CoiniumServ - open source & high performance pooled mining server software

[artbatista]

I got it set up with MPOS yesterday. Other than the hash rate being way off, all seems good.

I have this in a VM in Hyper-v under win2012serv-r2, running kubuntu 14.04

Take a look:

btcpool.artbatista.com


Cheers


Art

[artbatista]

art, added a configurable timeout option - https://github.com/CoiniumServ/CoiniumServ/pull/437 - https://github.com/CoiniumServ/CoiniumServ/archive/develop.zip
relative commit: https://github.com/raistlinthewiz/CoiniumServ/commit/4e7b91cb5e38ecda0a7292ec859bdc570d696781

i've set it to 5 seconds by default (where it was before 1 second), can you test it to see if it fixes your problems?

configuration option: https://github.com/raistlinthewiz/CoiniumServ/commit/4e7b91cb5e38ecda0a7292ec859bdc570d696781

I'll sync the repo and compile it when get a chance.

Art

[artbatista]

Small display bug.

Was watching the coinium interface when a new job was broadcasted because a block was just found, 32016

However the block that has just been found is 32015, 32016 is the next block that's being worked on.

Anyway, it's minor, but coinium should say that the block that was found was the previous block, not the next block.

Art

[bonesoul]

i installed this on Ubuntu 14 but have no clue how to get CoiniumServ.exe running.

run with;

Code:

chmod +x CoiniumServ.exe
./CoiniumServ.exe

or

Code:

chmod +x CoiniumServ.exe
mono CoiniumServ.exe

art, will be checking the block display bug.
still didn't have time to fix the hashrate bug.

[artbatista]

i installed this on Ubuntu 14 but have no clue how to get CoiniumServ.exe running.

run with;

Code:

chmod +x CoiniumServ.exe
./CoiniumServ.exe

or

Code:

chmod +x CoiniumServ.exe
mono CoiniumServ.exe

art, will be checking the block display bug.
still didn't have time to fix the hashrate bug.

In Ubuntu 14.04, even after I chmod +x, CoiniumServ.exe will not run, CoiniumServGUI.exe on the other hand, works right out the gate, no chmod needed. I just copied the entire bin + subdirectories to my home directory in ubuntu and clicked on CoiniumServGUI.exe to run.

And yes. I did verify they were both marked as executables.

One other thing, in the GUI versions, could you make the console view the default, instead of the web view? I have the web interface disabled now to use with MPOS, so it just a blank screen looking at me until I click on the console tab.


Art

[artbatista]

art, will be checking the block display bug.
still didn't have time to fix the hashrate bug.

Write it all down, I am sure you'll get to them eventually.

 


Art

[bonesoul]

In Ubuntu 14.04, even after I chmod +x, CoiniumServ.exe will not run, CoiniumServGUI.exe on the other hand, works right out the gate, no chmod needed. I just copied the entire bin + subdirectories to my home directory in ubuntu and clicked on CoiniumServGUI.exe to run.

do you get an error when you try to do so?

and art all issues are tracked on github - https://github.com/CoiniumServ/CoiniumServ/issues

and fixed both issues: https://github.com/CoiniumServ/CoiniumServ/pull/439

[artbatista]

In Ubuntu 14.04, even after I chmod +x, CoiniumServ.exe will not run, CoiniumServGUI.exe on the other hand, works right out the gate, no chmod needed. I just copied the entire bin + subdirectories to my home directory in ubuntu and clicked on CoiniumServGUI.exe to run.

do you get an error when you try to do so?

and art all issues are tracked on github - https://github.com/CoiniumServ/CoiniumServ/issues

and fixed both issues: https://github.com/CoiniumServ/CoiniumServ/pull/439

Will do

[HunterS]

i installed this on Ubuntu 14 but have no clue how to get CoiniumServ.exe running.

run with;

Code:

chmod +x CoiniumServ.exe
./CoiniumServ.exe

or

Code:

chmod +x CoiniumServ.exe
mono CoiniumServ.exe

art, will be checking the block display bug.
still didn't have time to fix the hashrate bug.

cheers mate. mono CoiniumSer.exe worked a treat

[HunterS]

i get this error when server starts-[Error] [HttpServer] [global] Need elevated privileges to listen on port 80, try running as root - Address already in use

[artbatista]

i get this error when server starts-[Error] [HttpServer] [global] Need elevated privileges to listen on port 80, try running as root - Address already in use

If you already have a web server running, you either need to disable the server, or disable the coinium built in web server or change coinium port so they won't clash.

Art

[HunterS]

i get this error when server starts-[Error] [HttpServer] [global] Need elevated privileges to listen on port 80, try running as root - Address already in use

If you already have a web server running, you either need to disable the server, or disable the coinium built in web server or change coinium port so they won't clash.

Art

yep it was apache i fixed that.i get web front up now but my pools arent showing up say i have zero configuted but i done all the cofig right i thought

[artbatista]

i get this error when server starts-[Error] [HttpServer] [global] Need elevated privileges to listen on port 80, try running as root - Address already in use

If you already have a web server running, you either need to disable the server, or disable the coinium built in web server or change coinium port so they won't clash.

