Airwhale
|
|
July 12, 2014, 09:53:22 AM |
|
I believe it is any intel style heatsink that can dissipate 120 watts of heat.
How do you figure that out from a specs sheet? As near as I can tell, you call the company's support line.
|
|
|
|
|
sorehammer
|
|
July 12, 2014, 06:21:36 PM |
|
Are the first lot of chips on the way bobsag3
|
|
|
|
bobsag3 (OP)
|
|
July 12, 2014, 06:22:28 PM |
|
Are the first lot of chips on the way bobsag3
They were shipped out late Friday night from HK direct to Marto EDIT: Keep an eye out on the OP, I will continue to add info and updates pretty much daily
|
|
|
|
sorehammer
|
|
July 12, 2014, 06:30:23 PM |
|
cheers side question The shipping I paid for my x1's and comp psu i bought could that be transferred to the thermaltake modular psu you sell as I won't be getting a x1 shipped.
|
|
|
|
kea808
Member
Offline
Activity: 115
Merit: 10
“Create Your Decentralized Life”
|
|
July 12, 2014, 06:54:16 PM |
|
Hope there's a hosting option for 4 boards.
|
|
|
|
y_boonstra
|
|
July 12, 2014, 08:10:02 PM |
|
@bobsag3, Things are moving along nicely! Thanks for providing this service I realise you are mad busy organising the group buy at the moment, so I'll just mention it here... I would like to push my spare 4 chips onto @y_boonstra. Is this possible and how/when should I do this? Bob do we get confirmation on these actions some ppl took (shifting chips). So we can finish this financialy.?
|
|
|
|
Qeu
|
|
July 12, 2014, 10:20:25 PM |
|
Are the first lot of chips on the way bobsag3
They were shipped out late Friday night from HK direct to Marto EDIT: Keep an eye out on the OP, I will continue to add info and updates pretty much daily Bobsag3, if we request a group buy assembly discount code, which exchange rate is used for the €4100 in my case for 25 boards, the bitpay one? Just to get an idea how much btc I need. Can we use outstanding international shipping from the converted X3, and the paid extra X3 PSU, into store credit for atx psu's?
|
|
|
|
sorehammer
|
|
July 12, 2014, 10:28:26 PM |
|
That's my concern also, paid 45 for psu and 69.99 for shipping my x1's asked to switch that to the $48 atx psu and have been told need a extra $20 to pay the maths don't add up.
|
|
|
|
Cortex7
|
|
July 13, 2014, 12:07:24 PM |
|
Hey guys, What do you think of this cooler, will it be able to shift enough heat? Notice it only has 2 heat pipes: CLICK FOR IMAGE
|
|
|
|
|
y_boonstra
|
|
July 13, 2014, 01:48:59 PM |
|
Hey guys, What do you think of this cooler, will it be able to shift enough heat? Notice it only has 2 heat pipes: CLICK FOR IMAGELooks good don't worry about the 2 heatpipes cause the chip itself is very small.
|
|
|
|
Cortex7
|
|
July 13, 2014, 01:54:48 PM |
|
I don't think it could shift 100W, you may have to run underclocked with that cooler. Boxing it up would be required in a busy lived in environment, especially with cats/kids etc. But it's better to leave it as open board in a safe unlived in area. Especially because TechnoBit board has a giant aluminium heatsink on its base, you want good clean airflow around that. I have a small spare room with a window and I'm going to rack the 12 boards up on shelf rails, the shelfs wont be like book shelves, they will not have a solid board base, they will be pairs of horizontal rails onto which the boards are fastened for better air circulation.
|
|
|
|
Cortex7
|
|
July 13, 2014, 02:01:50 PM |
|
Hey guys, What do you think of this cooler, will it be able to shift enough heat? Notice it only has 2 heat pipes: CLICK FOR IMAGELooks good don't worry about the 2 heatpipes cause the chip itself is very small. Thanks, OK I will probably use some. But to dissipate 100W and keep the die "cool" takes a lot of cooler. I may have to underclock on hot days , but can probably run 400 GH/s per board in the winter maybe, cheap electric heater even if it's not turning profit
|
|
|
|
sorehammer
|
|
July 13, 2014, 02:03:42 PM |
|
that cooler can shift 95w and I have kids but with some extra fans blowing in from the front and fans exhausting and a decent amount of gap between the board and back I believe that stock intel cooler will be more than enough for my needs plus will allow for a clean loolk.
|
|
|
|
Cortex7
|
|
July 13, 2014, 02:12:37 PM |
|
that cooler can shift 95w and I have kids but with some extra fans blowing in from the front and fans exhausting and a decent amount of gap between the board and back I believe that stock intel cooler will be more than enough for my needs plus will allow for a clean loolk. kids ... yeah box it! The extra fans to force cool the whole box sounds like a good idea.
|
|
|
|
sorehammer
|
|
July 13, 2014, 02:15:19 PM |
|
With kids around boxing is my only option got a 2 year old son who love my screw drivers
|
|
|
|
sorehammer
|
|
July 13, 2014, 03:10:53 PM |
|
Don't have any dimensions for them yet have asked.
|
|
|
|
sorehammer
|
|
July 13, 2014, 04:22:08 PM |
|
Bobsag3 when you get you samples can you let us know the board dimensions.
|
|
|
|
Qeu
|
|
July 13, 2014, 09:18:17 PM |
|
Now that I have a discount code, where to apply it, I am stuck at technobit asking for shipping carrier and tracking #, and I can't find the boards/group buy at minersource?
|
|
|
|
|