[ANN] Eloipool - FAST Python3 pool server software - GBT/stratum/dyntarget/proxy

[tomaszsz]

Miner talks to Eloipool.

ok it is easy

MMP talks to namecoind.

ok, thats easy too but

Eloipool talks to bitcoind and MMP independently.

which params (MMP url, MMP host, MMP port ? )

in eloipool makes that eloipool talks to MMP ? 

or my configuration

mining proxy command

Code:

python merged-mining-proxy  -w 8330 -p http://ssecreteloipool:222@127.0.0.1:9947/ -x http://namecoinrpc:manecoinrpcpass@localhost:9377/

eloipool config.py

Code:

# Secret username allowed to use setworkaux
SecretUser = "ssecreteloipool"

# Addresses to listen on for JSON-RPC GBT/getwork server
JSONRPCAddresses = (
        ('', 9947),
)

namecoind config

Code:

rpcuser=namecoinrpc
rpcpassword=manecoinrpcpass
 
 
 rpcport=9377

is ok, and i should just point miner to eloipool (port 9947 ) , instead  MMP (port 8330)   ?

[Luke-Jr]

You're missing the GotWorkURI stuff.

You saw README, right?

[tomaszsz]

You're missing the GotWorkURI stuff.

You saw README, right?

yes , i saw

README:

"Eloipool supports merged mining using the setworkaux/gotwork RPC interface."

and in config.py

# URI to send gotwork with info for every share submission
#GotWorkURI = ''

and thats ALL...


 

SO
finall configuration

mining proxy command

Code:

python merged-mining-proxy  -w 8330 -p http://ssecreteloipool:222@127.0.0.1:9947/ -x http://namecoinrpc:manecoinrpcpass@localhost:9377/

eloipool config.py

Code:

# Secret username allowed to use setworkaux
SecretUser = "ssecreteloipool"

# Addresses to listen on for JSON-RPC GBT/getwork server
JSONRPCAddresses = (
        ('', 9947),
)

GotWorkURI = "http://mergedproxyuser:mergedproxypass@127.0.0.1:8330/"

namecoind config

Code:

rpcuser=namecoinrpc
rpcpassword=manecoinrpcpass
 
 
 rpcport=9377

Code:

and user miner program connect to 9947 

is it ok ?

[Luke-Jr]

Looks okay. Does it work?

[smracer]

>>> 2013-05-09 09:52:26,704     sharelogging    ERROR   Error setting up share logger sql: (<class 'NameError'>, NameError("name 'long' is not defined",), <traceback object at 0x1ae0200>)


I am trying to get mysql to record the shares.  I set up the 'shares' table and columns but it is not recording shares.

[qubic]

I got an error:

Code:

makeCoinbaseTxn	ERROR	Coinbaser failed!

then i do some debug
line 105 in eloipool.py raise an error

Code:

nout = int(p.stdout.readline())

I guess CoinbaserCmd is invalid, then i run the command in terminal

Code:

echo -e "1\\n$((%d / 100))\\n1579aXhdwvKZEMrAKoCZhzGuqMa8EonuXU"

the result is:

Code:

bash: %d / 100: syntax error: operand expected (error token is "%d / 100")

any ideas?

[Luke-Jr]

I got an error:

Code:

makeCoinbaseTxn	ERROR	Coinbaser failed!

then i do some debug
line 105 in eloipool.py raise an error

Code:

nout = int(p.stdout.readline())

I guess CoinbaserCmd is invalid, then i run the command in terminal

Code:

echo -e "1\\n$((%d / 100))\\n1579aXhdwvKZEMrAKoCZhzGuqMa8EonuXU"

the result is:

Code:

bash: %d / 100: syntax error: operand expected (error token is "%d / 100")

any ideas?

My guess would be a non-BASH default shell...

