wogfun (OP)
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 07, 2012, 06:54:47 AM |
|
Hi everybody. I'm new here and have been mining no longer than a month. Tonight I had an idea that may or may not work so I'll get right to it. I'm using an HD6250 oc'd to 950mhz and am happy with the results, about 250 mh/s. I just remembered that my asus board has a somewhat useless and disabled intergrated 4250 chipset just sitting there doing nothing. So I enabled it, loaded the new drivers, and windows 7 and afterburner report that the chipset is alive and well, ready to go. I've read in a few places that the 4250 does not support opencl however on the AMD driver page http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx, there is a fairly new driver from december 2011, for opencl support. I went ahead and downloaded and installed this driver but GUIminer is still not showing the 4250 as a supported chipset. So does anybody know what the deal is? Is this new opencl driver rubbish or does GUIminer need an update to work with the new opencl driver for the 4250? Any help with this would be great. Thanks!
|
|
|
|
|
|
|
|
|
"Bitcoin: mining our own business since 2009" -- Pieter Wuille
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
alatus
Member
Offline
Activity: 73
Merit: 10
|
|
January 07, 2012, 10:59:08 AM |
|
Could You please point me to the link, where it says, that 4250 will support opencl? (I doubt that it is possible on the hardware level...) I've tried to check the release notes, but it only says, that the opencl support is enhanced, etc. Would be interesting though!
|
|
|
|
P4man
|
|
January 07, 2012, 11:04:14 AM |
|
I'm using an HD6250 oc'd to 950mhz and am happy with the results, about 250 mh/s. I
Are you sure about this? 250 MH/s from that chip ? That would be spectacular. HD6250 is the GPU part of zacate (AMD c-30) which is a 9W chip. And thats for cpu, gpu and everything else. NOw that GPU is normally clocked at 280 MHz, so I think you mistyped or something
|
|
|
|
wogfun (OP)
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 07, 2012, 03:23:42 PM |
|
Could You please point me to the link, where it says, that 4250 will support opencl? (I doubt that it is possible on the hardware level...) I've tried to check the release notes, but it only says, that the opencl support is enhanced, etc. Would be interesting though! Yes, this link http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#2 to the AMD driver page has a new driver from 12/13/2011, for OpenCL. That's the only info I have that would lead me to believe that it's now supported, but maybe they mean what you said, enhanced?
|
|
|
|
wogfun (OP)
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 07, 2012, 03:27:57 PM |
|
I'm using an HD6250 oc'd to 950mhz and am happy with the results, about 250 mh/s. I
Are you sure about this? 250 MH/s from that chip ? That would be spectacular. HD6250 is the GPU part of zacate (AMD c-30) which is a 9W chip. And thats for cpu, gpu and everything else. NOw that GPU is normally clocked at 280 MHz, so I think you mistyped or something Hi, I'm sorry, I made a typo. I'm currently using a HD6850 to get about 250 mh/s. I'm also using these flags, -v -f 0 -w 128, without the flags it was approximately 235 mh/s. I just played with a few different sets of flags till I saw a set that gave me the best result, but in all honesty I have no clue what they actually mean, perhaps there are better settings I'm not using.
|
|
|
|
deslok
Sr. Member
Offline
Activity: 462
Merit: 250
It's all about the game, and how you play it
|
|
January 07, 2012, 05:10:41 PM |
|
the 4250 is a recycled hd 3xxx part (the graphics core is uses makes it closest to a 3450) 3xxx parts don't work with existing miners due to arcitectural differences and if you were to somehow write a miner to run on one, for that particular card you would likely be looking at something similar to mining on a midrange cpu
|
"If we don't hang together, by Heavens we shall hang separately." - Benjamin Franklin
If you found that funny or something i said useful i always appreciate spare change 1PczDQHfEj3dJgp6wN3CXPft1bGB23TzTM
|
|
|
P4man
|
|
January 07, 2012, 09:35:29 PM |
|
Hi, I'm sorry, I made a typo. I'm currently using a HD6850 to get about 250 mh/s. I'm also using these flags, -v -f 0 -w 128, without the flags it was approximately 235 mh/s. That sounds a lot more believable . If zacate could do 250MH/s, Id buy a container full of them! On a side note, 250 for a 6850 sounds lowish to me, considering the overclock. Give bitminter a try (see my signature), or perhaps cgminer.
|
|
|
|
amcsng
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 13, 2014, 11:00:24 PM |
|
Hi Wogfun
Could you be more specific as to the model of the video card, eg: XFX Radeon HD 6850 1GB 256-bit DDR5 RAM With this configuration, you were mining for litecoins a hashrate 250 Mh / s, so this correct?
Thank you very much.
|
|
|
|
|