[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[ozzy1926]

which amd driver should we use 13.12 or 14.4 with a 290?

[oktay50000]

any help runing this with defult bamt commands?(intergrate into bamt)
mine start etc....

i installed it but have to start manully and i want to run it but defult mine commands any help?

[oktay50000]

which amd driver should we use 13.12 or 14.4 with a 290?

4x 290 14.4 3.6 mh each

[goodluck0319]

what is your setting for your 290?

[bigblind]

what is your setting for your 290?

Cards do run defintately hotter for me, about 20 °C from 59 to about 80. Had to set fans from 55% to 60%.

Settings:

"gpu-engine" : "1020",
"gpu-threads" : "2",
"gpu-fan" : "60",
"gpu-platform" : "0",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",
"worksize" : "128",
"lookup-gap" : "2",
"shaders" : "2560",
"thread-concurrency" : "8192",
"intensity" : "19",
"sharethreads" : "32",

haven't tried higher tc yet.

[thefrog]

Doesn't work on ASUS 280X .... around 5% increase hashrate

Doesn't work hmm!!!!!!

this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release




I'd say it does work, very nicely actually

Can you share your settings pleas ?
I can not get pass 3.1

[Tiger78]

Hi all. Who uses 5850 or 7790(260x) please share options.

[oktay50000]

for me in windows its ok
but on bamt afer working 20~60 min sgminer closes itself
i tried diffrent voltages and clocks but no go
any tip?

[bitcoinm3ster]

its safe to use? anyone confirmed the source? no hidden trojan etc?

i use virustotal to check it out but ...

[Eastwind]

which amd driver should we use 13.12 or 14.4 with a 290?

For 7970(280X), there is no speed difference. The openCL version of 13.12 and 14.4 is the same.

[jimlite]

Doesn't work on ASUS 280X .... around 5% increase hashrate

Doesn't work hmm!!!!!!

this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release




I'd say it does work, very nicely actually

Can you share your settings pleas ?
I can not get pass 3.1

Well your fan speeds and temps are missing on some of the cards.

[kaltar]

Doesn't work on ASUS 280X .... around 5% increase hashrate

Doesn't work hmm!!!!!!

this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release




I'd say it does work, very nicely actually

Can you share your settings pleas ?
I can not get pass 3.1

There you go


"kernel" : "x11mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "30",
"shares" : "0",
"auto-fan" : true,
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1160",
"gpu-fan" : "0-85",
"gpu-platform" : "0",
"gpu-memclock" : "1450",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "1.200",
"intensity" : "19",
"temp-target" : "80",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"shaders" : "0",
"thread-concurrency" : "8192",
"no-pool-disable" : true
}

[kaltar]

Doesn't work on ASUS 280X .... around 5% increase hashrate

Doesn't work hmm!!!!!!

this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release




I'd say it does work, very nicely actually

Can you share your settings pleas ?
I can not get pass 3.1

Well your fan speeds and temps are missing on some of the cards.

Well that`s a hardware problem, i got a fan dead on 2 cards and can`t find replacement for them, right now i got some regular fans zippy tied on top of the non working ones.

[jimlite]

Doesn't work on ASUS 280X .... around 5% increase hashrate

Doesn't work hmm!!!!!!

this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release




I'd say it does work, very nicely actually

Can you share your settings pleas ?
I can not get pass 3.1

Well your fan speeds and temps are missing on some of the cards.

Well that`s a hardware problem, i got a fan dead on 2 cards and can`t find replacement for them, right now i got some regular fans zippy tied on top of the non working ones.

Ok, thanks. But is Lasybear's or Girino's version proven free from any trojans or rats?

[itraxe]

finally i installed it on my pimp

here is manual

in terminal type

pmupdate or pimpupdate

after run it again

and choose 13 to install mod x11 miner

after choose 1 to update poolmanager

and done

enjoy

[min]

Hi , this miner work good but I don't see GPU fan and temp ... Somebody have the same problem or a response ?

Thank so much

Work good with 6 x r9 290 on windows 8.1 . I download the driver from windows update and I have no problem

http://hpics.li/395a0e6

[Amph]

Doesn't work on ASUS 280X .... around 5% increase hashrate

Doesn't work hmm!!!!!!

this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release




I'd say it does work, very nicely actually

Can you share your settings pleas ?
I can not get pass 3.1

Well your fan speeds and temps are missing on some of the cards.

Well that`s a hardware problem, i got a fan dead on 2 cards and can`t find replacement for them, right now i got some regular fans zippy tied on top of the non working ones.

Ok, thanks. But is Lasybear's or Girino's version proven free from any trojans or rats?

lasybear version was compiled by remember the 5th ecc..., he seems an old member, we can trust him i suppose..

[Remember remember the 5th of November]

Try using Elun's version for fixed difficulty and other bugfixes.

[min]

Try using Elun's version for fixed difficulty and other bugfixes.

ok I do that , but , this miner not mine on 2 pool same time . ^^'

[Remember remember the 5th of November]

Try using Elun's version for fixed difficulty and other bugfixes.

ok I do that , but , this miner not mine on 2 pool same time . ^^'

That was the point of that miner. To remove the 2% pool.