CLOSED

[qiuness]

af i installed the script on 3 machines to test it out. So far it works great
There are 2 things i was wondering:

1. how i can centrally see all my machines. I have 15 machines in a remote location pulling data... I need to somehow centralize that data and be able to see from Home if i have any issues with my miners
2. Can you make it that you don't specify the BAT/lnk file to your cgminer cfg in the akbash cfg? For example it would be perfect if you could specify the cfg in the run command of akbash (akbash.exe ltc.conf -cfg xxxx.bat). This way LTC hashers can switch pools/coins easier instead of changing the cfg location in your script every time they chagen pools.

Thanks

[1713514510]

1713514510

[1713514510]

1713514510

[1713514510]

1713514510

[1713514510]

1713514510

[1713514510]

1713514510

[netMonet]

I am running akbash since I started mining.
During the trial and error of selecting components of my system, akbash was reporting what is wrong remotely via e-mail.
It is an indispensable tool.

I am looking forward to try new version.

Thanks af_newbie!

[crazyates]

Using Akbash on Win PE, and it's working great. Thanks for all your hard work!

[amuk]

I'm on Comcast/Xfinity as my internet provider. They block port 25, so Akbash can't send email. Changing internet providers is not currently a reasonable option for me. If Akbash could send email via SMTP through port 587 then the email function would work for me.  Please add an option to allow choice of which port to send email.

Thanks so much for an awesome tool!

[Alyce]

 Hello.
Thank you for that software.
I setup it on the windows 7 x64 with 7950 and everything work ok.
But when i try install it on other windows 7 x64 with 7750 - something wrong.
This is the part of log.txt

07/31/13 10:57:15 0x0d8c INF adlPollingThread(): woke up, time to check ADL library

07/31/13 10:57:15 0x0d8c DBG adl_open(): atiadlxy.dll loaded ok

07/31/13 10:57:15 0x0d8c DBG refreshADLInfo(): reading temperature, fan speed and gpu utilization...

07/31/13 10:57:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 0, id: 52201152, ADL rc: -1

07/31/13 10:57:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 1, id: 52201152, ADL rc: -1

07/31/13 10:57:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 2, id: 52201152, ADL rc: -1

07/31/13 10:57:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 3, id: 52201152, ADL rc: -1

07/31/13 10:57:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 4, id: 52201152, ADL rc: -1

07/31/13 10:57:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 5, id: 52201152, ADL rc: -1

07/31/13 10:57:15 0x0d8c INF refreshADLInfo(): min GPU utilization: 99%, max GPU temperature: 63C

07/31/13 10:57:15 0x0d8c DBG adlPollingThread(): ADL H/W reading done, status: ADL_STATUS_CLOSED

07/31/13 10:57:38 0x093c DBG minerApiThread(): woke up; checking miner status...

07/31/13 10:57:38 0x093c DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1375253858,"Code":11,"Msg":"Summary","Description":"cgminer 3.3.1"}],"SUMMARY":[{"Elapsed":112,"MHS av":0.14,"Found Blocks":0,"Getworks":5,"Accepted":6,"Rejected":0,"Hardware Errors":0,"Utility":3.23,"Discarded":4,"Stale":0,"Get Failures":0,"Local Work":18,"Remote Failures":0,"Network Blocks":1,"Total MH":15.9089,"Work Utility":126.44,"Difficulty Accepted":224.00000000,"Difficulty Rejected":0.00000000,"Difficulty Stale":0.00000000,"Best Share":1658}],"id":1}

07/31/13 10:57:38 0x093c DBG minerApiThread(): miner status: ALIVE

07/31/13 10:57:43 0x1364 DBG monitorThread(): max gpu temperature (63C) stays below defined threshold (86C)

07/31/13 10:57:43 0x1364 DBG monitorThread(): all GPU fans appear to be functional

07/31/13 10:57:43 0x1364 DBG monitorThread(): GPU (lowest) mining utilization: 99% is higher than threshold: 20%

07/31/13 10:58:08 0x093c DBG minerApiThread(): woke up; checking miner status...

07/31/13 10:58:08 0x093c DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1375253888,"Code":11,"Msg":"Summary","Description":"cgminer 3.3.1"}],"SUMMARY":[{"Elapsed":142,"MHS av":0.14,"Found Blocks":0,"Getworks":6,"Accepted":11,"Rejected":0,"Hardware Errors":0,"Utility":4.65,"Discarded":6,"Stale":0,"Get Failures":0,"Local Work":22,"Remote Failures":0,"Network Blocks":1,"Total MH":20.2035,"Work Utility":155.55,"Difficulty Accepted":384.00000000,"Difficulty Rejected":0.00000000,"Difficulty Stale":0.00000000,"Best Share":1658}],"id":1}

07/31/13 10:58:08 0x093c DBG minerApiThread(): miner status: ALIVE

07/31/13 10:58:13 0x1364 DBG monitorThread(): max gpu temperature (63C) stays below defined threshold (86C)

07/31/13 10:58:13 0x1364 DBG monitorThread(): all GPU fans appear to be functional

07/31/13 10:58:13 0x1364 DBG monitorThread(): GPU (lowest) mining utilization: 99% is higher than threshold: 20%

07/31/13 10:58:15 0x0d8c INF adlPollingThread(): woke up, time to check ADL library

07/31/13 10:58:15 0x0d8c DBG adl_open(): atiadlxy.dll loaded ok

07/31/13 10:58:15 0x0d8c DBG refreshADLInfo(): reading temperature, fan speed and gpu utilization...

