mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 02, 2014, 04:38:44 PM |
|
I will be updating my thread today (finally) but also wanted to post a quick update. Currently I have 3 PSU breakout boards to design cases for...first up is the 2x J4bberwock Mods boards then onto the DPS750 board I recently got on a trade Also catching up on some print orders over the next couple days while developing the cases. I will be answering PMs this afternoon. Apologies for the wait. Thanks all!
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
October 02, 2014, 05:07:10 PM |
|
Not a problem I know how busy you are. I am glad it is all coming together for you. You do great work. My BA Breakout Board cover saved me a shock a couple days ago. I stumbled at my bench and my hand went right on the board. If the case had not been there I would have had a nasty shock that would have been worse because of my spinal cord stimulator implant. I am glad you make these things. I will be updating my thread today (finally) but also wanted to post a quick update. Currently I have 3 PSU breakout boards to design cases for...first up is the 2x J4bberwock Mods boards then onto the DPS750 board I recently got on a trade Also catching up on some print orders over the next couple days while developing the cases. I will be answering PMs this afternoon. Apologies for the wait. Thanks all!
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4270
Merit: 8668
'The right to privacy matters'
|
|
October 02, 2014, 11:22:18 PM |
|
Still waiting on my antminer psu switches. you should have six of them let me know when you have built a printed case for them.
thanks phil
|
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 13, 2014, 02:08:12 AM |
|
New style (100 Gh/s) R-Box Stacker Clips available for purchase These slip onto the R-Box miner and can be zip-tied together (or other means of securing) 1 pair of stackers will work for 2 R-Box miners although I recommend 2x stacker sets so the bottom R-Box has better airflow.
|
|
|
|
bdangles
Member
Offline
Activity: 100
Merit: 10
|
|
October 16, 2014, 03:46:31 AM |
|
I don't have the dimensions yet (I will when it arrives), but I think the base of the black cylinders are like 1.5cm and its about 3cm tall. How much would it cost to print one of those black cylinders with a smily face like " " on the top of it?
|
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 16, 2014, 04:31:09 AM |
|
I don't have the dimensions yet (I will when it arrives), but I think the base of the black cylinders are like 1.5cm and its about 3cm tall. How much would it cost to print one of those black cylinders with a smily face like " " on the top of it? I am sure I could hook you up for ~$15 shipped (or less). Shoot me (or post) specs and lets boogie!
|
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 16, 2014, 06:23:16 PM |
|
|
|
|
|
J4bberwock
|
|
October 16, 2014, 07:37:22 PM |
|
I think I'll have some more things to ask you to print for me later.
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
|
October 16, 2014, 07:42:38 PM |
|
|
node-vps.com - Tron / Masternode hosting services
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 16, 2014, 07:45:11 PM |
|
I think I'll have some more things to ask you to print for me later. I should have the case for your XL boards ready in a couple days...I am healing up from a mishap I had with a DPS750 PSU fan, ugh...gashed my thumb pretty good. The base is pretty much set, just gotta add board securing holes and finish up the lid. For some reason due to the tolerances that these printers print, getting the parts to interface just right is a bit tricky and I am very critical of my own work.
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
|
October 16, 2014, 07:51:12 PM |
|
I think I'll have some more things to ask you to print for me later. I should have the case for your XL boards ready in a couple days...I am healing up from a mishap I had with a DPS750 PSU fan, ugh...gashed my thumb pretty good. The base is pretty much set, just gotta add board securing holes and finish up the lid. For some reason due to the tolerances that these printers print, getting the parts to interface just right is a bit tricky and I am very critical of my own work. do you have a box for j4bberwocks dps-2000 ??
|
node-vps.com - Tron / Masternode hosting services
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 16, 2014, 08:32:27 PM |
|
I think I'll have some more things to ask you to print for me later. I should have the case for your XL boards ready in a couple days...I am healing up from a mishap I had with a DPS750 PSU fan, ugh...gashed my thumb pretty good. The base is pretty much set, just gotta add board securing holes and finish up the lid. For some reason due to the tolerances that these printers print, getting the parts to interface just right is a bit tricky and I am very critical of my own work. do you have a box for j4bberwocks dps-2000 ?? Very soon...once I finish up the first 2 J4bberwock Mods cases, I will be getting one of his DPS2k's very quickly...I'd say in the next 4 weeks I might have something ready, maybe sooner if I can kick it up a notch but I've a trip scheduled to drive my old VW bus back from the midwest.
