Certo che ho cambiato l'eseguibile ma non riesco a farlo partire i valori da specificare sono gli stessi? intendo.
Ma il link che ti ho dato l'hai aperto?
C'è una lista di esempi con i parametri già impostati, a cui dovrai aggiungere quelli della tua scheda video, il kernel si imposta col comando
-k darkcoin ecc... Viene anche specificato due volte che senza il comando -k non funziona.
Example usage - DarkCoin:
GPU_MAX_ALLOC_PERCENT=100 ./sgminer -k darkcoin -o <host>:<port> -u <user> -p <password> -I 18 -g 4 -w 128
Example usage - QubitCoin:
GPU_MAX_ALLOC_PERCENT=100 ./sgminer -k qubitcoin -o <host>:<port> -u <user> -p <password> -I 16 -g 4 -w 128
Example usage - Quark and clones:
GPU_MAX_ALLOC_PERCENT=100 ./sgminer -k quarkcoin -o <host>:<port> -u <user> -p <password> -I 16 -g 4 -w 64
Without given -k argument value it defaults to scrypt kernel! If you have problems, read the
DarkCoin thread from page 100, it contains a lot of information and solutions to common problems.
Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.
Common problems and solutions:
- Error -11: Building Program (clBuildProgram) - execute miner from the directory where "kernel" directory is present
- HW errors - select correct mining algorithm with -k option
- still does not work - update Catalyst drivers to version 13.12
Ci sono anche dei riferimenti sulle performance su R9 290
Performance (on R9 290):
- DRK ~2.5 MH/s
- Q2C ~5 MH/s
- QRK ~2.1 MH/s
- MYR ~10 MH/s
- FC ~145 MH/s
- INK ~45 MH/s
- ANI ~1.8 MH/s
- GRS ~5.5 MH/s
- SIC ~4.5 MH/s
- TWE ~11 MH/s
- MARU ~ 1.8 MH/s
Per quanto riguarda --api-listen --api-network --api-allow W:192.168.1/24 non so risponderti.