[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[girino]

Hello All,

I have recently announced in the portuguese forums, as a "beta test" and am now annoucing for everyone my improvements made on X11 GPU mining. This was tested on r9 280x and yielded 40% speed improvement, minign at 3000Kh/s with "--gpu-engine 1100".

Mines DARKCOIN or any other X11 coin.

WARNING: This is not a free (as in beer) version. This version of the miner mines 2% of the time as a donation fee to the developer. As the improvement in hashrate is close to 50%, i don't think you should mind donating 2% of your time to the developer who made it possible.

Please test it and post results here.

Those versions where tested on ubuntu 12.04 and windows 7.

Download Links:
Dropbox:
https://www.dropbox.com/sh/zhfbr8xh6zw0gi0/AADFS3oggg7WDX8WxB4XA6wEa?dl=0
Mega:
https://mega.co.nz/#F!AZJCkbaT!UDu9jWinFweaD4JcQgiQxQ

Good mining for all.

EDIT: Built a new version with mingw instead of cygwin, and the temperatures and fan speed should work now.

EDIT 2: Some of you asked for it, so I am now releasing the X13 version of my miner. It is slightly faster than lazybear's, and has only a 1% fee. Download it here:
Binaries:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ
Source:
https://github.com/girino/x13-sgminer

EDIT 3: Thanks to djm34, it now works on the newer 14.6 drivers. Links:
- Linux version (BAMT): dropbox or mega.co.nz
- Windows version: dropbox or mega.co.nz

EDIT 4
Updated binaries to use wolf's leaked kernel. Now you get the speed of wolf's kernel with the stability and usability of my miner. Downloads in the same places.
This version is up do 40% faster than my previous version (50% faster than sgminer v5), depending on the GPU. For GPUs not supported by Wolf's binaries, the speed is still the same (10% faster than sgminer v5).
Enjoy...
Dropbox:
https://www.dropbox.com/sh/zhfbr8xh6zw0gi0/AADFS3oggg7WDX8WxB4XA6wEa?dl=0
Mega:
https://mega.co.nz/#F!AZJCkbaT!UDu9jWinFweaD4JcQgiQxQ

[1714064936]

1714064936

[1714064936]

1714064936

[djm34]

  here we go again.
Solo not possible I guess ?

[girino]

here we go again.
Solo not possible I guess ?

I guess it is possible, but never tested.

[djm34]

here we go again.
Solo not possible I guess ?

I guess it is possible, but never tested.

But how will it work regarding the fee ? I mean say I mine a new X11 coin (there is one or two everyday...), how will it work ?

[girino]

here we go again.
Solo not possible I guess ?

I guess it is possible, but never tested.

But how will it work regarding the fee ? I mean say I mine a new X11 coin (there is one or two everyday...), how will it work ?

It connects to another pool (a random p2pool) when mining the fee. If you ask the miner to list the connected pools it will list 2 pools, one with "quota" 2% and another with quota 98%.

[anva]

How do i know there is no virus or file transfers of wallets if i use this miner ?  

[OmarGsPools]

Could you provide the source code please?

[Luke-Jr]

You are hereby notified that you are infringing on my copyright in this distribution.
Under the license terms granted to you, you have 30 days to cure your non-compliance.
You may review the license here: http://www.gnu.org/copyleft/gpl.html
If you do not follow the terms of the license within 30 days, I will need to take legal action against you.

Thank you for your compliance,

Luke

P.S. Please note that I have no objection to your fee. You are free to make a profit, provided you abide by the license terms.

[girino]

How do i know there is no virus or file transfers of wallets if i use this miner ?  

You will know as soon as i release the code.

[girino]

Could you provide the source code please?

I am preparing the code for publishing. Will be ready soon.

[jimlite]

I am having a big issue. This miner does not display either my GPU temp or fan speed, they are blank.
Even Trixx is not giving me accurate info on my Asus 280x.  I can't run software if I have no idea
what my gpu temps are.  It seems like this miner lowers my fan speeds, but I have no idea what it
does to heat.

[anva]

Could you provide the source code please?

I am preparing the code for publishing. Will be ready soon.

waiting for others to confirm that everything is fine after the code is published. I hope you fix the temperature not reported issue too.

[girino]

I am having a big issue. This miner does not display either my GPU temp or fan speed, they are blank.
Even Trixx is not giving me accurate info on my Asus 280x.  I can't run software if I have no idea
what my gpu temps are.  It seems like this miner lowers my fan speeds, but I have no idea what it
does to heat.

That's an windows only issue. Works fine on linux. I am looking into this problem right now.

[Ralph0603]

Ive tried it.

Results:
290 from 2,4 to 3,5
http://i.gyazo.com/dcd12813efef82360d32e26b6c74b871.png
270x from 1,37 to 1,80

GREAT!

[mobile2004]

Code:

/opt/x11-sgminer/sgminer: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by /opt/x11-sgminer/sgminer) /opt/x11-sgminer/sgminer: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by /opt/x11-sgminer/sgminer)

latest PiMP

[Amph]

i'm waiting for the release fee free, on the official thread

[hiddensphinx]

sounds promising looking forward to source code to check if there are no nasties inside

[webbson]

Only increase from 6.2MH/s to 6.9MH/s with my 3x 280x.
No temp/fan speed showing.
The 2% pool fucks up listing of pool names in pool config.

Win 7, Catalyst 13.11

[qiufeng]

Code:

/opt/x11-sgminer/sgminer: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by /opt/x11-sgminer/sgminer) /opt/x11-sgminer/sgminer: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by /opt/x11-sgminer/sgminer)

latest PiMP

you need updata GLIBC

[mobile2004]

you need updata GLIBC

i see.
but how?