07/31/13 10:58:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 0, id: 52201152, ADL rc: -1

07/31/13 10:58:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 1, id: 52201152, ADL rc: -1

07/31/13 10:58:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 2, id: 52201152, ADL rc: -1

07/31/13 10:58:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 3, id: 52201152, ADL rc: -1

07/31/13 10:58:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 4, id: 52201152, ADL rc: -1

07/31/13 10:58:15 0x0d8c ERR refreshADLInfo(): failed to read fan speed on gpu: 0, bus: 11, index: 5, id: 52201152, ADL rc: -1

07/31/13 10:58:15 0x0d8c INF refreshADLInfo(): min GPU utilization: 99%, max GPU temperature: 65C

07/31/13 10:58:15 0x0d8c DBG adlPollingThread(): ADL H/W reading done, status: ADL_STATUS_CLOSED

07/31/13 10:58:38 0x093c DBG minerApiThread(): woke up; checking miner status...

07/31/13 10:58:38 0x093c DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1375253918,"Code":11,"Msg":"Summary","Description":"cgminer 3.3.1"}],"SUMMARY":[{"Elapsed":172,"MHS av":0.14,"Found Blocks":0,"Getworks":6,"Accepted":12,"Rejected":0,"Hardware Errors":0,"Utility":4.18,"Discarded":6,"Stale":0,"Get Failures":0,"Local Work":24,"Remote Failures":0,"Network Blocks":1,"Total MH":24.3610,"Work Utility":146.52,"Difficulty Accepted":416.00000000,"Difficulty Rejected":0.00000000,"Difficulty Stale":0.00000000,"Best Share":1658}],"id":1}

07/31/13 10:58:38 0x093c DBG minerApiThread(): miner status: ALIVE

07/31/13 10:58:44 0x1364 DBG monitorThread(): max gpu temperature (65C) stays below defined threshold (86C)

07/31/13 10:58:44 0x1364 DBG monitorThread(): all GPU fans appear to be functional

07/31/13 10:58:44 0x1364 DBG monitorThread(): GPU (lowest) mining utilization: 99% is higher than threshold: 20%

07/31/13 10:58:44 0x1364 SVR monitorThread(): miner reported NO change in number of accepted shares (12) in the last 10 minutes; considered SICK ...

07/31/13 10:58:44 0x1364 SVR restartMiner(): killing miner process: 2084

07/31/13 10:58:44 0x1364 SVR killProcessByID(2084): process handle: 1656, TeminateProcess() returned rc: 1

07/31/13 10:58:44 0x1364 SVR restartMiner(): sleeping for 15 seconds before restarting a new miner...

07/31/13 10:58:59 0x1364 INF restartMiner(): ---------------------------------------------

07/31/13 10:58:59 0x1364 INF restartMiner(): old process ID: 2084

07/31/13 10:58:59 0x1364 INF restartMiner(): process name: cgminer.exe

07/31/13 10:58:59 0x1364 INF restartMiner(): starting new instance...

07/31/13 10:58:59 0x1364 INF restartMiner(): command line: start c:\Users\Albert\Desktop\start-gml.lnk

07/31/13 10:58:59 0x1364 INF send_smtp_restarted_msg(): attempting to send 'miner restarted' email notification.

07/31/13 10:58:59 0x1364 INF restartMiner(): sleeping for 30 seconds...

You may see that akbash restart miner and the reason is "miner reported NO change in number of accepted shares (12) in the last 10 minutes; considered SICK ..."

But in 10:57:38 - "Accepted":6
10:58:08 - "Accepted":11
10:58:38 - "Accepted":12

Please help me resolve this problem. Thanks.

[Alyce]

You may see that akbash restart miner and the reason is "miner reported NO change in number of accepted shares (12) in the last 10 minutes; considered SICK ..."

But in 10:57:38 - "Accepted":6
10:58:08 - "Accepted":11
10:58:38 - "Accepted":12

Please help me resolve this problem. Thanks.

Are you running version 1.0.10?  I thought I fixed this issue.
Post your config file (less pool info).

If this is happening using version 1.0.10, it is a bug.

BTW, you can disable the "last accepted shares" check by setting "miner-solo-mining" to 1 in the config file.

Yes, this is 1.0.10

Config from log file:

