|
marto74
|
 |
September 15, 2014, 09:04:35 PM |
|
So this is our design fail.
As far we were using the intel 1150 adapter of the freezer we missed that the outer edge dim is for 2011.
So I look over the coolers.
The intel stock ones will need 4 small brackets and Zelman and ice edge types ( AMD standrt attachment) will need modified brackets , that is easier.
I'm going to get samples in the morning in order to check adapting parts
|
|
|
|
|
|
|
|
|
|
|
Be very wary of relying on JavaScript for security on crypto sites. The site can change the JavaScript at any time unless you take unusual precautions, and browsers are not generally known for their airtight security.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
sorehammer
|
|
September 15, 2014, 09:07:07 PM |
|
Marto shit happens you still have done a great job with these boards.
|
|
|
|
|
Qeu
|
|
September 15, 2014, 09:42:01 PM |
|
So this is our design fail.
As far we were using the intel 1150 adapter of the freezer we missed that the outer edge dim is for 2011.
So I look over the coolers.
The intel stock ones will need 4 small brackets and Zelman and ice edge types ( AMD standrt attachment) will need modified brackets , that is easier.
I'm going to get samples in the morning in order to check adapting parts
We may be able to do without for the standard intel ones, I can bent those push-pin holders easily a couple of mm to get to 80mm. Hope you can fit one on a board and save on extra work. The deepcool ice edge mini fs has an intel 115x plastic mount with push-pins only, but a metal frame that screws on to that and holds the sink. So who sells loose amd cooler sockets... |
|
|
|
|
|
dogjunior
|
|
September 15, 2014, 09:54:55 PM |
|
So this is our design fail.
As far we were using the intel 1150 adapter of the freezer we missed that the outer edge dim is for 2011.
So I look over the coolers.
The intel stock ones will need 4 small brackets and Zelman and ice edge types ( AMD standrt attachment) will need modified brackets , that is easier.
I'm going to get samples in the morning in order to check adapting parts
We may be able to do without for the standard intel ones, I can bent those push-pin holders easily a couple of mm to get to 80mm. Hope you can fit one on a board and save on extra work. The deepcool ice edge mini fs has an intel 115x plastic mount with push-pins only, but a metal frame that screws on to that and holds the sink. So who sells loose amd cooler sockets... Marto correct me if I am wrong but the intel 1150x sits too low for your board without the 4 small brackets to raise them? I remember him saying that the BA chip is thicker than a intel chip? |
|
|
|
|
nexus99
Legendary
 Offline
Activity: 910
Merit: 1000
|
|
September 15, 2014, 10:34:29 PM |
|
Heres some pics of what we got:  Problem though. Although the board advertises that it will work with all intel 1150 coolers, it does not. We have tried several coolers so far, and none fit into the mounting holes on the board, or the weird metal brackets included. Crossing my fingers that 3 of those are mine!!!! |
|
|
|
|
|
Cortex7
|
|
September 15, 2014, 11:30:58 PM
Last edit: September 16, 2014, 12:20:18 AM by Cortex7 |
|
You can leave the sheet metal brackets on for me.
What about other European GroupBuy1 orders? Estimated shipping?
|
|
|
|
|
|
Scrappy Do
|
|
September 15, 2014, 11:58:04 PM |
|
So this is our design fail.
As far we were using the intel 1150 adapter of the freezer we missed that the outer edge dim is for 2011.
So I look over the coolers.
The intel stock ones will need 4 small brackets and Zelman and ice edge types ( AMD standrt attachment) will need modified brackets , that is easier.
I'm going to get samples in the morning in order to check adapting parts
No parts needed. I ordered exactly what you said, over $4k dollars in fans, and they collectiong dust. Please update me on my order status. Marto, I want to believe, but as I was one of the first to send chips, I need to start seeing results please!  |
|
|
|
|
bboerst
Newbie
Offline
Activity: 18
Merit: 0
|
|
September 16, 2014, 12:42:31 AM |
|
Marto - Can you please give us an update on sending the customer list to Minersource for batch 1 customers? I asked this same question almost 24 hours ago and it went unanswered. Please let us know where you are at with this list because these delays are really hurting our ROI on these boards.
|
|
|
|
|
btmtb
Sr. Member
Offline
Activity: 291
Merit: 250
Scam-Busting PSA: Beware of Black Arrow Software
|
|
September 16, 2014, 10:38:33 AM |
|
So this is our design fail.
As far we were using the intel 1150 adapter of the freezer we missed that the outer edge dim is for 2011.
So I look over the coolers.
The intel stock ones will need 4 small brackets and Zelman and ice edge types ( AMD standrt attachment) will need modified brackets , that is easier.