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
|
October 16, 2014, 08:38:04 PM |
|
I think I'll have some more things to ask you to print for me later. I should have the case for your XL boards ready in a couple days...I am healing up from a mishap I had with a DPS750 PSU fan, ugh...gashed my thumb pretty good. The base is pretty much set, just gotta add board securing holes and finish up the lid. For some reason due to the tolerances that these printers print, getting the parts to interface just right is a bit tricky and I am very critical of my own work. do you have a box for j4bberwocks dps-2000 ?? Very soon...once I finish up the first 2 J4bberwock Mods cases, I will be getting one of his DPS2k's very quickly...I'd say in the next 4 weeks I might have something ready, maybe sooner if I can kick it up a notch but I've a trip scheduled to drive my old VW bus back from the midwest. ok, then ill like to order 2 when they are done :-p
|
node-vps.com - Tron / Masternode hosting services
|
|
|
J4bberwock
|
|
October 16, 2014, 08:48:25 PM |
|
I think I'll have some more things to ask you to print for me later. I should have the case for your XL boards ready in a couple days...I am healing up from a mishap I had with a DPS750 PSU fan, ugh...gashed my thumb pretty good. The base is pretty much set, just gotta add board securing holes and finish up the lid. For some reason due to the tolerances that these printers print, getting the parts to interface just right is a bit tricky and I am very critical of my own work. Yeah, sometimes, fans are hungry. I've got one scythe Ultrakaze that bit hard on one of my fingers too when modding one Gridseed Blade. As for the DPS 2000 BB and the DPS 1200 FBA, I have them back in stock, so I'll prepare a package for you soon. I just wanted to add the antminer control board once the first prototype is functionnal. Hopefully, I'll receive the new PCB next week.
|
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 16, 2014, 09:18:17 PM |
|
I think I'll have some more things to ask you to print for me later. I should have the case for your XL boards ready in a couple days...I am healing up from a mishap I had with a DPS750 PSU fan, ugh...gashed my thumb pretty good. The base is pretty much set, just gotta add board securing holes and finish up the lid. For some reason due to the tolerances that these printers print, getting the parts to interface just right is a bit tricky and I am very critical of my own work. Yeah, sometimes, fans are hungry. I've got one scythe Ultrakaze that bit hard on one of my fingers too when modding one Gridseed Blade. As for the DPS 2000 BB and the DPS 1200 FBA, I have them back in stock, so I'll prepare a package for you soon. I just wanted to add the antminer control board once the first prototype is functionnal. Hopefully, I'll receive the new PCB next week. Awesome, thanks so much! Yeah I should have your package ready within a couple weeks, I wanna make sure to hook you up with some extras since I will be shipping a package across the pond, haha I am anxious to see your antminer control board as I've been following the progress as much as I can, very nice bro!
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
October 16, 2014, 09:39:27 PM |
|
Great work on the AntSwitch cases! I am also looking forward to seeing what you can do in metal that rules. Keep up the great work.
|
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
October 27, 2014, 12:12:27 AM |
|
Just a quick update...I am still out of town and have very little net access (let alone cell service) and should be home in another week or so (tops) but wanted to let everyone know I am doing okay and will be getting back to work on my projects asap. Thanks for your continued patience.
~MS
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
October 27, 2014, 01:50:37 AM |
|
Glad to hear you are doing ok. :-) Just a quick update...I am still out of town and have very little net access (let alone cell service) and should be home in another week or so (tops) but wanted to let everyone know I am doing okay and will be getting back to work on my projects asap. Thanks for your continued patience.
~MS
|
|
|
|
mstrongbow (OP)
Sr. Member
Offline
Activity: 322
Merit: 250
3D Printed!
|
|
November 17, 2014, 05:56:23 PM |
|
Now available...High density, x-ray shielding filament for those extra-ordinary 3d prints! http://gmass.turnermedtech.com/Totally stoked about all the new filament materials coming out!
|
|
|
|
|