***3d Printing Services*** 3d Prints for BTC/LTC and USD! Quality! Quick!

[mstrongbow]

3D printing and rapid prototyping services now being offered to the Bitcointalk.org community! Accepting payments in BTC/LTC and USD. With a print envelope of 8.8*5.7*5.9 inches (225mm*145mm*150mm-xyz), high resolution prints (0.10mm layer height) and FAST printing speeds...I am able to offer reliable and quality 3d prints for artists, product designers, schools, personal, collaborations and even toys/gadgets for that special someone (child, spouse etc.)

Check out www.thingiverse.com and www.MyMiniFactory.com for 1000's of 3d models, a lot of which are ready to print! (just a couple of the many 3d model repositories). No I WILL NOT print you a firearm but I will gladly print other parts and/or accessories for your beloved firearms (grips, scope mounts, clip holders etc.) as those items do not require an FFL in order to manufacture/sell to the general public.

Currently only offering SINGLE color/material prints in a variety of colors as I am still fine-tuning both print heads to work in unison. Currently you may choose from either ABS, PLA or NinjaFlex (rubbery) materials and I am testing prints with LayBrick (ceramic), LayWoo3d (wood), Taulman Nylon and EcoFlex brand/types of filaments(to name a few) in 1.75mm size.

Also offering 3D modeling services @$25/hr. and soon I will have a 3D scanning setup up and running.

*Small setup fees
*Affordable rates
*Volume pricing available
*Veteran discounts

Accepting models to be printed in .stl and .skp (working .obj and other file type imports)

No job too big or too small (within capable printing parameters)
Small run production jobs will be considered.

Examples of my prints/printer in work can be found at the links below...
https://www.facebook.com/adventur3d (boycotting FB for the time being)
https://bitcointalk.org/index.php?topic=540080.0
http://s1141.photobucket.com/user/MZStrongbow/library/3dP?sort=3&page=1

Pricing will be $3/cm³ (or $10/printing hour-whichever is less) for ABS prints with a $10 setup fee.
Accepting payments in BTC/LTC/Dogecoin/Darkcoin and USD.

Feel free to post up any questions, comments, concerns ideas etc or you can PM me as well.
Thanks!


My other "ads"....

https://bitcointalk.org/index.php?topic=645228.0
https://bitcointalk.org/index.php?topic=652656.0

[AT101ET]

Shame this isn't a UK service.
I'm looking for someone who can help nearby as I'm running through numerous prototypes.
Great idea though and good luck!

[bitterdog]

This is something ive been looking for ever since I cut the bottom of my plenum box in my truck to get to the Blend Door.

how does this work? if I cut a piece out of cardboard stock and send it to you - to the exact dimensions you can make what I cut out?

The piece I need is roughly the size of a 3" x 5" card. 95% is just a flat piece with a recessed round divot the size of like a dime

[mstrongbow]

Shame this isn't a UK service.
I'm looking for someone who can help nearby as I'm running through numerous prototypes.
Great idea though and good luck!

Check out

www.3dhubs.com
www.MakeXYZ.com
www.Maker6.com

You might be able to find someone local to ya mate!

Apologies on the late reply...I did not receive any notifications from Bitcointalk.org about any new posts.

This is something ive been looking for ever since I cut the bottom of my plenum box in my truck to get to the Blend Door.

how does this work? if I cut a piece out of cardboard stock and send it to you - to the exact dimensions you can make what I cut out?

The piece I need is roughly the size of a 3" x 5" card. 95% is just a flat piece with a recessed round divot the size of like a dime

Yo, just sending you a PM now, apologies for the delayed/late reply, I didn't receive any notifications from the forums about a new post in my thread


edit: I am now set to receive notifications of new postings in this thread, yay!

Pics coming soon!

[mstrongbow]

bump

For pics and other info, check out my FB blog...
https://www.facebook.com/adventur3d

[mstrongbow]

Some of my recent prints for a good friend/customer can be found here...

http://ivapes.3d.tk/


Stay tuned for pics/vids of some of my upcoming 3d printing projects

[mstrongbow]

BlackArrow software breakout board case/mounts...

available here https://bitcointalk.org/index.php?topic=645228.0

[mstrongbow]

New colors in stock!




https://bitcointalk.org/index.php?topic=645228.0
https://bitcointalk.org/index.php?topic=652656.0

[mstrongbow]

bump

[Armis]

We are currently looking for someone to create 3D file in STL format for our set of 17 unique player pieces.

