[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[mrbrdo]

which coins use this algorithm? i see they call it "marucoin" algorithm in sph-sgminer, but is marucoin the first coin to use it or only the most famous coin?

Yep it's marucoin. it's the same as X11 it just has 2 additional sph algos (hamsi and fugue). By the way, once you earn enough from the donations (which I have nothing against), consider contributing some of your improvements to sgminer (https://github.com/sgminer-dev/sgminer/tree/v5_0). Since it would not be possible to do this without sgminer (or cgminer in the first place), it is nice to give something back from time to time. Cheers!

[1714122555]

1714122555

[1714122555]

1714122555

[1714122555]

1714122555

[girino]

which coins use this algorithm? i see they call it "marucoin" algorithm in sph-sgminer, but is marucoin the first coin to use it or only the most famous coin?

Yep it's marucoin. it's the same as X11 it just has 2 additional sph algos (hamsi and fugue). By the way, once you earn enough from the donations (which I have nothing against), consider contributing some of your improvements to sgminer (https://github.com/sgminer-dev/sgminer/tree/v5_0). Since it would not be possible to do this without sgminer (or cgminer in the first place), it is nice to give something back from time to time. Cheers!

I have no real improvements on the C code from sgminer, all improvements are on the opencl code, which is already free and can be integrated into the original code whenever the author wants. It is not up to me to decide what get's merged back into his code.

[girino]

which coins use this algorithm? i see they call it "marucoin" algorithm in sph-sgminer, but is marucoin the first coin to use it or only the most famous coin?

Yep it's marucoin. it's the same as X11 it just has 2 additional sph algos (hamsi and fugue). By the way, once you earn enough from the donations (which I have nothing against), consider contributing some of your improvements to sgminer (https://github.com/sgminer-dev/sgminer/tree/v5_0). Since it would not be possible to do this without sgminer (or cgminer in the first place), it is nice to give something back from time to time. Cheers!

are you one of the developers for the original sgminer? I'd like to ask some questions about the current opencl implementation  of x13:
1- The code is based on SPH code, and as such has several tuning parameters, mainly "SPH_HAMSI_EXPAND_BIG" from 1 to 8 and "SPH_HAMSI_EXPAND_SMALL" (not sure about the valid range). Have you experimented with all the values before choosing "SPH_HAMSI_EXPAND_BIG=1"?

I'm asking because I did some experiments with Groetsl and figured out that the current parameters were actually the best ones, and didn't want to loose time with something that has already been tested.

[girino]

girino, do you plan to release an update for x13 algo? I tried the other free version, but can't mine with it because the rig locks up after 8 hours requiring a hard reboot.  All my cards are 270 or 270x and I've seen others with the same card have the same instability issues with the free version.

Well, you asked for it, you got it. X13-sgminer, slightly faster than lazybear's (5% on my 280x), stable as always, linux binary for now, windows binary later today, and source. Donation fee reduced to 1%.

downloads:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ

[ozzy1926]

girino, do you plan to release an update for x13 algo? I tried the other free version, but can't mine with it because the rig locks up after 8 hours requiring a hard reboot.  All my cards are 270 or 270x and I've seen others with the same card have the same instability issues with the free version.

Well, you asked for it, you got it. X13-sgminer, slightly faster than lazybear's (5% on my 280x), stable as always, linux binary for now, windows binary later today, and source. Donation fee reduced to 1%.

downloads:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ

is there a windows version?

[mahowi]

girino, do you plan to release an update for x13 algo? I tried the other free version, but can't mine with it because the rig locks up after 8 hours requiring a hard reboot.  All my cards are 270 or 270x and I've seen others with the same card have the same instability issues with the free version.

Well, you asked for it, you got it. X13-sgminer, slightly faster than lazybear's (5% on my 280x), stable as always, linux binary for now, windows binary later today, and source. Donation fee reduced to 1%.

downloads:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ

is there a windows version?

[girino]

girino, do you plan to release an update for x13 algo? I tried the other free version, but can't mine with it because the rig locks up after 8 hours requiring a hard reboot.  All my cards are 270 or 270x and I've seen others with the same card have the same instability issues with the free version.

Well, you asked for it, you got it. X13-sgminer, slightly faster than lazybear's (5% on my 280x), stable as always, linux binary for now, windows binary later today, and source. Donation fee reduced to 1%.

downloads:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ

is there a windows version?

Now there is:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ

I have not tested it yet because i don't have a GPU on my windows machine. Please report any problems.

