DyslexicZombei
|
|
June 24, 2014, 06:58:49 AM |
|
Congrats nexus.
Appears to be well built from the exterior at least. You planning to do any internal shots?
|
|
|
|
vulgartrendkill
|
|
June 24, 2014, 11:15:07 AM |
|
Congrats nexus.
Appears to be well built from the exterior at least. You planning to do any internal shots?
This. I assume the propero x3 will look like this but bigger case, more fans. Was there a delay getting the LCDs?
|
|
|
|
maardein
|
|
June 24, 2014, 11:39:01 AM |
|
Wow! They actually exist! Might grab one as well if the price is right. I love to have a little less barebone design than many other miners.
What are the usb ports for? Is it possible to daisy chain them? Or something else?
|
BTC: 1788UegKXGXXicfPcbZ1bmSUJ99ZWRCF7p LTC: LZ2rCcoxK4X8wRRynqdxoimd4d3TDNk7Lk PMP: PApSSdorQds5tQysymwDXPAN3viJLFTUs8
|
|
|
DebitMe
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
|
June 24, 2014, 01:29:03 PM |
|
Wow! They actually exist! Might grab one as well if the price is right. I love to have a little less barebone design than many other miners.
What are the usb ports for? Is it possible to daisy chain them? Or something else?
They are not "in stock" yet, so be careful, he is literally like the first person to get one with their custom controller in it, they still have a very large backorder to go through. I am pretty sure the USB port was to load the software onto the machine (someone correct me if I am wrong), but you will not need them anymore in the future. You cannot daisy chain them, each one needs its own ethernet cable.
|
|
|
|
nexus99 (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
June 24, 2014, 02:04:00 PM |
|
I just noticed that to manage pool failover or load balance you must be in the management GUI rather than the miner (lcd) GUI. I believe that the default was "load balance" which I have changed to "failover". Just a gotcha FYI if your miner looks like its only putting out half or a third of its GH/S.
|
|
|
|
DebitMe
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
|
June 24, 2014, 02:06:00 PM |
|
Do you have a way to measure power draw? I do not think final specs have ever been published with their custom controller.
|
|
|
|
nexus99 (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
June 24, 2014, 02:17:15 PM |
|
Do you have a way to measure power draw? I do not think final specs have ever been published with their custom controller.
I have a kilowatt box packed away somewhere still. I'll look for it tonight after work and see what kind of draw the box has at 120v.
|
|
|
|
DebitMe
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
|
June 24, 2014, 02:20:29 PM |
|
Do you have a way to measure power draw? I do not think final specs have ever been published with their custom controller.
I have a kilowatt box packed away somewhere still. I'll look for it tonight after work and see what kind of draw the box has at 120v. Thanks! I know a lot of people have been waiting for power draw estimates with the custom controller. I honestly seeing it being around 125 to 130 watts draw for the entire thing, which is not really, "within spec" as BA has reported, but I guess we will see.
|
|
|
|
TheMinex
Newbie
Offline
Activity: 54
Merit: 0
|
|
June 24, 2014, 02:22:17 PM |
|
The watts and volts meter doesn't look to be functional either. Voltage would be cool to see.
Voltage ( and freq ) would be cool to adjust.... This are the most important parameters to control, tell us if you can set them
|
|
|
|
bobsag3
|
|
June 24, 2014, 02:29:47 PM |
|
The watts and volts meter doesn't look to be functional either. Voltage would be cool to see.
Voltage ( and freq ) would be cool to adjust.... This are the most important parameters to control, tell us if you can set them They will be able to control voltage in the future (not sure if via web pannel, but I know the controller can hard ware wise do it) and you can already adjust the freq from 800mhz to 1200mhz. I will be doing some power testing today on 120 and 220v.
|
|
|
|
TheMinex
Newbie
Offline
Activity: 54
Merit: 0
|
|
June 24, 2014, 02:31:52 PM |
|
Thanks Bob !
|
|
|
|
maardein
|
|
June 24, 2014, 02:36:24 PM |
|
Wow! They actually exist! Might grab one as well if the price is right. I love to have a little less barebone design than many other miners.
What are the usb ports for? Is it possible to daisy chain them? Or something else?
They are not "in stock" yet, so be careful, he is literally like the first person to get one with their custom controller in it, they still have a very large backorder to go through. I am pretty sure the USB port was to load the software onto the machine (someone correct me if I am wrong), but you will not need them anymore in the future. You cannot daisy chain them, each one needs its own ethernet cable. Yeah, I wasn't planning on ordering right now. Their pricing is way to high at the moment. These would probably sell like hot cakes if they were priced at <$150 or so. I was asking because there seem to be 3 usb ports. 1 at the front, and 2 at the back. That seems like a lot if it's only used to load the firmware...
|
BTC: 1788UegKXGXXicfPcbZ1bmSUJ99ZWRCF7p LTC: LZ2rCcoxK4X8wRRynqdxoimd4d3TDNk7Lk PMP: PApSSdorQds5tQysymwDXPAN3viJLFTUs8
|
|
|
DebitMe
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
|
June 24, 2014, 02:40:52 PM |
|
Wow! They actually exist! Might grab one as well if the price is right. I love to have a little less barebone design than many other miners.
What are the usb ports for? Is it possible to daisy chain them? Or something else?