07/31/13 15:39:34 0x09c0 SVR main(): ----------- Starting -------------
07/31/13 15:39:34 0x09c0 SVR main(): akbash watchdog ver. 1.0.10 (akbash-gml.conf) - copyright (c) 2012 by Peter Moss
07/31/13 15:39:34 0x09c0 SVR main(): akbash started at: 07/31/2013 15:39:34
07/31/13 15:39:34 0x09c0 SVR main(): akbash exe name: akbash.exe
07/31/13 15:39:34 0x09c0 DBG main(): ---------------------------------
07/31/13 15:39:34 0x09c0 DBG main(): watchdog specific config entries:
07/31/13 15:39:34 0x09c0 DBG main(): ---------------------------------
07/31/13 15:39:34 0x09c0 DBG main(): wdog-logFile: c:\users\User\Documents\akbash\log.txt
07/31/13 15:39:34 0x09c0 DBG main(): wdog-log-file-size: 500000 [bytes]
07/31/13 15:39:34 0x09c0 DBG main(): wdog-log-level: 3
07/31/13 15:39:34 0x09c0 DBG main(): miner-number-of-restarts: 15
07/31/13 15:39:34 0x09c0 DBG main(): miner-alive-timeout: 120 [seconds]
07/31/13 15:39:34 0x09c0 DBG main(): miner-not-connected-timeout: 60 [seconds]
07/31/13 15:39:34 0x09c0 DBG main(): wdog-listen-ip: x.x.x.x
07/31/13 15:39:34 0x09c0 DBG main(): wdog-rig-name: Rig
07/31/13 15:39:34 0x09c0 DBG main(): wdog-listen-port: 80
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-remote-api: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-remote-help: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-remote-restart: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-remote-reboot: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-remote-getlog: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-remote-status: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-notification-emails: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-status-notifications: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-notifications-email-address: a@a.a
07/31/13 15:39:34 0x09c0 DBG main(): wdog-status-notification-frequency: 360 [minutes]
07/31/13 15:39:34 0x09c0 DBG main(): wdog-cutoff-temperature: 86 [deg. C]
07/31/13 15:39:34 0x09c0 DBG main(): wdog-cutoff-temperature-cooldown-period: 5 [minutes]
07/31/13 15:39:34 0x09c0 DBG main(): wdog-disable-hw-monitoring: 0
07/31/13 15:39:34 0x09c0 DBG main(): wdog-hw-monitoring-interval: 60 [seconds]
07/31/13 15:39:34 0x09c0 DBG main(): wdog-gpu-utilization-threshold: 20 [%]
07/31/13 15:39:34 0x09c0 DBG main(): wdog-gpu-utilization-timeout: 100 [seconds]
07/31/13 15:39:34 0x09c0 DBG main(): ------------------------------
07/31/13 15:39:34 0x09c0 DBG main(): miner specific config entries:
07/31/13 15:39:34 0x09c0 DBG main(): ------------------------------
07/31/13 15:39:34 0x09c0 DBG main(): miner-exe-full-path: c:\Users\user\Desktop\start-gml.lnk
07/31/13 15:39:34 0x09c0 DBG main(): miner-exe-name: cgminer.exe
07/31/13 15:39:34 0x09c0 DBG main(): miner-init-interval: 30 [seconds]
07/31/13 15:39:34 0x09c0 DBG main(): miner-gpu-avg-rate-threshold: 0.10 [Mh/s]
07/31/13 15:39:34 0x09c0 DBG main(): miner-pga-avg-rate-threshold: 0.00 [Mh/s]
07/31/13 15:39:34 0x09c0 DBG main(): miner-working-set-threshold: 904 [MB]
07/31/13 15:39:34 0x09c0 DBG main(): miner-handle-count-threshold: 15000 [open handles]
07/31/13 15:39:34 0x09c0 DBG main(): miner-api-poll-interval: 30 [seconds]
07/31/13 15:39:34 0x09c0 DBG main(): miner-hw-errors-threshold: 1000 [h/w errors]
07/31/13 15:39:34 0x09c0 DBG main(): miner-listen-ip: 127.0.0.1
07/31/13 15:39:34 0x09c0 DBG main(): miner-listen-port: 4033
07/31/13 15:39:34 0x09c0 DBG main(): miner-solo-mining: 0
07/31/13 15:39:34 0x09c0 DBG main(): miner-notify-when-block-found: 0
07/31/13 15:39:34 0x09c0 DBG main(): --------------------
07/31/13 15:39:34 0x09c0 DBG main(): Smart Metering entries:
07/31/13 15:39:34 0x09c0 DBG main(): -----------------------
07/31/13 15:39:34 0x09c0 DBG main(): smart-metering-disable: 1
07/31/13 15:39:34 0x09c0 DBG main(): smart-metering-polling-interval: 0
07/31/13 15:39:34 0x09c0 DBG main(): smart-metering-on-peak-start-time: 00:00
07/31/13 15:39:34 0x09c0 DBG main(): smart-metering-off-peak-start-time: 00:00
07/31/13 15:39:34 0x09c0 DBG main(): smart-metering-on-peak-shutdown: 0
07/31/13 15:39:34 0x09c0 DBG main(): smart-metering-on-peak-disable-gpus: 0
07/31/13 15:39:34 0x09c0 DBG main(): ---------------------------------

[crazyates]

Can Akbash be configured to send an email upon a successful block solve? I know a lot of your coding is for GPUs, but I'd love to use this to monitor ASICs while solo mining.

[bruter]

I can't tune akbash, cgminer and BFLSingle SC 60 Gh/s device to work together.

akbash permanently restarts cgminer after "0x0fe4 SVR main(): unable to retrieve number of devices (GPU/PGA), waiting 60 seconds for miner to initialize..." message.

[bruter]

I can't tune akbash, cgminer and BFLSingle SC 60 Gh/s device to work together.

akbash permanently restarts cgminer after "0x0fe4 SVR main(): unable to retrieve number of devices (GPU/PGA), waiting 60 seconds for miner to initialize..." message.

How many devices you have?  Maybe it queries cgminer before it is done initializing.

Try to set

"miner-init-interval" : "60",

Also, could you post your akbash log file?

Please set

"wdog-log-level" : "3"

this will log DBG level diags.

I have only one BFLSingle SC 60 Gh/s device.