[qubic]

I got an error:

Code:

makeCoinbaseTxn	ERROR	Coinbaser failed!

then i do some debug
line 105 in eloipool.py raise an error

Code:

nout = int(p.stdout.readline())

I guess CoinbaserCmd is invalid, then i run the command in terminal

Code:

echo -e "1\\n$((%d / 100))\\n1579aXhdwvKZEMrAKoCZhzGuqMa8EonuXU"

the result is:

Code:

bash: %d / 100: syntax error: operand expected (error token is "%d / 100")

any ideas?

My guess would be a non-BASH default shell...

I found the reason

Code:

p.stdout.readline()

return

Code:

b'-e 1\n'

My default shell is Bash，I use Python 3.3.1 on Ubuntu

[Luke-Jr]

I got an error:

Code:

makeCoinbaseTxn	ERROR	Coinbaser failed!

then i do some debug
line 105 in eloipool.py raise an error

Code:

nout = int(p.stdout.readline())

I guess CoinbaserCmd is invalid, then i run the command in terminal

Code:

echo -e "1\\n$((%d / 100))\\n1579aXhdwvKZEMrAKoCZhzGuqMa8EonuXU"

the result is:

Code:

bash: %d / 100: syntax error: operand expected (error token is "%d / 100")

any ideas?

My guess would be a non-BASH default shell...

I found the reason

Code:

p.stdout.readline()

return

Code:

b'-e 1\n'

My default shell is Bash，I use Python 3.3.1 on Ubuntu

If your default shell was BASH, you wouldn't get that result.

[voidale]

Got this new error any idea what this means?

Code:

May 10 08:04:05 <12>Change from height 235474->235476; no longpoll merkleroots available!
May 10 08:04:05 <12>clearMerkleRoots running out! only 0 left

Can anyone tell me how do I upgrade eloipool to latest release? And always was curious why Longpoll woke up has 2 lines and which one of them is accurate one says 20 clients and the other 5 clients weird? Also got another question does increasing the difficulty of shares mining reduces server load?

Code:

Longpoll woke up 20 clients in 0.278 seconds
Waiting 4.58 seconds to longpoll
Longpoll woke up 5 clients in 0.000 seconds

+ Bug Report
Looks like Statrum Protocol isn't working on CPU mining with Ufasoft + Also when trying to connect to eloipool pool server statrum with stratum-mining-proxy (Slush0's) it will not connect and will give the following error:

Code:

2013-05-12 05:18:44,862 WARNING proxy mining_proxy.main # Trying to connect to S
tratum pool at http://mining.ligius.st:3334
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
Failure: stratum.custom_exceptions.TransportException: SocketTransportClientFact
ory connection timed out

[voidale]

***PLEASE HELP***
I tried to upgrade everything python + eloipool. Now my pool doesn't work! It all started with simple

Code:

 import jsonrpc
ImportError: No module named jsonrpc

I have tried

Code:

cd python-bitcoinrpc
python3 setup.py build
python3 setup.py install
ls
cp -Rf jsonrpc/ /usr/local/lib/python3.2/dis-packages/

And it made it worse!

Code:

2013-05-12 23:08:19,014 merkleMaker     CRITICAL        Traceback (most recent call last):
  File "/usr/local/lib/python3.2/json/decoder.py", line 361, in raw_decode
    obj, end = self.scan_once(s, idx)
StopIteration

