[ANN] ManicMiner.in alt-multicoin parallel cooperative merged mining pool

[rampa]

Also I like mining on this pool but mostly don't because no matter what difficulty I set I mostly get "stratum requested work restart".

  Thi is not an error nor looses hashrate. is a normal stratum message. The pool sends new work in the same block and ask the miner to restart with the new work.

[robelneo]

Also I like mining on this pool but mostly don't because no matter what difficulty I set I mostly get "stratum requested work restart".

  Thi is not an error nor looses hashrate. is a normal stratum message. The pool sends new work in the same block and ask the miner to restart with the new work.

does this mean we have to restart the miner software again is this the reason why some of my workers are not showing hashrate I usually on my office and my miner runs automatically when my children open it ..It run on the background

[Billyboy402]

can you please Review email why Nicehash.com wont work with manicminer ?

we should rent out all ghs and let them mining on  manicminer ..... it only Scrypt: 1.49 GH/s @ 5.45 BTC/GH/Day

we can share the profits and help boost the pool

  Worked together with nicehash. It is working now. pushed 1GHS and all went fine!!! :-) (never saw it before) :-)

sweet , guys  let keepp all the hasher from nichash here

did we have to change anything , i always always getting  dead pool . i will fund my account and send it all here

the great , i try to keep all the betarig at manincminer too , i find that beta it a little better as you can risk and try smaller amounts of btc
   Hi. was testing this night (spanish night) and went OK. but....... Not sure is a good option with manic miner....


    I think it is a fantastic option with PPS pools. at MM, is fine if you pay 6/7 BTC x GHS if not, it sends the power  on batches. so you are hashing power and not hashing when the block confirms... :-(


   Dont have to change anything, but if you are going to test, do it on port 10002. No difference but this port is only DOGE. DOGE confirms very fast. so you have more chance to confirm your own hashed block......

 My test tonight with 0.06 BTC limiting power to 500MHS (wanted to last longer) paying 4.5 btc per GHS/day went fine and got 0.06 (te same. so i tested and not loosed :-) tonight i have to test the DOGE port. if you test before. tell us your result. if not, i'll tell my results....

[fitchx]

I'm very excited to use this pool. However I cant seem to connect to my workers. I have tried CG BFG and minerd all of them seem to connect to the pool but they don't seem to connect to my workers. minerd says things like

[2014-05-02 08:15:26] Stratum detected new block
[2014-05-02 08:15:26] thread 3: 4128 hashes, 5.90 khash/s
[2014-05-02 08:15:26] thread 2: 3720 hashes, 5.33 khash/s
[2014-05-02 08:15:26] thread 4: 3960 hashes, 5.66 khash/s
[2014-05-02 08:15:26] thread 1: 3996 hashes, 5.72 khash/s
[2014-05-02 08:15:26] thread 0: 4152 hashes, 5.92 khash/s
[2014-05-02 08:15:26] thread 6: 4332 hashes, 6.19 khash/s
[2014-05-02 08:15:26] thread 5: 4116 hashes, 5.88 khash/s

but never any messages that work was accepted by the pool and my workers never show as active on the site.
I have used the commands straight from the instructions page but still no dice.

Any help would be much appreciated

[DonQuijote]

Hi Rampa!
What do yo know about vertcoin and monocle?
--
Hola Rampa?
Has visto la nueva moneda merged de vertcoin? Imagino que esta no será la primera, y dado que ya tienes experiencia (La forma en la que bajaron los reject fue impresionante) quizá puedas hacer algo grande en scrypt-n también!
Suerte y enhorabuena por tu trabajo!
EDIT: https://bitcointalk.org/index.php?topic=585817.200 -- monocle

[Billyboy402]

I'm very excited to use this pool. However I cant seem to connect to my workers. I have tried CG BFG and minerd all of them seem to connect to the pool but they don't seem to connect to my workers. minerd says things like

[2014-05-02 08:15:26] Stratum detected new block
[2014-05-02 08:15:26] thread 3: 4128 hashes, 5.90 khash/s
[2014-05-02 08:15:26] thread 2: 3720 hashes, 5.33 khash/s
[2014-05-02 08:15:26] thread 4: 3960 hashes, 5.66 khash/s
[2014-05-02 08:15:26] thread 1: 3996 hashes, 5.72 khash/s
[2014-05-02 08:15:26] thread 0: 4152 hashes, 5.92 khash/s
[2014-05-02 08:15:26] thread 6: 4332 hashes, 6.19 khash/s
[2014-05-02 08:15:26] thread 5: 4116 hashes, 5.88 khash/s

but never any messages that work was accepted by the pool and my workers never show as active on the site.
I have used the commands straight from the instructions page but still no dice.