My akbash log file:

Code:

09/16/13 16:16:20 0x057c SVR main(): ----------- Starting -------------

09/16/13 16:16:20 0x057c SVR main(): akbash watchdog ver. 1.0.11 (D:\__GPU_ProgramFiles\__Links\_Miner-1\akbash-asic_conf_files\akbash_cgminer-asic_miner-1__SHA256.conf) - copyright (c) 2012 by Peter Moss

09/16/13 16:16:20 0x057c SVR main(): akbash started at: 09/16/2013 16:16:20

09/16/13 16:16:20 0x057c SVR main(): akbash exe name: akbash-asic.exe

09/16/13 16:16:20 0x057c DBG main(): ---------------------------------

09/16/13 16:16:20 0x057c DBG main(): watchdog specific config entries:

09/16/13 16:16:20 0x057c DBG main(): ---------------------------------

09/16/13 16:16:20 0x057c DBG main(): wdog-logFile: D:\__GPU_ProgramFiles\__Links\_Miner-1\akbash-asic_conf_files\Log\log.txt

09/16/13 16:16:20 0x057c DBG main(): wdog-log-file-size: 2097152 [bytes]

09/16/13 16:16:20 0x057c DBG main(): wdog-log-level: 3

09/16/13 16:16:20 0x057c DBG main(): miner-number-of-restarts: 100

09/16/13 16:16:20 0x057c DBG main(): miner-alive-timeout: 120 [seconds]

09/16/13 16:16:20 0x057c DBG main(): miner-not-connected-timeout: 120 [seconds]

09/16/13 16:16:20 0x057c DBG main(): wdog-listen-ip: 127.0.0.1

09/16/13 16:16:20 0x057c DBG main(): wdog-rig-name: BTC ASIC Miner #1

09/16/13 16:16:20 0x057c DBG main(): wdog-listen-port: 80

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-remote-api: 0

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-remote-help: 1

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-remote-restart: 1

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-remote-reboot: 1

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-remote-getlog: 1

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-remote-status: 0

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-notification-emails: 1

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-status-notifications: 0

09/16/13 16:16:20 0x057c DBG main(): wdog-notifications-email-address: 

09/16/13 16:16:20 0x057c DBG main(): wdog-status-notification-frequency: 0 [minutes]

09/16/13 16:16:20 0x057c DBG main(): wdog-cutoff-temperature: 86 [deg. C]

09/16/13 16:16:20 0x057c DBG main(): wdog-cutoff-temperature-cooldown-period: 5 [minutes]

09/16/13 16:16:20 0x057c DBG main(): wdog-disable-hw-monitoring: 1

09/16/13 16:16:20 0x057c DBG main(): wdog-hw-monitoring-interval: 60 [seconds]

09/16/13 16:16:20 0x057c DBG main(): wdog-gpu-utilization-threshold: 10 [%]

09/16/13 16:16:20 0x057c DBG main(): wdog-gpu-utilization-timeout: 100 [seconds]

09/16/13 16:16:20 0x057c DBG main(): ------------------------------

09/16/13 16:16:20 0x057c DBG main(): miner specific config entries:

09/16/13 16:16:20 0x057c DBG main(): ------------------------------

09/16/13 16:16:20 0x057c DBG main(): miner-exe-full-path: D:\__GPU_ProgramFiles\__Links\_Miner-1\cgminer-asic\cgminer-asic_miner-1__SHA256.lnk

09/16/13 16:16:20 0x057c DBG main(): miner-exe-name: cgminer-nogpu.exe

09/16/13 16:16:20 0x057c DBG main(): miner-init-interval: 60 [seconds]

09/16/13 16:16:20 0x057c DBG main(): miner-gpu-avg-rate-threshold: 0.00 [Mh/s]

09/16/13 16:16:20 0x057c DBG main(): miner-pga-avg-rate-threshold: 2900.00 [Mh/s]

09/16/13 16:16:20 0x057c DBG main(): miner-working-set-threshold: 904 [MB]

09/16/13 16:16:20 0x057c DBG main(): miner-handle-count-threshold: 15000 [open handles]

09/16/13 16:16:20 0x057c DBG main(): miner-api-poll-interval: 60 [seconds]

09/16/13 16:16:20 0x057c DBG main(): miner-hw-errors-threshold: 10000000 [h/w errors]

09/16/13 16:16:20 0x057c DBG main(): miner-listen-ip: 127.0.0.1

09/16/13 16:16:20 0x057c DBG main(): miner-listen-port: 4028

09/16/13 16:16:20 0x057c DBG main(): miner-solo-mining: 0

09/16/13 16:16:20 0x057c DBG main(): miner-notify-when-block-found: 1

09/16/13 16:16:20 0x057c DBG main(): miner-target-difficulty-url: https://blockchain.info/q/getdifficulty

09/16/13 16:16:20 0x057c DBG main(): --------------------

09/16/13 16:16:20 0x057c DBG main(): pool config entries:

09/16/13 16:16:20 0x057c DBG main(): --------------------

09/16/13 16:16:20 0x057c DBG main(): pool-disable-info: 1

09/16/13 16:16:20 0x057c DBG main(): pool-refresh-interval: 0 [minutes]

09/16/13 16:16:20 0x057c DBG main(): pool-api-url: 

09/16/13 16:16:20 0x057c DBG main(): pool-balance-label: 

09/16/13 16:16:20 0x057c DBG main(): pool-hash-rate-label: 

09/16/13 16:16:20 0x057c DBG main(): pool-valids-label: 

09/16/13 16:16:20 0x057c DBG main(): pool-stales-label: 

09/16/13 16:16:20 0x057c DBG main(): pool-invalids-label: 

09/16/13 16:16:20 0x057c DBG main(): parsed pool host: 

09/16/13 16:16:20 0x057c DBG main(): parsed pool port: 0

09/16/13 16:16:20 0x057c DBG main(): parsed pool uri: 

