[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[tarzanbigcity]

you misspelled quota in your config.

"quota" : "9999;stratum+tcp://west01.us.trademybit.com:4440",  not qutoa

[goodluck0319]

{
"pools" : [
        {
      "poolname" : "Donate"
        },
        {      
               "poolname" : "MyPoolName",
                "quota" : "9999;stratum+tcp://east01.us.trademybit.com:4440",
                "user" : "xxxxxxxx",
                "pass" : "xxxxxx"
        },
        {
               "poolname" : "MyPoolName",
                "qutoa" : "9999;stratum+tcp://west01.us.trademybit.com:4440",
                "user" : "sdfjsdklafaf",
                "pass" : "xxxxxxxx"
        }
]
,
"intensity" : "18,18,18,18",
"kernel" : "darkcoin",
"worksize" : "128,128,256,256",
"failover-only" : true,
"lookup-gap" : "2",
"thread-concurrency" : "20482,20482,8193,8193",
"gpu-engine" : "947,1030,1130,1130",
"gpu-memclock" : "1250,1250,1425,1425",
"expiry" : "5",
"log" : "5",
"queue" : "0",
"auto-fan" : true,
"scan-time" : "1",
"device" : "0-3",
"no-submit-stale" : true,
"gpu-powertune": "20,20,0,0",
"gpu-threads" : "2,2,1,1"
}

is this correct?

lookup-gap and thread-concurrency changes nothing for me.

Here`s my settings:

Code:

...
"intensity" : "19",
"worksize" : "128",

"gpu-engine" : "1170,1170,1170,1080",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",

"auto-fan" : true,
"gpu-fan" : "50-80,50-80,50-80,82",
"temp-target" : "80",
"temp-overheat" : "85",
"temp-cutoff" : "90",

"kernel" : "darkcoin",
}

I think I have different gpu then u did. I got 2 x 290 non x ( one is non ref and 2nd is ref) and 2 x 270x ( both are PC+).

[tex81]

Some of my friends doesn`t understand internal menu.

"Pool" - "Change management strategy" to 0 (Failover) - is pressing "P", "C", 0 (zero) and Enter.
And once again Enter to see home screen.

[Eastwind]

Not sure why, but this keeps freezing my miner. Using r9 270's, windows 7, any ideas on what settings I should be using?

Would my old settings for darkcoin be ok? Those worked well, just at a lower hash...

You just need to down clock your GPU. The new miner make more efficient use of the GPU. Even though the power consumption increases just a little, the GPU is more stressed than older miner.

My core and memory clock were maxed 1050/1500.... How much should I throttle that back?

I only use 7970. I reduce the core by 10-20 MHz.

[count_cyrpto]

Not sure why, but this keeps freezing my miner. Using r9 270's, windows 7, any ideas on what settings I should be using?

Would my old settings for darkcoin be ok? Those worked well, just at a lower hash...

You just need to down clock your GPU. The new miner make more efficient use of the GPU. Even though the power consumption increases just a little, the GPU is more stressed than older miner.

My core and memory clock were maxed 1050/1500.... How much should I throttle that back?

I only use 7970. I reduce the core by 10-20 MHz.

Thanks.... I'll give that a try.

[tex81]

I think I have different gpu then u did. I got 2 x 290 non x ( one is non ref and 2nd is ref) and 2 x 270x ( both are PC+).

I mean that some parameters are not necessary here (changes nothing).

[han1122]

Can I use this for JackpotCoin ?

[Kire]

Can someone tell me how to make the sgminer.conf file and where to add this file, and how to start without this 2%
Thanks

[taaku]

not able to use this with cgwatcher..can anyone tell me how to set the paths in cgwatcher

[Dripac]

Go to settings/profiles tab in cgwatcher and  go to manage profiles/miner path than u browso to your bat file ...

[innergy]

...

Disabling donate pool: just set "Pool" - "Change management strategy" to 0 (Failover). Works fine for me.

Works for me too. Thanks!

[Dripac]

Which card is that and what clock you use ?

[the_g00se]

same problem not showing the temperature on my card can anyoane give a a link whit a good compiled miner for darkcoin?

https://bitcointalk.org/index.php?topic=475795.0

i had managed to compile it on bamt no problem but the temp still not showing up.

Can you explain how you compiled on BAMT? I am running BAMT 1.6 and 1.6.2.  I am unable to get this to run on any of my rigs.


Thanks!

[Amph]

Which card is that and what clock you use ?

seems a 290, this miner should do 40-50% more hash, 290 was at 2.7mh/s before

[wmtomlinso]

Some of my friends doesn`t understand internal menu.

"Pool" - "Change management strategy" to 0 (Failover) - is pressing "P", "C", 0 (zero) and Enter.
And once again Enter to see home screen.

THIS WORKS - SIMPLE way to disable donation

You can disable the donation simply by changing the pool management strategy to failover.  He removed the menu item for failover, but it still works.  I just assumed it wouldn't work since the menu item was gone and didn't try it.

[kopam]

I would not mind to donate 2% IF everything works BUT tbh right now this is just one big scam, i left 1 of my miners to test that shit and for 5 hours it mined 90% of the time in the "donation pool". So fuck off ...

Now i will try the failover strategy, if that works - great. If not, lets hope some a bit more honest developer will take off what this guy did and do something nice.

[ekoice]

Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...

[innergy]

Which card is that and what clock you use ?

3x 290, 1030/1300

Can we implement this P>C>0 sequence in the starting .bat file?

[Dripac]

https://i.imgur.com/pAJk6CQ.png

Im doing this in the right mode ?

Using PIMP, latest version. Cards: 3x 280x Gigabyte rev2
any suggestions are appreciated.
gonna do this for my other rigs...

My god put that card on lover voltage or set GPU on 1180/1500 for better hash rate if u cant set lover voltage on cards
This is my 2x280x cards , 1st card on water and 2nd card Asus DC2T 1150/1500 1175mv
http://www.dodaj.rs/f/1m/11L/2f08ayeH/2x280-drk.jpg

[ekoice]

dont have any problems with energy bills sir thanks for your suggestion gonna report the result asap.