SeaSoul
|
|
July 25, 2014, 06:29:32 AM |
|
When on bittrex?
|
|
|
|
yellowduck2
|
|
July 25, 2014, 06:49:12 AM |
|
Cool but why is no one buying this valuable innovative coin? WHRL is seriously the best most power efficient algo even better than x11.
New algo without any special feature wouldn't make it in today market. In the past yes, now no. Look at fresh coin. New algo, with a bit more extra feature didn't even make it far. But, due to the efficiency and parity between AMD and Nvidia, won't that make more people want to mine it & therefore use it? Why was Litecoin adopted over Bitcoin? The algorithm. If people want to mine it, people will want to buy it. I think it's just a matter of time untill it starts being traded The market condition in the past few months and now is totally different. U can't use litecoin for comparison. The market condition then and now is totally totally different.
|
|
|
|
unitedminers
|
|
July 25, 2014, 08:18:40 AM Last edit: July 25, 2014, 10:04:23 AM by unitedminers |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint
|
|
|
|
HashCookie
Newbie
Offline
Activity: 6
Merit: 0
|
|
July 25, 2014, 01:24:04 PM |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint Strange, usually that problem is to do more with internet than miners - do the rejects stop after a while?
|
|
|
|
DrSnAzZy
Member
Offline
Activity: 112
Merit: 10
VootCoin PR/IRC Admin
|
|
July 25, 2014, 03:23:26 PM |
|
Very pleased with what i have mined with my rig ALGO IS AWESOME!
|
Vootcoin!
|
|
|
unitedminers
|
|
July 25, 2014, 03:53:43 PM |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint Strange, usually that problem is to do more with internet than miners - do the rejects stop after a while? Now at Suprnova and the same settings I get 0% rejects with the newest ccMiner and about 0,0-0,3% (only 1 GPU at 5% but decreasing) with the newest SPH-SGMiner BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet
|
|
|
|
whirlcoin (OP)
|
|
July 25, 2014, 04:06:45 PM |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint Strange, usually that problem is to do more with internet than miners - do the rejects stop after a while? Now at Suprnova and the same settings I get 0% rejects with the newest ccMiner and about 0,0-0,3% (only 1 GPU at 5% but decreasing) with the newest SPH-SGMiner BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet What happens when you try to run the Mac wallet? I only had my vm to test it in and it works there...
|
|
|
|
dudupang
|
|
July 25, 2014, 04:10:31 PM |
|
Cool but why is no one buying this valuable innovative coin? WHRL is seriously the best most power efficient algo even better than x11.
There are also ICB and FRSH and X14, dont know which one is the best.
|
|
|
|
unitedminers
|
|
July 25, 2014, 04:37:06 PM Last edit: July 25, 2014, 07:44:05 PM by unitedminers |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint Strange, usually that problem is to do more with internet than miners - do the rejects stop after a while? Now at Suprnova and the same settings I get 0% rejects with the newest ccMiner and about 0,0-0,3% (only 1 GPU at 5% but decreasing) with the newest SPH-SGMiner BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet What happens when you try to run the Mac wallet? I only had my vm to test it in and it works there... I get a massage which says something like "Can not open or start Whirlcoin-qt. Do you want to send a report to Apple?". It's just a small pop up and looks very similar to the massage "not trusted app" but it's a different massage. I'm currently not at my MacBook. Xubuntu only Edit: Back on my Mac Process: WhirlCoin-Qt [353] Path: /Applications/WhirlCoin-Qt.app/Contents/MacOS/WhirlCoin-Qt Identifier: org.whirlcoin.app Version: $VERSION ($VERSION) Code Type: X86-64 (Native) Parent Process: launchd [130] User ID: 501
Date/Time: 2014-07-25 19:52:11.812 +0200 OS Version: Mac OS X 10.8.5 (12F45) Report Version: 10
Interval Since Last Report: 6008736 sec Crashes Since Last Report: 17 Per-App Crashes Since Last Report: 3 Anonymous UUID: 6108B44-96AC-059-G7SA-1CD02B07A20
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information: dyld: launch, loading dependent libraries
Dyld Error Message: Library not loaded: /opt/local/lib/*/libdb_cxx-4.8.dylib Referenced from: /Applications/WhirlCoin-Qt.app/Contents/MacOS/WhirlCoin-Qt Reason: image not found
