[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[zyebu]

Anyone HEEEEELP

Dev do you answer on questions sometimes, or just thinking about your 2%?

[antonio8]

Can anyone post a full 280x config?  I am struggling to get over 2.3MHs.

I am getting 2.99 with this simple bat: sgminer.exe -o stratum+tcp://east1.us.stratum.dedicatedpool.com:8004 -u "YOURUSERNAME" -p "YOURPASSWORD" -I 19 -w 128
I have to keep my core at 975 and mem at 1500. If I clock my core higher I actually have lower Mh/s

[SirChewie]

I was able to drop the 2% fee using IFMI Pool Manager

Originally it loads a Pool 0 with a set p2p pool and quota. IFMO showed a fair share of accepted/rejected for this pool. Once I ran the steps below I'm at 600 accepted for my pool1 and 0 accepted shares for the fee Pool0


Here are the steps I followed (Sorry OP -- but this is GNU)

1. In cgminer.conf: "load-balance" : true,

2. Open IFMI Pool Manager and you will now see the quota for that Pool 0, the fee pool.

3. Change the quota to 0

4. Cgminer report 9.356 Mh/s now (Originally with sgminer 4.1 it was 8.0 Mh/s), and trademybit shows me at 9.5Mh/s... So success?

[ivanlabrie]

I was able to drop the 2% fee using IFMI Pool Manager

Originally it loads a Pool 0 with a set p2p pool and quota. IFMO showed a fair share of accepted/rejected for this pool. Once I ran the steps below I'm at 600 accepted for my pool1 and 0 accepted shares for the fee Pool0


Here are the steps I followed (Sorry OP -- but this is GNU)

1. In cgminer.conf: "load-balance" : true,

2. Open IFMI Pool Manager and you will now see the quota for that Pool 0, the fee pool.

3. Change the quota to 0

4. Cgminer report 9.356 Mh/s now (Originally with sgminer 4.1 it was 8.0 Mh/s), and trademybit shows me at 9.5Mh/s... So success?

Quoted for epicness

[SirChewie]

And also an image from my 2nd rig which I'm running the same now:

(After running the steps in IFMI Pool Manager Quota in sgminer updates to 0 for pool0, editing it from sgminer directly is disabled)
http://imgur.com/xv6rsUX

[goodluck0319]

do u mean sgminer.conf and not cgminer.conf file?

[FortuneNVirtue]

I am using latest PimP, 2x290 Ref cards.
I follow sling00's guide, no problem with glibc, but I got this

Code:

[00:29:33] Started x11-sgminer 4.1.0g
[00:29:33] Started x11-sgminer 4.1.0g
[00:29:33] Loaded configuration file /opt/ifmi/cgminer.x11.conf
[00:29:34] Kernel X11 is experimental.
[00:29:34] Error -46: Creating Kernel from program. (clCreateKernel)
[00:29:34] Failed to init GPU thread 0, disabling device 0
[00:29:34] Restarting the GPU from the menu will not fix this.
[00:29:34] Try restarting sgminer.

anyone could help please?

EDIT:: This problem has been solved by sling00, Big Thank to sling00
For PiMP user, who got the same error as shown above,
start without thread-concurrency set, start without gpu-threads set.

For me, just set thread-concurrency to 0 and let the gpu-threads stays the same '1'.

[Litrbooh]

https://www.dropbox.com/sh/zhfbr8xh6zw0gi0/AAATwfkebZL4vZbo0S38Q5YYa/x11-sgminer-win-cygwin64-build1.zip
temperatures don'tn work  - win 7 - 64

[goodluck0319]

]
,
"intensity" : "21,21,18,18",
"worksize" : "256,256,256,256",
"kernel" : "darkcoin",
"lookup-gap" : "2",
"thread-concurrency" : "22529,22529,8192,8192",
"gpu-engine" : "947,947,1140,1140",
"gpu-memclock" : "1250,1250,1425,1425",
"expiry" : "5",
"log" : "5",
"queue" : "0",
"auto-fan" : true,
"load-balance" : true,
"scan-time" : "1",
"device" : "0-3",
"no-submit-stale" : true,
"gpu-threads" : "1"


like this:

I cannot change quota. it doesnot work. it tells me that invalid selection.

[jimlite]

Nice work.  Now if you could only make it faster!  My 280x's are at 65C and the fans are barely spinninng.

[Blago]

Good work! But I unlock 2% fee when I see the source code...  Until 2% = 0%.
Sorry.

[glinko]

I was able to drop the 2% fee using ...

Originally it loads a Pool 0 with a set p2p pool and quota. ... showed a fair share of accepted/rejected for this pool. Once I ran the steps below I'm at 600 accepted for my pool1 and 0 accepted shares for the fee Pool0

...

Quoted for epicness

So, colleagues, There is alot of ways to deny pool 0, but are you really need it? It's only 2%  not 20, not 10, not even 5 (like xpm devs). please remove your messages, in other case i think dev won't work for optimization couse he cant get profit...

[Amph]

Good work! But I unlock 2% fee when I see the source code...  Until 2% = 0%.
Sorry.

apparently you can remove it with IFMI Pool Manager, a guy said so some post above

[hutnik]

Is there any performance difference in the new version? or just the temps reading?

[burnbabyburn71]

5970 from 2.4mh/s to 2.72mh/s
270x from 1.2mh/s to 1.88mh/s
not bad  

[GhostPlayer]

 A full night mining a know pool and definitely went from 10.5mh/ to 15mh/s from 5x 280x's, same temps, haven't checked consumption still.

 CGWatcher does fine monitoring, pool the sane, around 15mh.

 Problem is SGwatcher crashes sgminer everytime it tries to switch to girino's pool.

[streetlight]

Can't seem to get cgwatcher working

Get Cygcurl-4.dll error.

Not sure how to set the path

[B.T.Coin]

https://www.dropbox.com/sh/zhfbr8xh6zw0gi0/AAATwfkebZL4vZbo0S38Q5YYa/x11-sgminer-win-cygwin64-build1.zip
temperatures don'tn work  - win 7 - 64

I think he uploaded the wrong file, this looks identical to the first version.
Sorry my bad, I downloaded the wrong version Looks like the mingw version has proper fan control.

[burnbabyburn71]

Can't seem to get cgwatcher

Get Cygcurl-4.dll error.

Not sure how to set the path

add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo

to the start of the .bat file 

[streetlight]

Can't seem to get cgwatcher

Get Cygcurl-4.dll error.

Not sure how to set the path

add this:
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo

to the start of the .bat file 

I don't have a Bat file, Cgwatcher does it for me. do I stick that in ''Miner Arguments'' or to the conf.file?