I'm going to get samples in the morning in order to check adapting parts
We may be able to do without for the standard intel ones, I can bent those push-pin holders easily a couple of mm to get to 80mm. Hope you can fit one on a board and save on extra work. The deepcool ice edge mini fs has an intel 115x plastic mount with push-pins only, but a metal frame that screws on to that and holds the sink. So who sells loose amd cooler sockets... I'm also sat on a little pile of Intel coolers and this is making me a little nervous, but not as nervous as not knowing where I am in the queue (Batch1, direct within EU, x2). Can you keep us updated with some pics if you get yours to fit Qeu? |
|
|
|
|
|
Qeu
|
|
September 16, 2014, 10:53:44 AM |
|
So this is our design fail.
As far we were using the intel 1150 adapter of the freezer we missed that the outer edge dim is for 2011.
So I look over the coolers.
The intel stock ones will need 4 small brackets and Zelman and ice edge types ( AMD standrt attachment) will need modified brackets , that is easier.
I'm going to get samples in the morning in order to check adapting parts
We may be able to do without for the standard intel ones, I can bent those push-pin holders easily a couple of mm to get to 80mm. Hope you can fit one on a board and save on extra work. The deepcool ice edge mini fs has an intel 115x plastic mount with push-pins only, but a metal frame that screws on to that and holds the sink. So who sells loose amd cooler sockets... I'm also sat on a little pile of Intel coolers and this is making me a little nervous, but not as nervous as not knowing where I am in the queue (Batch1, direct within EU, x2). Can you keep us updated with some pics if you get yours to fit Qeu? Sure I will, but since Bobsag3 tried the standard Intel one and said it doesn't fit, it may be better to report to Marto right away and get an adaption fix sent with your miners. Plus I don't think I will see the miners this week, or sooner than you will see yours, nobody in EU seems to have his order marked as shipped. |
|
|
|
|
MoneyMuscles
Member
Offline
Activity: 94
Merit: 10
|
|
September 16, 2014, 02:31:00 PM |
|
Are we still just on batch 1?
|
|
|
|
|
|
Cortex7
|
|
September 16, 2014, 02:41:07 PM |
|
I'm an EU batch1 order and my TechnoBit status just changed to shipped.  |
|
|
|
|
|
sorehammer
|
|
September 16, 2014, 02:54:36 PM |
|
great news Cortex7
|
|
|
|
kea808
Member
Offline
Activity: 115
Merit: 10
“Create Your Decentralized Life”
|
|
September 16, 2014, 04:00:38 PM |
|
Going by the image you have posted Bobsag3 that mount looks like they have gone with a AMD cooler mounting system as AMD only use one screw on either side not four like Intel.
No this sheetmetal bracket is to fix height diference with the original Freezer plastic holder. Yours is with bended sheetmetal and cutted in two plastic holder. WE came out with this , because cuting and bending of the original parts can lead to some troubles. All Arctic intel coolers are fitting here if you remove the brackets , you should just correct the height There is a HUGE difference between what is posted on your site : "Intel socet 1150 compatible coller for each chip top" and "All Arctic intel coolers" We have tried several zalman and intel stock coolers, not a single one works. height? Give me the exact model you choose and I'll will get one localy and make adapter for you Intel E97378-001 |
|
|
|
|
y_boonstra
|
|
September 16, 2014, 04:44:44 PM |
|
Im EU B1. And my status says shipped
|
|
|
|
|
btmtb
Sr. Member
Offline
Activity: 291
Merit: 250
Scam-Busting PSA: Beware of Black Arrow Software
|
|
September 16, 2014, 08:03:53 PM |
|
Im EU B1. And my status says shipped
Awesome, mine too a couple of hours ago, cheers Martin. Can I chime in for adapters too, I've got a stash on the Intel heatsinks if you need any photos or measurements? |
|
|
|
|
|
marto74
|
|
September 16, 2014, 08:22:51 PM |
|
Im EU B1. And my status says shipped
Awesome, mine too a couple of hours ago, cheers Martin. Can I chime in for adapters too, I've got a stash on the Intel heatsinks if you need any photos or measurements? please do |
|
|
|
|
Qeu
|
|
September 16, 2014, 08:41:15 PM |
|
Marto are you behind in shipping (you said last week you would ship me Friday or last Monday) or in updating our technobit accounts to "shipped" status?
|
|
|
|
|
|
marto74
|
|
September 16, 2014, 08:44:28 PM |
|
Marto are you behind in shipping (you said last week you would ship me Friday or last Monday) or in updating our technobit accounts to "shipped" status?
We ship as soon we have ready boards. your order ref ? |
|
|
|
|
marto74
|
|
September 16, 2014, 11:34:34 PM |
|
Marto are you behind in shipping (you said last week you would ship me Friday or last Monday) or in updating our technobit accounts to "shipped" status?
We ship as soon we have ready boards. your order ref ? Please quit dodging the question, do you have a list for minersource ready or not? yes |
|
|
|
|