Binary Images: 0x107740000 - 0x107b13fff +org.whirlcoin.app ($VERSION - $VERSION) <014D9C20-C01E-39F2-AC7C-93FF6C4A871A> /Applications/WhirlCoin-Qt.app/Contents/MacOS/WhirlCoin-Qt 0x107c7a000 - 0x107cc0ff7 +libssl.1.0.0.dylib (0) <BAB5B5BB-142B-3D2A-BDBE-D7821431FF79> /Applications/WhirlCoin-Qt.app/Contents/Frameworks/libssl.1.0.0.dylib 0x107cdb000 - 0x107e19fc7 +libcrypto.1.0.0.dylib (0) <0F3DFE3E-C0EF-3C6B-ADA7-3DC4D976F009> /Applications/WhirlCoin-Qt.app/Contents/Frameworks/libcrypto.1.0.0.dylib 0x7fff67340000 - 0x7fff6737493f dyld (210.2.3) <6900F2BA-DB48-3B78-B668-58FC0CF6BCB8> /usr/lib/dyld 0x7fff93c2a000 - 0x7fff93f89fff com.apple.Foundation (6.8 - 945.19) <C98E55BA-553B-314B-B056-849FFB20C220> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x7fff969ce000 - 0x7fff975fbfff com.apple.AppKit (6.8 - 1187.40) <F12CF463-6F88-32ED-9EBA-0FA2AD3CF576> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x7fff98a86000 - 0x7fff98a86fff com.apple.ApplicationServices (45 - 45) <A3ABF20B-ED3A-32B5-830E-B37831A45A80> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 25, 2014, 04:55:14 PM |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint Strange, usually that problem is to do more with internet than miners - do the rejects stop after a while? Now at Suprnova and the same settings I get 0% rejects with the newest ccMiner and about 0,0-0,3% (only 1 GPU at 5% but decreasing) with the newest SPH-SGMiner BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet What happens when you try to run the Mac wallet? I only had my vm to test it in and it works there... I get a massage which says something like "Can not open or start Whirlcoin-qt. Do you want to send a report to Apple?". It's just a small pop up and looks very similar to the massage "not trusted app" but it's a different massage. I'm currently not at my MacBook. Xubuntu only you really have problems everywhere...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Frizork
Member
Offline
Activity: 62
Merit: 10
|
|
July 25, 2014, 04:57:07 PM |
|
some news about bittrex?
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
July 25, 2014, 05:14:24 PM |
|
some news about bittrex?
no IPO no bittrex I think we should also try poloniex.
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
unitedminers
|
|
July 25, 2014, 06:00:14 PM Last edit: July 25, 2014, 07:39:07 PM by unitedminers |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint Strange, usually that problem is to do more with internet than miners - do the rejects stop after a while? Now at Suprnova and the same settings I get 0% rejects with the newest ccMiner and about 0,0-0,3% (only 1 GPU at 5% but decreasing) with the newest SPH-SGMiner BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet What happens when you try to run the Mac wallet? I only had my vm to test it in and it works there... I get a massage which says something like "Can not open or start Whirlcoin-qt. Do you want to send a report to Apple?". It's just a small pop up and looks very similar to the massage "not trusted app" but it's a different massage. I'm currently not at my MacBook. Xubuntu only you really have problems everywhere... And that's only what you know Do you have a DOGE Wallet address or a Reddit username?
|
|
|
|
Atrides
|
|
July 25, 2014, 10:08:35 PM |
|
BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet Mine directly to any exchange with DwarfPool (without any local wallet), just put your personal wallet id getting from exchange. We also support their requirements - autopayouts from 1 WHRL one time per hour. That is a favorite feature of our Monero-miners ))
|
|
|
|
whirlcoin (OP)
|
|
July 25, 2014, 10:32:12 PM |
|
Which pool do you prefer and what do you think about Hashharder or Suprnova? And what's your preferred cl file? whirlcoin.cl, whirlcoin_old.cl or wirlpool.cl? Is it common with the whirlcoin algo to get after a new start of ccMiner at the beginning about 55 rejects before first MHs gets accepted? My Nvidia GTX 750 Ti settings: #!/bin/sh
export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
cd /home/x/ccminer-djm34-0723