Wood player pieces can be seen here:
https://lh6.googleusercontent.com/-96oBkgZ7l68/T44bZoBJ2SI/AAAAAAAAAeU/aBx2Z0fXXAo/s720/002.JPG

Our 3D electronic player can be seen here in gold:
https://picasaweb.google.com/108633093686363320090/Armis

You quoting based on look of wood design, solid base, hollow core at the following measurements:

Flag - 2.75 inch tall from bottom of base to tip-top,
Pres - 2.5 inch
VP - 2.25 inch
Army - 2.25 inch

Navy
a/c - .75 inch x 1.5 inch (hangs over base a bit)
and
sub - .75 inch x 1.5 inch

Airforce
jet - 2.5 inch
and
heli - 2.25 inch

two (2) Marines - 2.5 inch each
Coast Guard - .75 inch x 1.5 inch
Reserve - 2.5 inch
Religion - 2.5 inch
Diplomat - 2.5 inch
Media - 1.75 inch
Child - 1.75 inch
Nuke - 2 inch
and
Mover - 1.5 inch


Perhaps some of my 2D files could help you

https://drive.google.com/file/d/0B3EbzH6xpa1vRC1GejdVUnh6dVU/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vRnRTdDRGQjJqdFE/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vTkdvdjF0aDVLMDg/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vV0pGZnpOMkFoYlk/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vaUVGTGZjQkl5ZnM/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vdDZpcXZ5QVVRZlk/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vdzItSHVXSVdvZjQ/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1veEtwMFhKUDdybE0/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1veVZ4ZGRoZXFuRVk/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vekVRUGRqMmd0Ymc/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1velJya2NSY0EtNTg/edit?usp=sharing

[zolace]

this is great I already heard they are going to be doing 3d priting with metal very soon, Im sure these machines are going to cost alot.  I was thinking of investing in a 3d printer for myself just in case if something breaks, do they have 3d scanning yet?

[mstrongbow]

We are currently looking for someone to create 3D file in STL format for our set of 17 unique player pieces.

Wood player pieces can be seen here:
https://lh6.googleusercontent.com/-96oBkgZ7l68/T44bZoBJ2SI/AAAAAAAAAeU/aBx2Z0fXXAo/s720/002.JPG

Our 3D electronic player can be seen here in gold:
https://picasaweb.google.com/108633093686363320090/Armis

You quoting based on look of wood design, solid base, hollow core at the following measurements:

Flag - 2.75 inch tall from bottom of base to tip-top,
Pres - 2.5 inch
VP - 2.25 inch
Army - 2.25 inch

Navy
a/c - .75 inch x 1.5 inch (hangs over base a bit)
and
sub - .75 inch x 1.5 inch

Airforce
jet - 2.5 inch
and
heli - 2.25 inch

two (2) Marines - 2.5 inch each
Coast Guard - .75 inch x 1.5 inch
Reserve - 2.5 inch
Religion - 2.5 inch
Diplomat - 2.5 inch
Media - 1.75 inch
Child - 1.75 inch
Nuke - 2 inch
and
Mover - 1.5 inch


Perhaps some of my 2D files could help you

https://drive.google.com/file/d/0B3EbzH6xpa1vRC1GejdVUnh6dVU/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vRnRTdDRGQjJqdFE/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vTkdvdjF0aDVLMDg/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vV0pGZnpOMkFoYlk/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vaUVGTGZjQkl5ZnM/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vdDZpcXZ5QVVRZlk/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vdzItSHVXSVdvZjQ/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1veEtwMFhKUDdybE0/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1veVZ4ZGRoZXFuRVk/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1vekVRUGRqMmd0Ymc/edit?usp=sharing
https://drive.google.com/file/d/0B3EbzH6xpa1velJya2NSY0EtNTg/edit?usp=sharing

I think this is something I could tackle. I'm booked solid for the next week working on new designs but I can definitely fit this project in very soon.

this is great I already heard they are going to be doing 3d priting with metal very soon, Im sure these machines are going to cost alot.  I was thinking of investing in a 3d printer for myself just in case if something breaks, do they have 3d scanning yet?

Yeah the 3d printers that print in metal are way expensive. On the other hand, FDM (fused deposition modeling) style printers are becoming super affordable and within the next few years, I imagine 70% of homes will have one! There are a few scanners on the market...I am waiting on my Rubicon scanner to be completed and delivered, hopefully within the next couple of months, haha

[Armis]

Thanks mstrongbow, but as it turns out one of my former associates (he did the gold pieces) decided to do the job.  I posted it on oDesk, got about 20 responses, he wasn't the lowest bid but I value loyalty greatly he got the job, I trust he will do a great job.

I'm still looking for someone to print 2 or 3 game sets; your rates appear reasonable so I'll request a bid from you when the file is finished.

[mstrongbow]

Bump.

Ordered a 2nd printer! I will be able to up my production and development as I won't need to stop printing orders just to test new products!

Super stoked!
Don't forget to check out my products for sale thread...
https://bitcointalk.org/index.php?topic=694666.0

[digicoinuser]

Ah yeah!!! Printing in metal soon! Super stoked!!!

https://www.matterhackers.com/store/3d-printer-filament/colorfabb-bronzefill-175-750g

Now available...High density, x-ray shielding filament for those extra-ordinary 3d prints!

http://gmass.turnermedtech.com/

Totally stoked about all the new filament materials coming out!

If you still do custom 3D printing and can use the X-Ray/Shielding filament, I would like a hard drive case for an external 3.5" hard drive enclosure made from Gmass High Density.