[girino]

girino, do you plan to release an update for x13 algo? I tried the other free version, but can't mine with it because the rig locks up after 8 hours requiring a hard reboot.  All my cards are 270 or 270x and I've seen others with the same card have the same instability issues with the free version.

Well, you asked for it, you got it. X13-sgminer, slightly faster than lazybear's (5% on my 280x), stable as always, linux binary for now, windows binary later today, and source. Donation fee reduced to 1%.

downloads:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ

is there a windows version?

Now there is:
https://www.dropbox.com/sh/enov174f6mwtztn/AACLSbbBC06Xq0jz1_YSl5Swa
https://mega.co.nz/#F!FIo1kCCZ!G4WAGh8TFvTSVoUfdclPtQ

I have not tested it yet because i don't have a GPU on my windows machine. Please report any problems.

false alarm. windows version is giving too many hardware errors, i'll remove it until i can figure out why

[hashbrown9000]

thanks girino. when i have time i'll get it on my BAMT rigs.

[girino]

thanks girino. when i have time i'll get it on my BAMT rigs.

I think the problem with the windows version might be bad drivers on my machine at work. If someone with a windows machine could kindly test it for me and post results (I am looking for several minutes of mining, like 20 to 30 minutes, with at least one share found and no hardware errors).

The file can be found hee:
https://www.dropbox.com/sh/enov174f6mwtztn/AAAiX2Sd97lKrkn9hUk6Yb2za/BAD

Thanks a lot.

[icelove]

thanks girino. when i have time i'll get it on my BAMT rigs.

I think the problem with the windows version might be bad drivers on my machine at work. If someone with a windows machine could kindly test it for me and post results (I am looking for several minutes of mining, like 20 to 30 minutes, with at least one share found and no hardware errors).

The file can be found hee:
https://www.dropbox.com/sh/enov174f6mwtztn/AAAiX2Sd97lKrkn9hUk6Yb2za/BAD

Thanks a lot.

is it work for HD5XXX & HD6XXX? all HW...

[gruevy01]

thanks girino. when i have time i'll get it on my BAMT rigs.

I think the problem with the windows version might be bad drivers on my machine at work. If someone with a windows machine could kindly test it for me and post results (I am looking for several minutes of mining, like 20 to 30 minutes, with at least one share found and no hardware errors).

The file can be found hee:
https://www.dropbox.com/sh/enov174f6mwtztn/AAAiX2Sd97lKrkn9hUk6Yb2za/BAD

Thanks a lot.

I tried it and it has been stable for 1.5 hrs with about 6% increase in hashrate.
Excellent work.

[ozzy1926]

win version doesnt wok for me

it works now but my old  .conf file doesnt wok how can i disable %1?failover 0 disabled in this version

[oktay50000]

any x11/13 mod version with multi algo???

[girino]

win version doesnt wok for me

it works now but my old  .conf file doesnt wok how can i disable %1?failover 0 disabled in this version

The binaries are all with the 1% fee, to disable it, compile from the sources using

Code:

make CFLAGS=-DDISABLE_DONATION

detailed instructions on how to build from sources are instructions are found in the "doc/windows-build.txt" file.

[luck888888]

HD68XX 5XXX not work,all hw.
please help,Thanks

[sterob]

when will TS release source in github so people can check if there is no malware/trojan to steal wallet?

[girino]

when will TS release source in github so people can check if there is no malware/trojan to steal wallet?

I am not sure who "TS" is, but the code for both those miners is available. Check the first post please.

[girino]

HD68XX 5XXX not work,all hw.
please help,Thanks

Yes, that might be why i thought it to be broken in the first place: my windows machine is has a 6350. Looks like the hamsi implementation by sph is not compatible with those boards. Is there a lot of people using those boards around? Is it worth it to try to port another hamsi implementation just for those boards?

[Pengju]

HD68XX 5XXX not work,all hw.
please help,Thanks

Yes, that might be why i thought it to be broken in the first place: my windows machine is has a 6350. Looks like the hamsi implementation by sph is not compatible with those boards. Is there a lot of people using those boards around? Is it worth it to try to port another hamsi implementation just for those boards?

I have three 5970 and one 6990, all have the same HW error problem.
I was using your donation version for 2 weeks already on my others rigs.
So I really wish you could develop a version to solve the problem.

(btw, one of my friends met the same problem on his three 7850 cards, I don’t know why, although it is ok on my 7850 cards)