09/16/13 16:16:20 0x057c DBG main(): ------------------

09/16/13 16:16:20 0x057c DBG main(): BTC quote entries:

09/16/13 16:16:20 0x057c DBG main(): ------------------

09/16/13 16:16:20 0x057c DBG main(): btc-disable-quotes: 1

09/16/13 16:16:20 0x057c DBG main(): btc-refresh-interval: 0 [minutes]

09/16/13 16:16:20 0x057c DBG main(): btc-quote-url: 

09/16/13 16:16:20 0x057c DBG main(): btc-quote-last-label: 

09/16/13 16:16:20 0x057c DBG main(): btc-quote-ask-label: 

09/16/13 16:16:20 0x057c DBG main(): btc-quote-bid-label: 

09/16/13 16:16:20 0x057c DBG main(): -----------------------

09/16/13 16:16:20 0x057c DBG main(): Smart Metering entries:

09/16/13 16:16:20 0x057c DBG main(): -----------------------

09/16/13 16:16:20 0x057c DBG main(): smart-metering-disable: 1

09/16/13 16:16:20 0x057c DBG main(): smart-metering-polling-interval: 0

09/16/13 16:16:20 0x057c DBG main(): smart-metering-on-peak-start-time: 00:00

09/16/13 16:16:20 0x057c DBG main(): smart-metering-off-peak-start-time: 00:00

09/16/13 16:16:20 0x057c DBG main(): smart-metering-on-peak-shutdown: 0

09/16/13 16:16:20 0x057c DBG main(): smart-metering-on-peak-disable-gpus: 0

09/16/13 16:16:20 0x057c DBG main(): ---------------------------------

09/16/13 16:16:20 0x057c SVR initSmtp(): sending of email notifications will be disabled. disableFlag: 1

09/16/13 16:16:20 0x057c DBG main(): re-setting miner status...

09/16/13 16:16:20 0x057c INF main(): checking if miner is running...

09/16/13 16:16:20 0x057c SVR getProcessInfo(): unable to find process: cgminer-nogpu.exe, processId: 0, werFault: 0

09/16/13 16:16:20 0x057c SVR main(): miner is not running...sleeping for 5 seconds and retrying...

09/16/13 16:16:25 0x057c SVR getProcessInfo(): unable to find process: cgminer-nogpu.exe, processId: 0, werFault: 0

09/16/13 16:16:25 0x057c SVR main(): miner is not running...restarting

09/16/13 16:16:25 0x057c SVR getProcessInfo(): unable to find process: cgminer-nogpu.exe, processId: 0, werFault: 0

09/16/13 16:16:25 0x057c SVR restartMiner(): sleeping for 15 seconds before restarting a new miner...

09/16/13 16:16:40 0x057c INF restartMiner(): ---------------------------------------------

09/16/13 16:16:40 0x057c INF restartMiner(): starting new instance...

09/16/13 16:16:40 0x057c INF restartMiner(): command line: start D:\__GPU_ProgramFiles\__Links\_Miner-1\cgminer-asic\cgminer-asic_miner-1__SHA256.lnk

09/16/13 16:16:40 0x057c SVR send_smtp_restarted_msg(): sending of email notifications is disabled.

09/16/13 16:16:40 0x057c INF restartMiner(): sleeping for 60 seconds...

09/16/13 16:17:40 0x057c INF restartMiner(): checking if miner is running...

09/16/13 16:17:40 0x057c INF restartMiner(): new minerprocess ID: 1888

09/16/13 16:17:40 0x057c SVR main(): waiting 60 seconds for miner to settle down...

09/16/13 16:18:40 0x057c INF main(): checking miner status...

09/16/13 16:18:40 0x057c DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1379337520,"Code":11,"Msg":"Summary","Description":"cgminer 3.4.3"}],"SUMMARY":[{"Elapsed":113,"MHS av":63609.14,"Found Blocks":0,"Getworks":17,"Accepted":52,"Rejected":0,"Hardware Errors":37,"Utility":27.67,"Discarded":10,"Stale":0,"Get Failures":0,"Local Work":1730,"Remote Failures":0,"Network Blocks":2,"Total MH":7172595.3843,"Work Utility":868.92,"Difficulty Accepted":1664.00000000,"Difficulty Rejected":0.00000000,"Difficulty Stale":0.00000000,"Best Share":6357,"Device Hardware%":2.2156,"Device Rejected%":0.0000,"Pool Rejected%":0.0000,"Pool Stale%":0.0000}],"id":1}

09/16/13 16:18:41 0x057c DBG fetchMinerInfo(): target difficulty: 112628548.666347 (112.63M)

09/16/13 16:18:41 0x057c SVR main(): unable to retrieve number of devices (GPU/PGA), waiting 60 seconds for miner to initialize...

09/16/13 16:19:41 0x057c DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1379337581,"Code":11,"Msg":"Summary","Description":"cgminer 3.4.3"}],"SUMMARY":[{"Elapsed":174,"MHS av":62537.44,"Found Blocks":0,"Getworks":19,"Accepted":78,"Rejected":0,"Hardware Errors":59,"Utility":26.83,"Discarded":14,"Stale":0,"Get Failures":0,"Local Work":2595,"Remote Failures":0,"Network Blocks":2,"Total MH":10909216.9318,"Work Utility":859.54,"Difficulty Accepted":2496.00000000,"Difficulty Rejected":0.00000000,"Difficulty Stale":0.00000000,"Best Share":12742,"Device Hardware%":2.3065,"Device Rejected%":0.0000,"Pool Rejected%":0.0000,"Pool Stale%":0.0000}],"id":1}

09/16/13 16:19:41 0x057c DBG fetchMinerInfo(): target difficulty: 112628548.666347 (112.63M)

09/16/13 16:19:41 0x057c SVR main(): unable to retrieve number of devices (GPU/PGA), attempting to restart miner...