Any help would be much appreciated

Your mining with cpu . No one is going to bother helping you if you can't be bother to study and find out that cpu mining is a waste of time

[Billyboy402]

At least earning here is better then every one else . Earning can't get any worst as bur and other coin are only 1 sats

[rampa]

I'm very excited to use this pool. However I cant seem to connect to my workers. I have tried CG BFG and minerd all of them seem to connect to the pool but they don't seem to connect to my workers. minerd says things like

[2014-05-02 08:15:26] Stratum detected new block
[2014-05-02 08:15:26] thread 3: 4128 hashes, 5.90 khash/s
[2014-05-02 08:15:26] thread 2: 3720 hashes, 5.33 khash/s
[2014-05-02 08:15:26] thread 4: 3960 hashes, 5.66 khash/s
[2014-05-02 08:15:26] thread 1: 3996 hashes, 5.72 khash/s
[2014-05-02 08:15:26] thread 0: 4152 hashes, 5.92 khash/s
[2014-05-02 08:15:26] thread 6: 4332 hashes, 6.19 khash/s
[2014-05-02 08:15:26] thread 5: 4116 hashes, 5.88 khash/s

but never any messages that work was accepted by the pool and my workers never show as active on the site.
I have used the commands straight from the instructions page but still no dice.

Any help would be much appreciated

  We were testing automatic vardiff... The test was fine, but had problems with cpu and some software with GPU (bfgminer).


  At the moment all is like before (manual) this week, i am going to test some changes in my local machine with this softwares and may be next week will be again the auto vardiff.

[ckomega]

i checked Last solved block, found out:

UTC time                        Hash    Currency    Confirm    Amount
2014-05-05 02:16:27 UTC    …7f94ba5aa692a6f    LTC        28        1.00655403

why one LTC block ammount is 1, not 50?

i am confused.
please help me out.

thanks

[Flashman]

Because you are mining in a pool and not solo. In pool mining, all your pool buddies help with all the dirty work and it's just coincidence that your machine solves the block so the block reward is shared between everyone. You would not have got that block mining solo, it would have taken you 25 times longer and some other pool or solo miner with more power would probably have solved it first.

[ckomega]

Because you are mining in a pool and not solo. In pool mining, all your pool buddies help with all the dirty work and it's just coincidence that your machine solves the block so the block reward is shared between everyone. You would not have got that block mining solo, it would have taken you 25 times longer and some other pool or solo miner with more power would probably have solved it first.

yes, i know that is pool mining.
my question is why this block's amount is not 50?
i think this pool solve the block, so pool will get 50, right?
that record shows up this block is 1.

[robao]

LTB in crypsty !

https://www.cryptsy.com/markets/view/202

[jcoin]

Because you are mining in a pool and not solo. In pool mining, all your pool buddies help with all the dirty work and it's just coincidence that your machine solves the block so the block reward is shared between everyone. You would not have got that block mining solo, it would have taken you 25 times longer and some other pool or solo miner with more power would probably have solved it first.

yes, i know that is pool mining.
my question is why this block's amount is not 50?
i think this pool solve the block, so pool will get 50, right?
that record shows up this block is 1.

Because it's on P2Pool. The entire pool collectively only had enough shares for 1 LTC in the block. There's not enough hash rate to solo LTC or DOGE

[Raptor2213]

Also I like mining on this pool but mostly don't because no matter what difficulty I set I mostly get "stratum requested work restart".

  Thi is not an error nor looses hashrate. is a normal stratum message. The pool sends new work in the same block and ask the miner to restart with the new work.

Tried to start using this pool today with some new gridseeds, and I'm getting the same message.  Sometimes it will do a few submissions, but it will invariably go back to just repeating this message over and over.  Sames settings work fine on every other pool.  I'm using nwooll's BFGminer 3.99.

Edit: Got it to work by lowing the difficulty greatly (190 to 4).  190 should have been ok for 1Mhash, and it works for the other pools.  Now it's submitting, but it's lost 10% of the hashrate it should have.  I hash at just over 1k on any other pool, but I'm barely hitting 900 on this one.

[Raptor2213]

I found a new potential merged mining coin today.  Might consider checking it out:
https://bitcointalk.org/index.php?topic=353688.0

[Raptor2213]

Am I doing this wrong?

Doing what wrong?

[Raptor2213]

Am I doing this wrong?

Doing what wrong?

Having just my btc address in so I get paid in BTC?

It only converts to BTC if you manually tell it to, I think.  
You'd likely be better off with a Cryptsy account, which you can set up an auto-withdrawal to, and set up an auto-sell to convert to BTC.

[Billyboy402]

Every time I hAve have alto trade z. The offer the same price as crypts or any other exchange . But you don't have to pay trader network fees

[zarton]

it's all working fine? I didn't receive the latest transactions to my wallets, appears as not yet redeemed in the blockchains. My wallets are synchronized. No problem with other pools, I really want to back to manic miner.

[nst6563]

What happened to POT coin?  It just dropped out of existance on Manic...no news, no warning, anything...  I transferred my wallet...but does anyone know what's going on?