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/eloipool/merklemaker.py", line 692, in run
    self.merkleMaker_I()
  File "/home/eloipool/merklemaker.py", line 682, in merkleMaker_I
    self.merkleMaker_II()
  File "/home/eloipool/merklemaker.py", line 648, in merkleMaker_II
    return self._updateMerkleTree()
  File "/home/eloipool/merklemaker.py", line 548, in _updateMerkleTree
    self._updateMerkleTree_I()
  File "/home/eloipool/merklemaker.py", line 512, in _updateMerkleTree_I
    r = self._updateMerkleTree_fromTS(TS)
  File "/home/eloipool/merklemaker.py", line 477, in _updateMerkleTree_fromTS
    MP = self._CallGBT(TS)
  File "/home/eloipool/merklemaker.py", line 327, in _CallGBT
    MP = access.getblocktemplate(self.GBTReq)
  File "/usr/local/lib/python3.2/site-packages/bitcoinrpc/authproxy.py", line 102, in __call__
    response = self._get_response()
  File "/usr/local/lib/python3.2/site-packages/bitcoinrpc/authproxy.py", line 128, in _get_response
    parse_float=decimal.Decimal)
  File "/usr/local/lib/python3.2/json/__init__.py", line 320, in loads
    return cls(**kw).decode(s)
  File "/usr/local/lib/python3.2/json/decoder.py", line 345, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/local/lib/python3.2/json/decoder.py", line 363, in raw_decode
    raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded

*** Solution***
found old pantehicon's fix!
A quick fix is to decode the bytes into UTF-8. On line 72 of bitcoinrpc/authproxy.py change:

Code:

Code:
self.__auth_header = "Basic %s" % base64.b64encode(authpair)
to read:

Code:
self.__auth_header = "Basic %s" % base64.b64encode(authpair).decode()

Hope this helps

[Anonymailer]

what config would be required to run as a sub pool of eligius?

[optimator]

I have Eloipool up and running on Testnet.

When I find a block I receive this message in the log file:

Code:

2013-05-20 17:21:33,131	blockSubmission	DEBUG	Upstream 'primary' accepted block
2013-05-20 17:21:33,241	redflag	CRITICAL	Upstream 'primary' block submission failed: rejected

However, it appears the network has accepted the block.

Any ideas why I'm getting the "redflag" message?

[tomaszsz]

Looks okay. Does it work?

yes  many thanks
merged mining work ! (but i dont find any block yet )

but from time to time i get

Code:

2013-05-20T20:40:39.879372,solve,?,0,2125c31fb29aa6947264472d420e5f9e5582ef21576640c5eab4a4a300000000
Could not connect to http://127.0.0.1:9947/
Parent setworkaux failed: http://127.0.0.1:9947/
2013-05-20T20:40:40.001529,updateaux
2013-05-20T20:40:41.056715,solve,?,0,10cfc91c8c7b6dfa4c19fe0a8497411b9e439091da62c2bd6a9cd8d900000000

is it something with multithreading in eloipool  ?

[tomaszsz]

I got an error:

Code:

makeCoinbaseTxn	ERROR	Coinbaser failed!

then i do some debug
line 105 in eloipool.py raise an error

Code:

nout = int(p.stdout.readline())

I guess CoinbaserCmd is invalid, then i run the command in terminal

Code:

echo -e "1\\n$((%d / 100))\\n1579aXhdwvKZEMrAKoCZhzGuqMa8EonuXU"

the result is:

Code:

bash: %d / 100: syntax error: operand expected (error token is "%d / 100")

any ideas?

My guess would be a non-BASH default shell...

I found the reason

Code:

p.stdout.readline()

return

Code:

b'-e 1\n'

My default shell is Bash，I use Python 3.3.1 on Ubuntu

If your default shell was BASH, you wouldn't get that result.

i have the same with BASH, python 3.2 , on ubuntu 12.

commenting CoinbaserCmd, may help but it isn't good solution...

[tomaszsz]

>>> 2013-05-09 09:52:26,704     sharelogging    ERROR   Error setting up share logger sql: (<class 'NameError'>, NameError("name 'long' is not defined",), <traceback object at 0x1ae0200>)


I am trying to get mysql to record the shares.  I set up the 'shares' table and columns but it is not recording shares.

please post your config with Sharelogging section

[optimator]

I'm using bitcoind 0.8.1 and I'm getting a GBT timeout error.