09/16/13 16:19:41 0x057c SVR restartMiner(): killing miner process: 1888

09/16/13 16:19:41 0x057c SVR killProcessByID(1888): process handle: 480, TeminateProcess() returned rc: 1

09/16/13 16:19:41 0x057c SVR restartMiner(): sleeping for 15 seconds before restarting a new miner...

09/16/13 16:19:56 0x057c INF restartMiner(): ---------------------------------------------

09/16/13 16:19:56 0x057c INF restartMiner(): old process ID: 1888

09/16/13 16:19:56 0x057c INF restartMiner(): process name: cgminer-nogpu.exe

09/16/13 16:19:56 0x057c INF restartMiner(): starting new instance...

09/16/13 16:19:56 0x057c INF restartMiner(): command line: start D:\__GPU_ProgramFiles\__Links\_Miner-1\cgminer-asic\cgminer-asic_miner-1__SHA256.lnk

09/16/13 16:19:56 0x057c SVR send_smtp_restarted_msg(): sending of email notifications is disabled.

09/16/13 16:19:56 0x057c INF restartMiner(): sleeping for 60 seconds...

09/16/13 16:20:56 0x057c INF restartMiner(): checking if miner is running...

09/16/13 16:20:56 0x057c INF restartMiner(): new minerprocess ID: 2956

09/16/13 16:20:56 0x057c SVR main(): waiting 60 seconds for miner to settle down...

09/16/13 16:21:56 0x057c DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1379337716,"Code":11,"Msg":"Summary","Description":"cgminer 3.4.3"}],"SUMMARY":[{"Elapsed":113,"MHS av":59977.37,"Found Blocks":0,"Getworks":16,"Accepted":43,"Rejected":1,"Hardware Errors":47,"Utility":22.80,"Discarded":9,"Stale":0,"Get Failures":0,"Local Work":1634,"Remote Failures":0,"Network Blocks":2,"Total MH":6786048.3277,"Work Utility":823.03,"Difficulty Accepted":1376.00000000,"Difficulty Rejected":32.00000000,"Difficulty Stale":0.00000000,"Best Share":722,"Device Hardware%":2.9393,"Device Rejected%":2.0619,"Pool Rejected%":2.2727,"Pool Stale%":0.0000}],"id":1}

09/16/13 16:21:57 0x057c DBG fetchMinerInfo(): target difficulty: 112628548.666347 (112.63M)

09/16/13 16:21:57 0x057c SVR main(): no GPUs used by the miner, GPU H/W monitoring will be disabled...

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): status: NOT CONNECTED, gpus: 0, pgas: 0, a: 43, gw: 16, avg: 59977.37, hw: 47, since: 09/16/2013 16:20:03, u: 22.80, ver: 3.4.3, days: 0, hrs: 0, min: 1, secs: 53, found blocks: 0

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 0, url: stratum+tcp://eu-stratum.btcguild.com:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 1, url: stratum+tcp://stratum.btcguild.com:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 2, url: stratum+tcp://mint.bitminter.com:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 3, url: stratum+tcp://stratum2.bitparking.com:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 4, url: stratum+tcp://mmpool.bitparking.com:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 5, url: stratum+tcp://pool.50btc.com:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 6, url: stratum+tcp://192.168.44.8:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 7, url: stratum+tcp://eustratum.ozco.in:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 8, url: stratum+tcp://stratum.bitcoin.cz:3333 status: ALIVE

09/16/13 16:21:57 0x057c DBG displayMinerInfoObject(): pool 9, url: stratum+tcp://pool1.us.multipool.us:3333 status: ALIVE

09/16/13 16:21:57 0x057c SVR main(): monitor thread created, handle: 644, threadId: 0x0a04

09/16/13 16:21:57 0x057c SVR main(): miner api thread created, handle: 844, threadId: 0x0fcc

09/16/13 16:21:57 0x057c SVR main(): listen thread created, handle: 824, threadId: 0x0630

09/16/13 16:21:57 0x0fcc SVR minerApiThread(): will poll miner (127.0.0.1@4028) status every 60 seconds

09/16/13 16:21:57 0x0630 INF listenForCommands(): listening on 127.0.0.1@80

09/16/13 16:21:57 0x0a04 INF monitorThread(): wdog is entering state: NOT RUNNNING -> NOT CONNECTED

09/16/13 16:22:57 0x0fcc DBG minerApiThread(): woke up; checking miner status...

