I'm so out the mining game!

[samsonn25]

Chris you have to read, and re read the post again.

I only reacted because you called me idiot, dummy, stupid.  .    yet Everything I said was true.

[crashoveride54902]

Sorry all ... Can't sell right now. There's no shortage of supplies being sold, so happy hunting!

Will leave thread open for a bit just in case sampsonn25 wants to talk more trash.

@sampsonn25 - I managed to cop myself a few of the coins still on the exchange lists. Yeah, I tried a shitty coin (FUCK PURE!) or two, but it's all chalked up to experience buddy. And - just because I don't have much time under my belt on this forum, I was part of this community way before signing up. Hell, I mined bitcoins with block erupters.

  a woman miner  wow...that is rare Care to snap a few shots of yer rigs? i wanna see yer hubbies work I'm in the middle of building a 5th/s KNC case...gona have a 1300cfm exhaust fan on it so no more worry'in bout heat for me

[chadwickx16]

"10 r9 290s - 4GB... no OC and I got 3.5Mh each card using x11mod sgminer "

Must have been an experiment.  BTC Gpu mining was done already last summer.   Assuming you were doing Scrypt because the r9 290 didnt come out until late November .  With Scrypt it can do 800-900 kh

Ok... you're an idiot. Didn't I say I used the x11mod mining software? So what the hell should that tell you? Does BTC use the x11 algo? And didn't I also say that they were like new, hardly any mining time? Hey dummy, that means I wasn't mining with them last year. Stupid. Just stupid.

I really hope you get this message... actually - I'll PM it to you.

Hey Assh###  I didnt say you were mining them last year, I said GPU mining for btc was dead by last year.  I didnt even say you were mining btc. 

It was still an experiment, with alt algo and alt coins, if not you wouldnt be selling them here.

Well you used  equipment with a better algo, to seemingly get more power to mine but on worthless coins so you must be smarter than anyone else.  The cards are still good to play games though.

This was wonderful!! 

Anyway, my buddy is looking for a 290, what are you asking?

Indeed! lol. I'm not sure if I'm supposed to be upset about it - but I'm totally not! Loved the sensored name calling

Anyhoo - was going to post pics/specs but unless I want my next hobbie not to be taken seriously, I best not sell. Hubbie invested a lot time building me a custom cabinet and installing heavy duty electrical wiring so I could keep close to my shit. He's so awesome!

No worries, best of luck to you! Do you have the 40% boost running for X11? If not PM me, I can help you set it up.

[Lucky Cris]

Chris you have to read, and re read the post again.

I only reacted because you called me idiot, dummy, stupid.  .    yet Everything I said was true.

And I'm sure you were   Did I misperceive your message - possibly. Reread what you wrote but look at it from my perspective; listing items for sale. See the context? But no worries! I'm not mad at you, hope you're mad at me   although I did want to carry it on a lil longer lol.

Oh, and everything you said wasn't true - it wasn't an experiment   It's a hobby that consume too much of time.

[samsonn25]

Im not mad because I experimented too with gpu mining. 5870s and r9 290s too.  It was fun while it lasted but I sold off or reused most of the parts

The new algos x11 and x13 is interesting if and when they become stable and i might return when the game is not rigged anymore.

You have good parts and wont have a hard time to sell.  cheerio

[Lucky Cris]

Sorry all ... Can't sell right now. There's no shortage of supplies being sold, so happy hunting!

Will leave thread open for a bit just in case sampsonn25 wants to talk more trash.

@sampsonn25 - I managed to cop myself a few of the coins still on the exchange lists. Yeah, I tried a shitty coin (FUCK PURE!) or two, but it's all chalked up to experience buddy. And - just because I don't have much time under my belt on this forum, I was part of this community way before signing up. Hell, I mined bitcoins with block erupters.

  a woman miner   wow...that is rare Care to snap a few shots of yer rigs? i wanna see yer hubbies work I'm in the middle of building a 5th/s KNC case...gona have a 1300cfm exhaust fan on it so no more worry'in bout heat for me

Most def! It's still in need of a paint job tho... not sure what the theme's going to be, Can't you tell, I'm all girlie  But I'll tell you that it's a closed cabinet with a clear plexiglass door (hubbie understood I didn't want to see it, but yet still wanted to see it, it that makes sense). He built it tall enough to make room for expansion later, although it would take away my storage space on the bottom.