Art

yep it was apache i fixed that.i get web front up now but my pools arent showing up say i have zero configuted but i done all the cofig right i thought

Did the change the "enabled" line from "false" to "true" at the very top of the "coinname.json" file in the pools sub directory?

Code:

{
    # detailed sample config file for pool which explicility sets all settings.

    "enabled": true,    

    # -------------------------------
    # Coin configuration
    # -------------------------------

[HunterS]

checking now.also when it says "cp advanced-example.json your-pool.json" do you replace "your-pool" with your coin name or leave as is

[artbatista]

checking now.also when it says "cp advanced-example.json your-pool.json" do you replace "your-pool" with your coin name or leave as is

yes, for each pool , you create a copy naming it, i.e. For bitcoin:

bitcoin.json

Then edit the file. It's very well commented.

Art

[HunterS]

ok i got it run in terminal window.everything looks good but i cant open web page

[HunterS]

Everything looks good.But cant open web page for pool
 
            .__       .__
  ____  ____ |__| ____ |__|__ __  _____   ______ ______________  __
_/ ___\/  _ \|  |/    \|  |  |  \/     \ /  ___// __ \_  __ \  \/ /
\  \__(  <_> )  |   |  \  |  |  /  Y Y  \\___ \\  ___/|  | \/\   /
 \___  >____/|__|___|  /__|____/|__|_|  /____  >\___  >__|    \_/
     \/              \/               \/     \/     \/

Copyright (C) 2013 - 2014, Coinium project - http://www.coinium.org

CoiniumServ comes with ABSOLUTELY NO WARRANTY.

You can contribute the development of the project by donating;
 BTC : 18qqrtR4xHujLKf9oqiCsjmwmH5vGpch4D
 LTC : LMXfRb3w8cMUBfqZb6RUkFTPaT6vbRozPa
 DOGE: DM8FW8REMHj3P4xtcMWDn33ccjikCWJnQr
 RDD : Rb9kcLs96VDHTmiXVjcWC2RBsfCJ73UQyr

02:15:06 [Information] [Program] [global] CoiniumServ Piri Reis 0.1.5.1767 warming-up..
02:15:06 [Information] [PlatformManager] [global] Running over Mono 3.2.8 (Debian 3.2.8+dfsg-4ubuntu1), framework: 4.5 (v4.0.30319.17020).
02:15:06 [Debug] [ConfigManager] [global] Discovering enabled pool configs..
02:15:06 [Information] [PoolConfig] [Xtracoin] Disabled payments processor as it can not be enabled when MPOS mode is on
02:15:06 [Information] [ConfigManager] [global] Discovered a total of 1 enabled pool configurations: [Xtracoin]
02:15:06 [Debug] [Pool] [Xtracoin] Generated cryptographically random instance Id: 3007228616
02:15:07 [Information] [NetworkInfo] [Xtracoin] symbol: CX algorithm: sha256 version: v1.0.0.1-xtra protocol: 60006 wallet: 60000 network difficulty: 44868.96041621 block difficulty: 44868.96 network hashrate: 1.78 TH/s network: mainnet peers: 14 blocks: 100891 errors: none
02:15:07 [Information] [MySqlProvider] [Xtracoin] Mysql storage initialized: 127.0.0.1:3306, database: xtracoin.
02:15:07 [Information] [BanManager] [Xtracoin] No expired bans found to be cleared [remaining bans: 0].
02:15:07 [Information] [JobManager] [Xtracoin] Broadcasted new job 0x1 to 0 subscribers as no new blocks found for last 55 seconds
02:15:07 [Information] [StratumServer] [Xtracoin] Stratum server listening on 178.62.138.128:3333
02:15:07 [Debug] [StatisticsManager] [global] Recached statistics - took 0.236 seconds
02:15:08 [Information] [HttpServer] [global] Web-server listening on: http://178.62.138.128/
02:16:02 [Information] [JobManager] [Xtracoin] Broadcasted new job 0x2 to 0 subscribers as no new blocks found for last 55 seconds
02:16:07 [Debug] [StatisticsManager] [global] Recached statistics - took 0.011 seconds

[artbatista]

Everything looks good.But cant open web page for pool
 
            .__       .__
  ____  ____ |__| ____ |__|__ __  _____   ______ ______________  __
_/ ___\/  _ \|  |/    \|  |  |  \/     \ /  ___// __ \_  __ \  \/ /
\  \__(  <_> )  |   |  \  |  |  /  Y Y  \\___ \\  ___/|  | \/\   /
 \___  >____/|__|___|  /__|____/|__|_|  /____  >\___  >__|    \_/
     \/              \/               \/     \/     \/

Copyright (C) 2013 - 2014, Coinium project - http://www.coinium.org

CoiniumServ comes with ABSOLUTELY NO WARRANTY.

