[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[renegadepcsolutions]

https://github.com/girino?tab=repositories


5 days later, still don't see a source in your repository on GIT...

Wake up.

[dmpotter]

downloads seem to be broke

[Cryptoinn]

My two Tri-X 290X OC to 1150/1250(they both cant hadle 1500 memory) get 4050kh each, total 8-8.1mh
Settings: W128 I 21 TC 32536
AMazing! 

[lasybear]

HI everyone!

Could you check my version of sgminer?



Thanks.

[JcOaCrO]

Can anyone please reupload download link is dead. Thanks

Also if anyone can build a windows binary of lasybear's miner and test it would be great

[Cryptoinn]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

## Mod x11 (separate kernels)

0. Use "kernel" : "x11mod" in config file or -k x11mod via command line.
1. Do not use thread concurrency higher than 15.
2. In case of instability please set a little bit lower engine frequency than a original sgminer.
3. Tested only on Ubuntu x64 and BAMT..
4. Tested only on R9 280x and R9 270x.

My experience:
MSI R9 280x 3.4 MH/s

"intensity" : "15",
"vector" : "1",
"worksize" : "256",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1200",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.200",
"gpu-threads" : "2"

Rig
5 x Sapphire R9 270x Vapor-X 10.43 MH/s (~2.08 MH/s per card)
"intensity" : "15",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1150",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.150,1.150,1.150,1.150,1.150",
"gpu-threads" : "2"

Open sourced == NO HIDDEN MININGS )

If you satisfied, please donate

BTC: 1LykvDuT7PCJ2xgT513RsyWQSZ9pbrDFa6
MRO: 47mfp5AVx6R1Gdc6qPZeV2Ceq1Aw3HFXLRHgjW2pHszVRLzg5pe4tNPMz1NSmAYADGFmUDthoLzyBDB GEz7AoFya9QZKWcu
LTC: LYpe5amuVYdSKmi3D5HCoKMeBd6yty8xVi

Thanks.

Where i can find compiled version?

[lasybear]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

Where i can find compiled version?

Sorry buddy, I've compiled version only for Ubuntu x64 14.04 and for BAMT.
Do you need it?

[lasybear]

Can anyone please reupload download link is dead. Thanks

Pls check.

[JcOaCrO]

Can anyone please reupload download link is dead. Thanks

Pls check.

I needed the link for the miner with 2% donation because it's already built for windows.
I would like to try yours , hope somebody who has experience can build your version.
 

[Amph]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

## Mod x11 (separate kernels)

0. Use "kernel" : "x11mod" in config file or -k x11mod via command line.
1. Do not use thread concurrency higher than 15.
2. In case of instability please set a little bit lower engine frequency than a original sgminer.
3. Tested only on Ubuntu x64 and BAMT..
4. Tested only on R9 280x and R9 270x.

My experience:
MSI R9 280x 3.4 MH/s

"intensity" : "15",
"vector" : "1",
"worksize" : "256",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1200",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.200",
"gpu-threads" : "2"

Rig
5 x Sapphire R9 270x Vapor-X 10.43 MH/s (~2.08 MH/s per card)
"intensity" : "15",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1150",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.150,1.150,1.150,1.150,1.150",
"gpu-threads" : "2"

Open sourced == NO HIDDEN MININGS )

If you satisfied, please donate

BTC: 1LykvDuT7PCJ2xgT513RsyWQSZ9pbrDFa6
MRO: 47mfp5AVx6R1Gdc6qPZeV2Ceq1Aw3HFXLRHgjW2pHszVRLzg5pe4tNPMz1NSmAYADGFmUDthoLzyBDB GEz7AoFya9QZKWcu
LTC: LYpe5amuVYdSKmi3D5HCoKMeBd6yty8xVi

Thanks.

is this a mod of the "2% fee" version?

[lasybear]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

## Mod x11 (separate kernels)

is this a mod of the "2% fee" version?

No (I haven't sources of  "2% fee" version).
Maybe algo is same.
One main difference -- my version is free.

[Remember remember the 5th of November]

LOL !  

I've got more than a reason to think that this is a scam, the first is that the GPU code is not inside the miner program but inside the .cl file, so I don't think you could be able to optimize anything only with the miner, but why don't give you a chance?

I've tried to download the linux version without luck, would you reupload it please?
Also email will be fine jeky (at) [Suspicious link removed]

EDIT:
I've read all the thread and discovered that probably the modified miner also includes a different .cl file.
So probably the author could be considered UNFAIR but not a scammer !
If someone want to send me the linux version I would be happy to test it. Thanks

EDIT2:
Sorry for what it was considered a "suspicious link", I only wanted to use an email different from my master email!
Probably this one is better: jeky (at) community.it
Sorry again

The .cl file was embedded inside. I have obtained it through reverse engineering on page 10, first post.

[Amph]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

## Mod x11 (separate kernels)

is this a mod of the "2% fee" version?

No (I haven't sources of  "2% fee" version).
Maybe algo is same.
One main difference -- my version is free.

someone should compile it for windows maybe post it in the official thread sph-cgminer

[TheMathGuy]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

## Mod x11 (separate kernels)

0. Use "kernel" : "x11mod" in config file or -k x11mod via command line.
1. Do not use intensity higher than 15.
2. In case of instability please set a little bit lower engine frequency than a original sgminer.
3. Tested only on Ubuntu x64 and BAMT..
4. Tested only on R9 280x and R9 270x.