To combat the heat, I have a total of 5 120mm fans - 3 blowing hot air out - straight out the damn window via exhaust vents (like the ones used for dryers) and what an ugly sight! I think I might paint those too! Anyhoo, 1 fan is cooling my PSU shelf (5 PSUs - o2 per rig and 1 powering the fans and my temp control display). The intake 2nd fan is blowing directly on my boards. Oh, and lastly I have a 10,000 btu portable AC unit blowing a constant 65 into my cabinet. How's that for heat management

I'm only running one rig (5 cards) now because I didn't feel like the hassle of reinstalling Xubuntu on the 2nd, but since I'm not selling now, I might as get her up and running as well.

[Lucky Cris]

Im not mad because I experimented too with gpu mining. 5870s and r9 290s too.  It was fun while it lasted but I sold off or reused most of the parts

The new algos x11 and x13 is interesting if and when they become stable and i might return when the game is not rigged anymore.

You have good parts and wont have a hard time to sell.  cheerio

Interesting... I see I'm not the only one who's suspect, lol!

[Lucky Cris]

And here she is!  

Not ready for the run way yet so I haven't posted in the brag thread. I just moved it this past weekend to an opposite wall so you'll see 2 of the 3 exhaust tubes aren't connected right now. But it's all good for now... I'm only running 5 of the cards, plus it blows warm air on me while I'm sitting at my desk  

http://s17.postimg.org/c2sxscinj/photo_1.jpg

As you can see, it's pretty tall. I got tired of standing (perfect height to do so tho), and sliding my chair across the room when I wanted to sit so I just moved it where it was convenient. Those bulky vents did well when they were in direct line with the window, but too much sitting next to me. So I'm going to have hubbie move them to the rear of the cabinet. BTW, I have fans assisting with blowing the hot air out.

So why go through all the trouble of moving my cabinet only to have to reposition two exhaust lines... well, I had to make room for my comfy chair, of course!

http://s18.postimg.org/d8t7mnqwp/photo_2.jpg

In the next week or so I should have her looking really nice (I'm thinking about just wallpapering it). Since I'll be keeping her and all But first I need to repair the hole in my wall hubbie had to make to run my dedicated electrical line (10 gauge split into 2 12s or maybe 14s?) so I could use a normal outlet. As nice touch, he chose four outlets that have a fail safe switch on it! Just like the ones required in bathrooms.

http://s28.postimg.org/z6gnzp1tp/photo.jpg

My miners aren't plugged into the outlet yet (black box on bottom of pic) because we got the wrong 30amp breaker. Who the hell knew those damn things weren't universal!

[crashoveride54902]

And here she is!  

Not ready for the run way yet so I haven't posted in the brag thread. I just moved it this past weekend to an opposite wall so you'll see 2 of the 3 exhaust tubes aren't connected right now. But it's all good for now... I'm only running 5 of the cards, plus it blows warm air on me while I'm sitting at my desk  

http://s17.postimg.org/c2sxscinj/photo_1.jpg

As you can see, it's pretty tall. I got tired of standing (perfect height to do so tho), and sliding my chair across the room when I wanted to sit so I just moved it where it was convenient. Those bulky vents did well when they were in direct line with the window, but too much sitting next to me. So I'm going to have hubbie move them to the rear of the cabinet. BTW, I have fans assisting with blowing the hot air out.

So why go through all the trouble of moving my cabinet only to have to reposition two exhaust lines... well, I had to make room for my comfy chair, of course!

http://s18.postimg.org/d8t7mnqwp/photo_2.jpg

In the next week or so I should have her looking really nice (I'm thinking about just wallpapering it). Since I'll be keeping her and all But first I need to repair the hole in my wall hubbie had to make to run my dedicated electrical line (10 gauge split into 2 12s or maybe 14s?) so I could use a normal outlet. As nice touch, he chose four outlets that have a fail safe switch on it! Just like the ones required in bathrooms.

http://s28.postimg.org/z6gnzp1tp/photo.jpg

My miners aren't plugged into the outlet yet (black box on bottom of pic) because we got the wrong 30amp breaker. Who the hell knew those damn things weren't universal!

well that is a nice setup ya got there yer hubby did some good work...ya i'm hoping if i remove all the heat from my knc miners they won't need a a/c in the basement...but will have the option to put one in if they do...ya, i had to play with 10 gauge wire too...not fun to try and wire up 4 plugs off 1 incoming wire...but they are on 240v now cause i was only working off 60a service to house...but i'm moving to a new place with 100a service so i'll have more then enough power now...well good luck with your gpu mining

[Umer]

wwell good luck with you can you mention the prices of all above things ...

So i can tell to my friend and he will buy ...