09/16/13 16:22:57 0x0fcc DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1379337777,"Code":11,"Msg":"Summary","Description":"cgminer 3.4.3"}],"SUMMARY":[{"Elapsed":175,"MHS av":60143.63,"Found Blocks":0,"Getworks":20,"Accepted":73,"Rejected":3,"Hardware Errors":72,"Utility":25.03,"Discarded":15,"Stale":0,"Get Failures":0,"Local Work":2511,"Remote Failures":0,"Network Blocks":3,"Total MH":10522669.8752,"Work Utility":826.48,"Difficulty Accepted":2336.00000000,"Difficulty Rejected":96.00000000,"Difficulty Stale":0.00000000,"Best Share":2703,"Device Hardware%":2.9009,"Device Rejected%":3.9834,"Pool Rejected%":3.9474,"Pool Stale%":0.0000}],"id":1}

09/16/13 16:22:58 0x0fcc DBG fetchMinerInfo(): target difficulty: 112628548.666347 (112.63M)

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): status: NOT CONNECTED, gpus: 0, pgas: 0, a: 73, gw: 20, avg: 60143.63, hw: 72, since: 09/16/2013 16:20:02, u: 25.03, ver: 3.4.3, days: 0, hrs: 0, min: 2, secs: 55, found blocks: 0

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 0, url: stratum+tcp://eu-stratum.btcguild.com:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 1, url: stratum+tcp://stratum.btcguild.com:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 2, url: stratum+tcp://mint.bitminter.com:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 3, url: stratum+tcp://stratum2.bitparking.com:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 4, url: stratum+tcp://mmpool.bitparking.com:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 5, url: stratum+tcp://pool.50btc.com:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 6, url: stratum+tcp://192.168.44.8:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 7, url: stratum+tcp://eustratum.ozco.in:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 8, url: stratum+tcp://stratum.bitcoin.cz:3333 status: ALIVE

09/16/13 16:22:58 0x0fcc DBG displayMinerInfoObject(): pool 9, url: stratum+tcp://pool1.us.multipool.us:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG minerApiThread(): woke up; checking miner status...

09/16/13 16:23:58 0x0fcc DBG parseGPUSummary(): buf: {"STATUS":[{"STATUS":"S","When":1379337838,"Code":11,"Msg":"Summary","Description":"cgminer 3.4.3"}],"SUMMARY":[{"Elapsed":237,"MHS av":60083.68,"Found Blocks":0,"Getworks":22,"Accepted":104,"Rejected":3,"Hardware Errors":100,"Utility":26.36,"Discarded":19,"Stale":0,"Get Failures":0,"Local Work":3386,"Remote Failures":0,"Network Blocks":3,"Total MH":14220636.7171,"Work Utility":832.51,"Difficulty Accepted":3328.00000000,"Difficulty Rejected":96.00000000,"Difficulty Stale":0.00000000,"Best Share":2703,"Device Hardware%":2.9551,"Device Rejected%":2.9233,"Pool Rejected%":2.8037,"Pool Stale%":0.0000}],"id":1}

09/16/13 16:23:58 0x0fcc DBG fetchMinerInfo(): target difficulty: 112628548.666347 (112.63M)

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): status: NOT CONNECTED, gpus: 0, pgas: 0, a: 104, gw: 22, avg: 60083.68, hw: 100, since: 09/16/2013 16:20:01, u: 26.36, ver: 3.4.3, days: 0, hrs: 0, min: 3, secs: 57, found blocks: 0

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 0, url: stratum+tcp://eu-stratum.btcguild.com:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 1, url: stratum+tcp://stratum.btcguild.com:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 2, url: stratum+tcp://mint.bitminter.com:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 3, url: stratum+tcp://stratum2.bitparking.com:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 4, url: stratum+tcp://mmpool.bitparking.com:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 5, url: stratum+tcp://pool.50btc.com:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 6, url: stratum+tcp://192.168.44.8:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 7, url: stratum+tcp://eustratum.ozco.in:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 8, url: stratum+tcp://stratum.bitcoin.cz:3333 status: ALIVE

09/16/13 16:23:58 0x0fcc DBG displayMinerInfoObject(): pool 9, url: stratum+tcp://pool1.us.multipool.us:3333 status: ALIVE

09/16/13 16:24:27 0x0a04 SVR monitorThread(): wdog has been in NOT CONNECTED state for longer than 2 minutes, restarting miner...timePeriod: 150.000000

09/16/13 16:24:27 0x0a04 SVR restartMiner(): killing miner process: 2956

09/16/13 16:24:27 0x0a04 SVR killProcessByID(2956): process handle: 808, TeminateProcess() returned rc: 1

09/16/13 16:24:27 0x0a04 SVR restartMiner(): sleeping for 15 seconds before restarting a new miner...

09/16/13 16:24:42 0x0a04 INF restartMiner(): ---------------------------------------------

09/16/13 16:24:42 0x0a04 INF restartMiner(): old process ID: 2956

09/16/13 16:24:42 0x0a04 INF restartMiner(): process name: cgminer-nogpu.exe

09/16/13 16:24:42 0x0a04 INF restartMiner(): starting new instance...

09/16/13 16:24:42 0x0a04 INF restartMiner(): command line: start D:\__GPU_ProgramFiles\__Links\_Miner-1\cgminer-asic\cgminer-asic_miner-1__SHA256.lnk

09/16/13 16:24:42 0x0a04 SVR send_smtp_restarted_msg(): sending of email notifications is disabled.

09/16/13 16:24:42 0x0a04 INF restartMiner(): sleeping for 60 seconds...

09/16/13 16:24:53 0x0b3c SVR received 2 signal, exiting...

09/16/13 16:24:53 0x0b3c SVR signalShutdown(): set shutdown event semaphore...

09/16/13 16:24:53 0x0b3c SVR signalShutdown(): waiting for miner api thread to finish...

09/16/13 16:24:53 0x0fcc SVR minerApiThread(): exiting thread: 0x0fcc

09/16/13 16:24:53 0x0b3c SVR signalShutdown(): monitor api thread is no longer running.

09/16/13 16:24:53 0x0b3c SVR signalShutdown(): waiting for miner monitor thread to finish...

09/16/13 16:24:57 0x0630 SVR listenForCommands(): exiting thread: 0x0630

09/16/13 16:24:57 0x0a04 INF restartMiner(): checking if miner is running...