They are not "in stock" yet, so be careful, he is literally like the first person to get one with their custom controller in it, they still have a very large backorder to go through. I am pretty sure the USB port was to load the software onto the machine (someone correct me if I am wrong), but you will not need them anymore in the future. You cannot daisy chain them, each one needs its own ethernet cable. Yeah, I wasn't planning on ordering right now. Their pricing is way to high at the moment. These would probably sell like hot cakes if they were priced at <$150 or so. I was asking because there seem to be 3 usb ports. 1 at the front, and 2 at the back. That seems like a lot if it's only used to load the firmware... Oh I also think there was mention of being able to plug in a WiFi dongle at some point to allow WiFi, that will probably go in a USB slot. There is still a, "surprise' that is unknown too that could possibly take a port. Who knows.
|
|
|
|
maardein
|
|
June 24, 2014, 02:45:23 PM |
|
Wow! They actually exist! Might grab one as well if the price is right. I love to have a little less barebone design than many other miners.
What are the usb ports for? Is it possible to daisy chain them? Or something else?
They are not "in stock" yet, so be careful, he is literally like the first person to get one with their custom controller in it, they still have a very large backorder to go through. I am pretty sure the USB port was to load the software onto the machine (someone correct me if I am wrong), but you will not need them anymore in the future. You cannot daisy chain them, each one needs its own ethernet cable. Yeah, I wasn't planning on ordering right now. Their pricing is way to high at the moment. These would probably sell like hot cakes if they were priced at <$150 or so. I was asking because there seem to be 3 usb ports. 1 at the front, and 2 at the back. That seems like a lot if it's only used to load the firmware... Oh I also think there was mention of being able to plug in a WiFi dongle at some point to allow WiFi, that will probably go in a USB slot. There is still a, "surprise' that is unknown too that could possibly take a port. Who knows. Ok, I haven't really been following BA's thread, but wifi could be a nice addition. I wonder what the surprise will be. Oh well, let's wait untill they have stock first before considering ordering
|
BTC: 1788UegKXGXXicfPcbZ1bmSUJ99ZWRCF7p LTC: LZ2rCcoxK4X8wRRynqdxoimd4d3TDNk7Lk PMP: PApSSdorQds5tQysymwDXPAN3viJLFTUs8
|
|
|
nexus99 (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
June 24, 2014, 08:42:45 PM |
|
I'd like:
"Surprise, an extra 3 chips in every box!"
|
|
|
|
nexiswalk
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 25, 2014, 01:36:34 AM |
|
I had mine arrive on June 23rd DOA.
Plug it in after digging around for a power cord that would fit.
From the previous posts above it seems like a bunch of the lights on the board are supposed to come on, as one would expect. I have 2 blue solid lights, a spinning fan and nothing else. Ethernet seems to blink but neither using the static IP the documentation mentions ( 192.168.0.180-199, wtf?) nor DHCP seems to work.
|
|
|
|
bobsag3
|
|
June 25, 2014, 02:19:47 AM |
|
I had mine arrive on June 23rd DOA.
Plug it in after digging around for a power cord that would fit.
From the previous posts above it seems like a bunch of the lights on the board are supposed to come on, as one would expect. I have 2 blue solid lights, a spinning fan and nothing else. Ethernet seems to blink but neither using the static IP the documentation mentions ( 192.168.0.180-199, wtf?) nor DHCP seems to work.
Do you have any orange lights on the hashing PCB? should be 3/4
|
|
|
|
philipma1957
Legendary
Online
Activity: 4270
Merit: 8639
'The right to privacy matters'
|
|
June 25, 2014, 02:30:24 AM |
|
I had mine arrive on June 23rd DOA.
Plug it in after digging around for a power cord that would fit.
From the previous posts above it seems like a bunch of the lights on the board are supposed to come on, as one would expect. I have 2 blue solid lights, a spinning fan and nothing else. Ethernet seems to blink but neither using the static IP the documentation mentions ( 192.168.0.180-199, wtf?) nor DHCP seems to work.
do an ip search there are some free ip search programs. sounds like you have not put the correct ip into it. http://www.advanced-ip-scanner.com/ i have used this one advanced ip scanner free works for windows 7
|
|
|
|
nexus99 (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
June 25, 2014, 02:55:02 AM |
|
I had mine arrive on June 23rd DOA.
Plug it in after digging around for a power cord that would fit.
From the previous posts above it seems like a bunch of the lights on the board are supposed to come on, as one would expect. I have 2 blue solid lights, a spinning fan and nothing else. Ethernet seems to blink but neither using the static IP the documentation mentions ( 192.168.0.180-199, wtf?) nor DHCP seems to work.
If you are handing out DHCP IP addresses on the 192.168.1.0/24 range you can just try all the addresses starting with 192.168.1.1 moving up will you find it. Unless you have a crap ton of devices in your home its gonna be somewhere in the low numbers. I bet its under 20. You can also log into your router and find the IP there. You should get a SSL error when you try to open the management page... so you will need to say ok to that.
|
|
|
|
nexiswalk
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 25, 2014, 03:19:16 AM |
|
thanks guys but I've already done everything here, not in my dhcp table on the router, even did an arp lookup on the switch. I'm a network admin this isn't something new to me bobsag3: nope only the 2 blue lights on the board, this is why I'm thinking it is dead
|
|
|
|
|