pmorici (OP)
|
|
October 06, 2014, 07:34:52 PM |
|
Lead time? Edit: just read this: Do you have one for the IBM 2000W
Not on the shelf but we can do a custom order for almost any power supply at customer request. Typical lead time for a custom order is 3 - 8 weeks depending on your lead time vs. cost requirements and availability of the required connectors. Typical minimum order is going to be 100 - 300 boards to be cost effective but it varies by PSU. Which answers my question. I only need 5 to 10 units, so I guess that's out of the question. 3 weeks is our typical lead time if all the parts are readily available. We stock our DPS-800GBA (1000 Watt PSU) product for immediate delivery and it is priced to be competitive on a $/watt basis with the DPS-2000bb if you are buying multiple.
|
|
|
|
pmorici (OP)
|
|
October 11, 2014, 01:52:56 PM |
|
We still have about 5 DPS-1200 boards in stock and hundred of DPS-800GBA boards ready to ship. With the slump in Bitcoin price we are willing to entertain offers for large orders of boards. Our stock of DPS-800GBA boards is piling up so we need to clear them out. Make an offer.
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 12, 2014, 06:31:00 PM |
|
Any chance you could add a 5v Type A female USB header on any of your boards? This would be a great feature allowing to power 5v devices such as R-Pi, BeagleBone and WRT router/AP's etc.
I will be shipping the rest of those cases your way within the next week and will PM you tracking info.
Thanks!
|
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 12, 2014, 06:57:41 PM |
|
Thanks for posting that, it's been awhile since I read trough this thread. I was just offering a suggestion to the OP so that they might consider adding a header on a future board revision. Not everyone is into modding and plug n play is so much better anyways.
|
|
|
|
Newar
Legendary
Offline
Activity: 1358
Merit: 1001
https://gliph.me/hUF
|
|
October 12, 2014, 07:03:31 PM |
|
[...] Not everyone is into modding and plug n play is so much better anyways.
Nonono, the modding is 75% of the fun! pmorici explains a bit about it a few posts above the one I linked to.
|
|
|
|
pmorici (OP)
|
|
October 20, 2014, 02:21:11 AM |
|
Thanks for posting that, it's been awhile since I read trough this thread. I was just offering a suggestion to the OP so that they might consider adding a header on a future board revision. Not everyone is into modding and plug n play is so much better anyways. You can definitely get a cheap regulator to get 5v or hook in to the existing 5v pins. We are trying to keep the cost as low as possible and adding additional connectors gets pricey and since most people use these to power Antminers they don't care about 5v. In other news we got a fresh shipment of DPS-800GBA boards in.
|
|
|
|
pmorici (OP)
|
|
November 05, 2014, 09:07:12 PM |
|
Still have a bunch of these in stock.
|
|
|
|
ZiG
|
|
November 06, 2014, 06:05:07 AM |
|
Still have a bunch of these in stock.
...and the new price is... ZiG
|
|
|
|
opieum2
|
|
November 06, 2014, 07:27:44 PM |
|
Any more Common Slot models? I would be interested in some more of those.
|
"amtminers scam joshua zipkin scammer" -Joshua Zipkin leaked skype chats http://bit.ly/1s7U2Yb-For bitcoin to succeed the community must police itself.
|
|
|
pmorici (OP)
|
|
November 06, 2014, 09:25:18 PM |
|
Any more Common Slot models? I would be interested in some more of those.
I have 4 Common Slot board left. The rest are for the DPS-800GBA.
|
|
|
|
pmorici (OP)
|
|
November 06, 2014, 09:39:37 PM |
|
Still have a bunch of these in stock.
...and the new price is... ZiG Price is negotiable for bulk buyers. All reasonable offers will be considered.
|
|
|
|
otromen77
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 09, 2014, 12:23:28 AM |
|
Hi BTCThis is my 1st posting in the forum .I got a question .Is there any possibality to attached more than 4 pcie cable set on the bb ?looking to setup 6 pcie for my 3x S3+ and maybe ⅞ pcie for my UC/UV S1 ? sorry if noobs question
|
|
|
|
ZiG
|
|
November 09, 2014, 05:23:15 AM |
|
Hi BTCThis is my 1st posting in the forum .I got a question .Is there any possibality to attached more than 4 pcie cable set on the bb ?looking to setup 6 pcie for my 3x S3+ and maybe ⅞ pcie for my UC/UV S1 ? sorry if noobs question You will need at least 1200W+ PSU for them... ZiG
|
|
|
|
otromen77
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 09, 2014, 10:25:32 AM |
|
Will the DPS1200FBA dp the job ? What gauge of wire to use and any safety precaution measures that I need to follow to prevent any electrical hazard or worst frying up my boards and my house ?
|
|
|
|
pmorici (OP)
|
|
November 09, 2014, 04:05:59 PM |
|
Will the DPS1200FBA dp the job ? What gauge of wire to use and any safety precaution measures that I need to follow to prevent any electrical hazard or worst frying up my boards and my house ?
The short answer is you need to get 2 PSUs to do this safely. If you are running from standard American home wall outlets (120 Volt power) the DPS1200FBA puts out 900 watts. You need to run on 240 Volt wall power to get the full 1200 watts out of it. Even then it will not power more than 3 Ants A DPS-800GBA can run 2 Antminer S1 (OC or UC) , S3, or S3+ units so if you are planning on 3 S3+ plus an S1 you are going to need 2 PSU's. You would need a 1600+ Watt PSU to power all 4 of those off the same PSU and if you are using standard 15 amp home outlets you are going to exceed the capacity of your 15 amp breakers if you use a single PSU. To use a 1600 Watt PSU safely at full load you really need a more heavy duty outlet than is standard in most American homes.
|
|
|
|
mstrongbow
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
November 09, 2014, 05:07:05 PM |
|
I will be shipping the rest of your breakout board cases later this week...I am upgrading my printer today and should have it back online this evening and I can crank out the last few cases I've promised you. I will post pics asap Thanks again bro!
|
|
|
|
pmorici (OP)
|
|
November 12, 2014, 03:34:40 AM |
|
We've got cables and PSU back in stock and still have boards left.
|
|
|
|
pmorici (OP)
|
|
November 18, 2014, 08:00:51 PM |
|
Just got a fresh batch of boards.
|
|
|
|
DebitMe
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
|
November 19, 2014, 03:52:06 PM |
|
I sent you a PM two days ago about buying more boards, have you had a chance to look at it?
|
|
|
|
|