./ccminer -t 1 -a whirlcoin -o stratum+tcp://www.hashharder.com:9649 -u XXX -p X I get about 40% rejects with the newest ccMiner and about 25% with the newest SPH-SGMiner. THX for every hint Strange, usually that problem is to do more with internet than miners - do the rejects stop after a while? Now at Suprnova and the same settings I get 0% rejects with the newest ccMiner and about 0,0-0,3% (only 1 GPU at 5% but decreasing) with the newest SPH-SGMiner BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet What happens when you try to run the Mac wallet? I only had my vm to test it in and it works there... I get a massage which says something like "Can not open or start Whirlcoin-qt. Do you want to send a report to Apple?". It's just a small pop up and looks very similar to the massage "not trusted app" but it's a different massage. I'm currently not at my MacBook. Xubuntu only Edit: Back on my Mac Process: WhirlCoin-Qt [353] Path: /Applications/WhirlCoin-Qt.app/Contents/MacOS/WhirlCoin-Qt Identifier: org.whirlcoin.app Version: $VERSION ($VERSION) Code Type: X86-64 (Native) Parent Process: launchd [130] User ID: 501
Date/Time: 2014-07-25 19:52:11.812 +0200 OS Version: Mac OS X 10.8.5 (12F45) Report Version: 10
Interval Since Last Report: 6008736 sec Crashes Since Last Report: 17 Per-App Crashes Since Last Report: 3 Anonymous UUID: 6108B44-96AC-059-G7SA-1CD02B07A20
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information: dyld: launch, loading dependent libraries
Dyld Error Message: Library not loaded: /opt/local/lib/*/libdb_cxx-4.8.dylib Referenced from: /Applications/WhirlCoin-Qt.app/Contents/MacOS/WhirlCoin-Qt Reason: image not found
Binary Images: 0x107740000 - 0x107b13fff +org.whirlcoin.app ($VERSION - $VERSION) <014D9C20-C01E-39F2-AC7C-93FF6C4A871A> /Applications/WhirlCoin-Qt.app/Contents/MacOS/WhirlCoin-Qt 0x107c7a000 - 0x107cc0ff7 +libssl.1.0.0.dylib (0) <BAB5B5BB-142B-3D2A-BDBE-D7821431FF79> /Applications/WhirlCoin-Qt.app/Contents/Frameworks/libssl.1.0.0.dylib 0x107cdb000 - 0x107e19fc7 +libcrypto.1.0.0.dylib (0) <0F3DFE3E-C0EF-3C6B-ADA7-3DC4D976F009> /Applications/WhirlCoin-Qt.app/Contents/Frameworks/libcrypto.1.0.0.dylib 0x7fff67340000 - 0x7fff6737493f dyld (210.2.3) <6900F2BA-DB48-3B78-B668-58FC0CF6BCB8> /usr/lib/dyld 0x7fff93c2a000 - 0x7fff93f89fff com.apple.Foundation (6.8 - 945.19) <C98E55BA-553B-314B-B056-849FFB20C220> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x7fff969ce000 - 0x7fff975fbfff com.apple.AppKit (6.8 - 1187.40) <F12CF463-6F88-32ED-9EBA-0FA2AD3CF576> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x7fff98a86000 - 0x7fff98a86fff com.apple.ApplicationServices (45 - 45) <A3ABF20B-ED3A-32B5-830E-B37831A45A80> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices It becomes a little complex here, but what you need to do is find any other working Mac wallet, Ricky click and 'open package contents' on the executable, navigate to Frameworks and copy libdb_cxx-4.8.dylib to the same place in the whirlcoin app - I'll release a fix when I get back to my Mac
|
|
|
|
radus
|
|
July 25, 2014, 10:57:35 PM |
|
|
|
|
|
|
TheCoinFinder
Legendary
Offline
Activity: 938
Merit: 1001
|
|
July 26, 2014, 01:23:01 AM |
|
BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet Or use: Hashharder's OneKeyYou don't need a wallet to mine. And your coins aren't left on an exchange or on a pool. They are sent to your private address - even if you don't have a wallet. Your OneKey will mean that at some point in the future - you can import your private keys into your wallet, and have access to all your coins, securely. In one place. http://www.hashharder.com/whirl/whirlcoin
|
|
|
|
|
unitedminers
|
|
July 26, 2014, 07:15:51 AM |
|
BTW I couldn't try Dwarfpool because I don't have Windows, the Mac Wallet (OSX 10.8.5) doesn't work and there is no Linux Wallet Or use: Hashharder's OneKeyYou don't need a wallet to mine. And your coins aren't left on an exchange or on a pool. They are sent to your private address - even if you don't have a wallet. Your OneKey will mean that at some point in the future - you can import your private keys into your wallet, and have access to all your coins, securely. In one place. http://www.hashharder.com/whirl/whirlcoinThat's what I did in the first place but with R9 290s I get about 25% rejects and with 750 Ti about 40% rejects. With the same settings soft- and hardware I get at Suprnova nearly 0% rejects. https://bitcointalk.org/index.php?topic=679134.msg8021362#msg8021362
|
|
|
|
|