Here is the logfile:

Code:

2013-05-23 17:39:48,777	newBlockNotification	INFO	Received new block notification
2013-05-23 17:40:14,456	merkleMaker	CRITICAL	Traceback (most recent call last):
  File "/home/ubuntu/eloipool/merklemaker.py", line 692, in run
    self.merkleMaker_I()
  File "/home/ubuntu/eloipool/merklemaker.py", line 682, in merkleMaker_I
    self.merkleMaker_II()
  File "/home/ubuntu/eloipool/merklemaker.py", line 660, in merkleMaker_II
    return self._updateMerkleTree()
  File "/home/ubuntu/eloipool/merklemaker.py", line 548, in _updateMerkleTree
    self._updateMerkleTree_I()
  File "/home/ubuntu/eloipool/merklemaker.py", line 512, in _updateMerkleTree_I
    r = self._updateMerkleTree_fromTS(TS)
  File "/home/ubuntu/eloipool/merklemaker.py", line 477, in _updateMerkleTree_fromTS
    MP = self._CallGBT(TS)
  File "/home/ubuntu/eloipool/merklemaker.py", line 327, in _CallGBT
    MP = access.getblocktemplate(self.GBTReq)
  File "/home/ubuntu/python-bitcoinrpc/jsonrpc/authproxy.py", line 100, in __call__
    httpresp = self.__conn.getresponse()
  File "/usr/lib/python3.2/http/client.py", line 1049, in getresponse
    response.begin()
  File "/usr/lib/python3.2/http/client.py", line 346, in begin
    version, status, reason = self._read_status()
  File "/usr/lib/python3.2/http/client.py", line 308, in _read_status
    line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1")
  File "/usr/lib/python3.2/socket.py", line 276, in readinto
    return self._sock.recv_into(b)
socket.timeout: timed out

2013-05-23 17:40:25,337	merkleMaker	INFO	New block: 00000000000001328ed5ecd715bbb72648832c108b521720bfa7127af2d07639 (height: 237559; bits: 1a017fe9)

You can see eloipool receives the new block notification, attempts to build the merkle tree using the transactions from GBT but then times out.

It's almost 50 seconds later the new block is pushed to the clients.

Any idea what is causing this error?

[pascal257]

I'm getting this error:

Code:

Traceback (most recent call last):
  File "/home/coin/eloipool/merklemaker.py", line 513, in _updateMerkleTree_I
    r = self._updateMerkleTree_fromTS(TS)
  File "/home/coin/eloipool/merklemaker.py", line 478, in _updateMerkleTree_fromTS
    MP = self._CallGBT(TS)
  File "/home/coin/eloipool/merklemaker.py", line 328, in _CallGBT
    MP = access.getblocktemplate(self.GBTReq)
  File "/usr/local/lib/python3.2/site-packages/bitcoinrpc/authproxy.py", line 102, in __call__
    response = self._get_response()
  File "/usr/local/lib/python3.2/site-packages/bitcoinrpc/authproxy.py", line 128, in _get_response
    parse_float=decimal.Decimal)
  File "/usr/local/lib/python3.2/json/__init__.py", line 332, in loads
    return cls(**kw).decode(s)
  File "/usr/local/lib/python3.2/json/decoder.py", line 353, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/local/lib/python3.2/json/decoder.py", line 371, in raw_decode
    raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded

Its caused by a failed authorization. I tried to print the AuthHeader and got this as result: "Basic b'dXNlcjpwYXNzd29yZA=='"
If I put the string (without the b') directly into __auth_header it works flawlessy.

I also tried python3.3 with the same result.

[ppcko]

Quick and dirty fix? Works for me.
Add .decode() to the following line (authproxy.py):

Code:

self.__auth_header = "Basic %s" % base64.b64encode(authpair).decode()

[kinlo]

The GBT timeout issues are solved with bitcoin 0.8.2, best to upgrade.


Yes 0.8.2 hasn't been released yet.  But all pools have backported the related fix(es) in order to solve this problem already....

Or just use an existing pool