You can contribute the development of the project by donating;
 BTC : 18qqrtR4xHujLKf9oqiCsjmwmH5vGpch4D
 LTC : LMXfRb3w8cMUBfqZb6RUkFTPaT6vbRozPa
 DOGE: DM8FW8REMHj3P4xtcMWDn33ccjikCWJnQr
 RDD : Rb9kcLs96VDHTmiXVjcWC2RBsfCJ73UQyr

02:15:06 [Information] [Program] [global] CoiniumServ Piri Reis 0.1.5.1767 warming-up..
02:15:06 [Information] [PlatformManager] [global] Running over Mono 3.2.8 (Debian 3.2.8+dfsg-4ubuntu1), framework: 4.5 (v4.0.30319.17020).
02:15:06 [Debug] [ConfigManager] [global] Discovering enabled pool configs..
02:15:06 [Information] [PoolConfig] [Xtracoin] Disabled payments processor as it can not be enabled when MPOS mode is on
02:15:06 [Information] [ConfigManager] [global] Discovered a total of 1 enabled pool configurations: [Xtracoin]
02:15:06 [Debug] [Pool] [Xtracoin] Generated cryptographically random instance Id: 3007228616
02:15:07 [Information] [NetworkInfo] [Xtracoin] symbol: CX algorithm: sha256 version: v1.0.0.1-xtra protocol: 60006 wallet: 60000 network difficulty: 44868.96041621 block difficulty: 44868.96 network hashrate: 1.78 TH/s network: mainnet peers: 14 blocks: 100891 errors: none
02:15:07 [Information] [MySqlProvider] [Xtracoin] Mysql storage initialized: 127.0.0.1:3306, database: xtracoin.
02:15:07 [Information] [BanManager] [Xtracoin] No expired bans found to be cleared [remaining bans: 0].
02:15:07 [Information] [JobManager] [Xtracoin] Broadcasted new job 0x1 to 0 subscribers as no new blocks found for last 55 seconds
02:15:07 [Information] [StratumServer] [Xtracoin] Stratum server listening on 178.62.138.128:3333
02:15:07 [Debug] [StatisticsManager] [global] Recached statistics - took 0.236 seconds
02:15:08 [Information] [HttpServer] [global] Web-server listening on: http://178.62.138.128/
02:16:02 [Information] [JobManager] [Xtracoin] Broadcasted new job 0x2 to 0 subscribers as no new blocks found for last 55 seconds
02:16:07 [Debug] [StatisticsManager] [global] Recached statistics - took 0.011 seconds

If you are running the Alpha5, it's very picky about what interface it binds to. Try 127.0.0.1 and localhost.

The develop branch fixes that.

If it still does not work paste the config.json here.

Exactly what error do you get on the browser when you try to load up the page?

Art

[HunterS]

    # -------------------------------
    # Stack Configuration
    # -------------------------------

    # name:  name of the pool stack.

    "stack": {
        "name": "CoiniumServ.com"
    },

    # -------------------------------
    # Statistics Configuration
    # -------------------------------

    # updateInterval: interval for recaching statistics.
    # hashrateWindow: how many seconds worth of shares should be gathered to generate hashrate.

    "statistics": {
        "updateInterval": 60,
        "hashrateWindow": 300
    },

    # -------------------------------
    # Website Configuration
    # -------------------------------

    # enabled: set this true to enable frontend.
    # bind: interface to bind webserver, leave empty to listen on all available interfaces.
    # port: port to listen for http connections.
    # backend:
    # enabled: set this true to enable admin backend.
    # password: password for enabling administrator

        "website": {
                "enabled": true,
                "bind": "",
                "port": 80,
        "backend" : {
            "metrics": {
                "enabled": false
            }
        }
        },

    # -------------------------------
    # Logging Configuration
    # -------------------------------

    # root: relative path of logs.
    # targets: log targets.

    # target:
    # enabled: is the log target enabled?
    # type: console, file or packet.
    # filename: filename of the log file.
    # rolling: set this true to get a seperate log file for every day.
    # level: minimum log level.

    # logging configuration
        "logging": {
                "root": "logs",
                "targets": [
                        {
                                "enabled": true,
                                "type": "console",
                                "level": "debug"
                        },
                        {
                                "enabled": true,
                                "type": "file",
                                "filename": "server.log",
                                "rolling": false,
                                "level": "information"
                        },
                        {
                                "enabled": true,
                                "type": "file",
                                "filename": "debug.log",
                                "rolling": false,
                                "level": "verbose"
                        },
                        {
                                "enabled": true,
                                "type": "packet",
                                "filename": "packet.log",
                                "rolling": false,
                                "level": "verbose"
                        }
        ]
        }
}

[artbatista]

02:15:06 [Debug] [Pool] [Xtracoin] Generated cryptographically random instance Id: 3007228616

I noticed you are running xtracoin. Isn't that a POS/POW hybrid coin?

Anyway, coinium does not work with POS coins yet. It looks like it does, but blocks never get submitted because the daemon  rejects them.

Art