My experience:
MSI R9 280x 3.4 MH/s

"intensity" : "15",
"vector" : "1",
"worksize" : "256",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1200",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.200",
"gpu-threads" : "2"

Rig
5 x Sapphire R9 270x Vapor-X 10.43 MH/s (~2.08 MH/s per card)
"intensity" : "15",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1150",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.150,1.150,1.150,1.150,1.150",
"gpu-threads" : "2"

Open sourced == NO HIDDEN MININGS )

If you satisfied, please donate

BTC: 1LykvDuT7PCJ2xgT513RsyWQSZ9pbrDFa6
MRO: 47mfp5AVx6R1Gdc6qPZeV2Ceq1Aw3HFXLRHgjW2pHszVRLzg5pe4tNPMz1NSmAYADGFmUDthoLzyBDB GEz7AoFya9QZKWcu
LTC: LYpe5amuVYdSKmi3D5HCoKMeBd6yty8xVi

Thanks.

Dude, awesome! Just compiled, went from 1.60 per card to 2.35 (~+47%), no fee, no errors, just smooth sailing.
You should definitely make your own thread in case you want to continue developing this miner.

[jeky]

HI everyone!

Could you check my version of sgminer?

Hi lasybear,
Is your version using the kernel obtained by Remember remember the 5th of November through reverse engineering on page 10, first post? I guess yes

Great work anyway
\Jeky

[lasybear]

HI everyone!

Could you check my version of sgminer?

Hi lasybear,
Is your version using the kernel obtained by Remember remember the 5th of November through reverse engineering on page 10, first post? I guess yes

Great work anyway
\Jeky

Yep, with a really little corrections. But i didn't optimize kernel (11 kernels, to be precise). I've made changes in sgminer for work with this .cl.

[Amph]

HI everyone!

Could you check my version of sgminer?

Hi lasybear,
Is your version using the kernel obtained by Remember remember the 5th of November through reverse engineering on page 10, first post? I guess yes

Great work anyway
\Jeky

Yep, with a really little corrections. But i didn't optimize kernel (11 kernels, to be precise). I've made changes in sgminer for work with this .cl.

the miner was unable to open x11mod for reading?

[asnghost]

HI everyone!

Could you check my version of sgminer?

https://github.com/lasybear/sph-sgminer_x11mod

## Mod x11 (separate kernels)

0. Use "kernel" : "x11mod" in config file or -k x11mod via command line.
1. Do not use intensity higher than 15.
2. In case of instability please set a little bit lower engine frequency than a original sgminer.
3. Tested only on Ubuntu x64 and BAMT..
4. Tested only on R9 280x and R9 270x.

My experience:
MSI R9 280x 3.4 MH/s

"intensity" : "15",
"vector" : "1",
"worksize" : "256",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1200",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.200",
"gpu-threads" : "2"

Rig
5 x Sapphire R9 270x Vapor-X 10.43 MH/s (~2.08 MH/s per card)
"intensity" : "15",
"vectors" : "1",
"worksize" : "128",
"kernel" : "x11mod",
"thread-concurrency" : "8192",
"lookup-gap" : "2",
"gpu-engine" : "1150",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "1.150,1.150,1.150,1.150,1.150",
"gpu-threads" : "2"

Open sourced == NO HIDDEN MININGS )

If you satisfied, please donate

BTC: 1LykvDuT7PCJ2xgT513RsyWQSZ9pbrDFa6
MRO: 47mfp5AVx6R1Gdc6qPZeV2Ceq1Aw3HFXLRHgjW2pHszVRLzg5pe4tNPMz1NSmAYADGFmUDthoLzyBDB GEz7AoFya9QZKWcu
LTC: LYpe5amuVYdSKmi3D5HCoKMeBd6yty8xVi

Thanks.

Open sourced == NO HIDDEN MININGS <--- that's how it should be!

[lasybear]

HI everyone!

Could you check my version of sgminer?

Hi lasybear,
Is your version using the kernel obtained by Remember remember the 5th of November through reverse engineering on page 10, first post? I guess yes

Great work anyway
\Jeky

Yep, with a really little corrections. But i didn't optimize kernel (11 kernels, to be precise). I've made changes in sgminer for work with this .cl.

the miner was unable to open x11mod for reading?

Maybe missing kernels folder?
https://bitcointalk.org/index.php?topic=623409.msg6911769#msg6911769

[Amph]

HI everyone!

Could you check my version of sgminer?

Hi lasybear,
Is your version using the kernel obtained by Remember remember the 5th of November through reverse engineering on page 10, first post? I guess yes

Great work anyway
\Jeky

Yep, with a really little corrections. But i didn't optimize kernel (11 kernels, to be precise). I've made changes in sgminer for work with this .cl.

the miner was unable to open x11mod for reading?

Maybe missing kernels folder?
https://bitcointalk.org/index.php?topic=623409.msg6911769#msg6911769

yeah i thought there was something missed in the folder lol

anyway it stopped working, seems unstable, sometimes it work other times not