|
|
|
|
defaced (OP)
Legendary
Offline
Activity: 2198
Merit: 1014
Franko is Freedom
|
|
April 05, 2014, 05:55:37 PM |
|
But this isnt sha3 or blake256, this is scrypt-nfactor-6
or like ghostlander would say.
Its N=5+1
Both new Algos which where worth mining when the came out fresh. Your "scrypt-ng" or "scrypt-n6" or whatever you want to call it is NOT new. Just changing a variable does not make it unique in any way. Vertcoin also "just" changed the n-Factor. But they have a purpose behind this change. That is another thing your are lacking! There is a purpose behind the change, to make scrypt hash better for gpu's. Changing memory requirements on scrypt to meet certain needs is not new, you are correct. I admit using scrypt with default settings isnt terribly innovative.. considering no one else has done it. YAC however did have nfactor 6 mining for some time though, but it wasnt a fixed n parameter like with Aiden. You can either mine it or dont. The options are pretty binary for you right now lol.
|
|
|
|
Syth
|
|
April 05, 2014, 05:56:37 PM |
|
|
|
|
|
defaced (OP)
Legendary
Offline
Activity: 2198
Merit: 1014
Franko is Freedom
|
|
April 05, 2014, 05:57:47 PM |
|
.025 btc bounty for the first person to PM me step by step instructions (pre-launch) on how to solo mine with 280x's. (not familiar with sgminer/nfactor)
Hey buddy my bat file looks like this setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 del *.bin Color 0A sgminer This is my config file for 270x's { "pools" : [ { "url" : "http://192.168.1.125:4560", "user" : "gooduser", "pass" : "badpassword" } ] , "intensity" : "19", "nfactor" : "6", "worksize" : "256", "lookup-gap" : "2", "thread-concurrency" : "24000", "shaders" : "0", "gpu-threads" : "1", "gpu-engine" : "900", "gpu-fan" : "30-90", "gpu-memclock" : "1200", "gpu-memdiff" : "0", "gpu-powertune" : "0", "gpu-vddc" : "0.000", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "auto-fan" : true, "expiry" : "10", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin", "no-client-reconnect" : true }
|
|
|
|
|