[WTS] Custom server PSU breakout boards, 1200w, 1300w, 2000w, 2880w, 4kw

[biggzi]

Put me down for 10 shipped to the UK.

Please send me total price including cables.

When are you hopping to have these ready to ship out?

Thanks.

[J4bberwock]

Put me down for 10 shipped to the UK.

Please send me total price including cables.

When are you hopping to have these ready to ship out?

Thanks.

Hi,
I miss a few screw terminals that should arrive within 1 or 2 days.
Cables will be delivered tomorrow.
Let's say that they will ship by the end of the week.

Edit
Each board can handle 6x 16 AWG 6 pins PCI-E cable.

XL version of the board available with up to 14x 6 pins PCI-E cables.

Price for 10 boards, 50 cables (5 free ones included), shipping via Registered small packet or UPS (usually 2-3 days delivery):
384$
0.75BTC at the current BTC-E price.

Send me your shipping address in PM, and I'll reply with the payment details.

[biggzi]

Sorry something I should have asked about before...

I assume the included cables will be 16 AWG?

Also I want to power 3 x S3's off each unit. So will need 6 x PCI-E cables. I know you mention crimp terminals would this safely handle 3 x S3's without overheating the connections. I would also need the extra PCI-E cables to be included in the order.

Thanks.

[J4bberwock]

Sorry something I should have asked about before...

I assume the included cables will be 16 AWG?

Also I want to power 3 x S3's off each unit. So will need 6 x PCI-E cables. I know you mention crimp terminals would this safely handle 3 x S3's without overheating the connections. I would also need the extra PCI-E cables to be included in the order.

Thanks.

yes, they are 16 AWG cables, I received them 3 hours ago.
The crimp terminals are rated at 16 amps each, there will be 3 crimp terminals for 2 cables, so 48A of capacity.
Each PCI-E cables will draw 1300/6/12= 18A (max of the PSU), so 36A for 2 cables
Anyway, your S3 is stated as 360W at the wall, it will be less than 15A on each cable.

Safety margin is at least 25% if you max out the PSU and use all the screw terminals.

The screw terminals should also accept 2 wires, 16 AWG, this way, I won't need the crimp terminals.
I'm currently checking this point.

EDIT
No need to worry about the crimp terminals, I can fit 2x 16AWG wires in the screw terminals on the board.
6 PCI-E cables on each board will work with no trouble for you.

10 extra cables will add 0.05BTC,
It will also be in another weight range for shipping, I'll go for fedex/UPS/DHL for the same price..

[J4bberwock]

Sorry something I should have asked about before...

I assume the included cables will be 16 AWG?

Also I want to power 3 x S3's off each unit. So will need 6 x PCI-E cables. I know you mention crimp terminals would this safely handle 3 x S3's without overheating the connections. I would also need the extra PCI-E cables to be included in the order.

Thanks.

Your order is ready to ship.
10 boards with cables already attached since I tested them.
You can pay using BTC (escrow is ok if you want to pay the fees) or paypal.
0.80BTC, 265£, 410us$

[J4bberwock]

Still waiting for news from biggzi and Berliner-Bitcoin-Mining 

So the boards that were made for them are available for sale, and each board already have 6 PCI-E cables attached that I used to test them electrically.

New XL board with up to 14 PCI-E cables available.
Pics soon.

[mstrongbow]

How much for 1 board shipped to US west coast?
Thanks!

Edit: just reread the OP, shoot me a PM, I'd like to order one of these so I can design a safety enclosure for them.
Thanks and cheers mate!

[J4bberwock]

How much for 1 board shipped to US west coast?
Thanks!

Edit: just reread the OP, shoot me a PM, I'd like to order one of these so I can design a safety enclosure for them.
Thanks and cheers mate!

I'll send you one of std and XL design.

[mstrongbow]

How much for 1 board shipped to US west coast?
Thanks!

Edit: just reread the OP, shoot me a PM, I'd like to order one of these so I can design a safety enclosure for them.
Thanks and cheers mate!

I'll send you one of std and XL design.

Awesome! Shoot me a payment address mate.

Also, where can I pick up a PSU for these? The PSU will help with designing the case for best fitment and I can possibly use the PSU for a miner or two.

Thanks again!

[J4bberwock]

You got PM, give me your postal address, I'll check the delivery price.

I updated the OP with serial numbers for the PSU, they are often selling for 20$ on ebay on your side of the sea.

That makes a very cheap 1300w reliable PSU.

[mstrongbow]

You got PM, give me your postal address, I'll check the delivery price.

I updated the OP with serial numbers for the PSU, they are often selling for 20$ on ebay on your side of the sea.

That makes a very cheap 1300w reliable PSU.

Sweet! Working out a deal for 2x boards +shipping (1 of each style) on trade for 10x ea. style board safety enclosure shipped to J4bberwock 
Thanks mate!

[mstrongbow]

Alright, I've got 2x PSU's ordered for my 2 breakout boards. Stoked!
Now back to work on the DPS800GA breakout board cases!

[area3121]

are this PSU + breakout board + 16 awg cables available?? and how many Pcie cable can run trough break out board?

can you please break down the price for me to decide? thank you

and im ordering 7 pcs HP DPS-1200FBA + 7 pcs breakoutboard + all cables

HP DPS-1200FBA  ( 438202-001, 440785-001, 441830-001 )

[Ortek]

Hello, i would like to order 2 standard boards. Needs to be shipped to Germany. Can i pay with btc?
PSU: 406421-001

[J4bberwock]

Hello, i would like to order 2 standard boards. Needs to be shipped to Germany. Can i pay with btc?
PSU: 406421-001

I replied to your PM

[mstrongbow]

Finally home. Got my boards and the PSU's were waiting here as well.

I gotta say, these look great man! Looking forward to designing and printing safety enclosures for these guys.
Stoked! Thanks mate and I will keep your thread updated.

[J4bberwock]

I've got a custom order for the DPS-2000 BB, so added it to the available for order.
Still a few in stock.

here is the DPS 2000-BB with 6 fans headers to allow 3 fans to be installed on each side in push/pull setup.

[J4bberwock]

And here is the DPS-1200 FB Common Slot board

[CHAOSiTEC]

I've got a custom order for the DPS-2000 BB, so added it to the available for order.
Still a few in stock.

here is the DPS 2000-BB with 6 fans headers to allow 3 fans to be installed on each side in push/pull setup.

ill take 2 of these off your hands :-)

[area3121]

do you also sell dps 2000bb>