09/16/13 16:24:57 0x0a04 INF restartMiner(): new minerprocess ID: 3760

09/16/13 16:24:57 0x0a04 SVR monitorThread(): exiting thread: 0x0a04

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): monitor thread is no longer running.

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): waiting for API listen thread to finish...

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): api listen thread is no longer running.

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): closing hCgmShutdown handle...

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): closing btcMtx handle...

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): closing ltcMtx handle...

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): closing poolMtx handle...

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): closing gpuMtx handle...

09/16/13 16:24:57 0x0b3c SVR signalShutdown(): closing adlMtx handle...

09/16/13 16:24:57 0x0b3c SVR main(): cleaning up Winsockets...

09/16/13 16:24:57 0x0b3c SVR main(): ----------- Exiting -------------

[xsfgsdrwe]

I'm interested in using akbash to monitor cgminer while mining litecoins; it looks like a great program. However, I get the following every time I use it:

04/11/13 18:03:12 0x1558 INF main(): checking miner status...
04/11/13 18:03:12 0x1558 ERR net_recvBytes(): WSARecv failed with error: 10053
04/11/13 18:03:12 0x1558 ERR sendCommand(): net_recvBytes() failed: -11
04/11/13 18:03:12 0x1558 ERR net_recvBytes(): WSARecv failed with error: 10053
04/11/13 18:03:12 0x1558 ERR sendCommand(): net_recvBytes() failed: -11
04/11/13 18:03:12 0x1558 ERR net_recvBytes(): WSARecv failed with error: 10053
04/11/13 18:03:12 0x1558 ERR sendCommand(): net_recvBytes() failed: -11
04/11/13 18:03:12 0x1558 SVR main(): unable to retrieve number of devices (GPU/PGA), waiting 30 seconds for

Akbash starts properly, detects that cgminer isn't running, properly starts cgminer up, but then this happens - looks like it's unable to properly communicate with cgminer. Akbash then kills cgminer, starts up a new instance, and the whole thing repeats.

I have the following in my cgminer startup script:

--api-listen --api-allow -W:127.0.0.1 --api-network

Anyone have any ideas what might be causing the problem? Is it because I'm using the --scrypt option to mine litecoins? I know this was intended as a monitor for bitcoin mining, but the cgminer output is pretty much the same...

Thanks!

[btcradnor]

I can't seem to get akbash to connect to gmail's smtp server to send me email. I've tried a different domain, but as it's simply an alias to gmail.com it also fails. I tried setting my address to @smtp.gmail.com and that doesn't work either.

Here's the log file:

Code:

12/16/13 11:31:07 0x0c08 DBG net_reQueryMxRecord(): querying mx records for email domain: 'gmail.com'
12/16/13 11:31:07 0x0c08 DBG net_reQueryMxRecord(): email domain: 'gmail.com', mail server: 'alt3.gmail-smtp-in.l.google.com'
12/16/13 11:31:07 0x0c08 DBG net_reQueryMxRecord(): looking up an IP for 'alt3.gmail-smtp-in.l.google.com'
12/16/13 11:31:07 0x0c08 DBG net_reQueryMxRecord(): mail exchanger: 'alt3.gmail-smtp-in.l.google.com', ip: 173.194.68.27
12/16/13 11:31:37 0x0ee4 INF restartMiner(): checking if miner is running...
12/16/13 11:31:37 0x0ee4 INF restartMiner(): new minerprocess ID: 1368
12/16/13 11:31:37 0x0ee4 SVR main(): waiting 30 seconds for miner to settle down...
12/16/13 11:32:07 0x0c08 SVR net_connectMX(): host '173.194.68.27' did not respond in 60 seconds
12/16/13 11:32:07 0x0c08 SVR sendEmailThread(): failed to connect to mail server for email domain: gmail.com
12/16/13 11:32:07 0x0c08 SVR sendEmailThread(): exiting thread: 0x0c08
12/16/13 11:32:07 0x0c08 INF sendEmailThread(): closing connection.
12/16/13 11:32:07 0x0c08 INF sendEmailThread(): exiting email thread: 0x0c08

[Telek]

This looks very nice, thank you!  I've got one card that cgminer just seems to keep declaring dead, and occasionally cgminer crashes which stops everything.  I'm hoping that this will help with that!

Is there a way to change the scale for us lowly non-massive-farm scrypt farmers?

Right now the status page shows GH/s and MH/s but we're just doing MH/s and KH/s.

Thanks!

[kfi290]

Great work! Is there any way to configure a password for web access?

[Telek]

This looks very nice, thank you!  I've got one card that cgminer just seems to keep declaring dead, and occasionally cgminer crashes which stops everything.  I'm hoping that this will help with that!

Is there a way to change the scale for us lowly non-massive-farm scrypt farmers?

Right now the status page shows GH/s and MH/s but we're just doing MH/s and KH/s.

Thanks!

Just use 0.3 in the threshold.  Here is a sample of my config file for litecoin rig:

Thanks!  But... I already have that, and it still reports the total in GH, and the individual cards in MH. 

I took a look at the source code, and it appears that it's hardcoded to always display that way.

Can I fork&pull to add a switch to allow toggling this between GH/MH and MH/KH?  If so, any particular option name I should use?

[icecube45]

Please give me an option to change the smtp port!
This is because outgoing port 25 requests are blocked on my isp (and many others),
but allowing for me to send smtp requests on port 587, or other ports, will work fine for me.