litecoind + pushpool + mmcfe?

[GTRsdk]

Hi,

I'm trying to get my own private pool running. Before you say "P2pool is your private pool" or "P2Pool is what you should just use instead", I'm doing this for the knowledge of setting up a pool this way and for fun.

Okay so I have mmcfe configured to connect to the localhost on port 9332 (which is what I have litecoind set for too).

I have pushpool set so it should be thinking that it connects to bitcoin at port 9332 when it is really litecoind.

But when I have a miner try to connect to the pool server, it returns error 401.

And for some reason, pushpoold seems to quit shortly after being started.

Anyone know what I misconfigured or didn't configure?


GTRsdk

[pooler]

First I would make sure that your worker's username and password are correctly set in the pool_worker table in the database.

As regards pushpool quitting, have a look at the syslog, you might get some clue about what's going on.

[GTRsdk]

Username and password all appear to be correct.

In syslog, after running ./pushpoold, I get pushpoold[31752]: server.json: JSON parse failed

[pooler]

In syslog, after running ./pushpoold, I get pushpoold[31752]: server.json: JSON parse failed

Then there's probably a syntax error in your server.json file. It could be a misplaced comma or something like that.

[GTRsdk]

Okay so here is my server.json file (with usernames & passwords removed and part of an IP removed)

Code:

## server.json
 
{
   # network ports
   "listen" : [
      # binary protocol (default), port 8342
      { "port" : 8123 },
 
      # HTTP JSON-RPC protocol, port 8341
      { "port" : 8080, "protocol" : "http-json" },
 
      # HTTP JSON-RPC protocol, port 8344,
      #proxy is most likely your external ip address if your running a public pool
      # requests to us | "proxy" should be set to your ip address that people will connect through
      { "port" : 8344, "protocol" : "http-json",
        "proxy" : "192.-.-.-" },
 
      # binary protocol, localhost-only port 8338
      # host is most likely your localhost address
      { "host" : "127.0.0.1", "port" : 8338, "protocol" : "binary" }
   ],
 
   # database settings
   "database" : {
      "engine" : "mysql",
 
      "host" : "localhost",
 
      "port" : 3306,
 
      #database name
      "name" : "mmcfe",
      #database user
      "username" : "-",
      #database password
      "password" : "-",
      #enable sharelog | to insert share data or sometimes known as "work"
      "sharelog" : true,
      "stmt.pwdb":"SELECT password FROM pool_worker WHERE username = ?",
 
      "stmt.sharelog":"INSERT INTO shares (rem_host, username, our_result, upstream_result,     reason, so$
 
   },
 
   #uncoment this when you want to use memcached (Recommended for servers over 1.5gb of ram)
   # cache settings
   #"memcached" : {
   #   "servers" : [
   #      { "host" : "127.0.0.1", "port" : 11211 }
   #   ]
   #},
 
   "pid" : "/home/pushpool/pushpoold.pid",
 
   # overrides local hostname detection
   "forcehost" : "localhost.localdomain",
"log.requests" : "/home/pushpool/request.log",
   "log.shares" : "/home/pushpool/shares.log",
 
   # the server assumes longpolling (w/ SIGUSR1 called for each blk)
   "longpoll.disable" : false,
 
   # length of time to cache username/password credentials, in seconds
   "auth.cred_cache.expire" : 75,
 
   # RPC settings
   #Bitcoind Protocal settings
   #Host were bitcoind can be found on the network
   "rpc.url" : "http://127.0.0.1:9332/",
   #Username & password to connect to bitcoind
   "rpc.user" : "-",
   "rpc.pass" : "-",
 
   # rewrite returned 'target' to difficulty-1?
   "rpc.target.rewrite" : true
}

[jgarzik]

Code:

 
      "stmt.sharelog":"INSERT INTO shares (rem_host, username, our_result, upstream_result,     reason, so$

That bit is certainly corrupted.

[GTRsdk]

I removed that line and preceeding comma then made the directories and files for pushpool and it now works!

Thanks for the help

[Tittiez]

Hate to bump an old thread, but I'm setting up a pool and I have everything working. My shares are being counted an all, but the only problem is my hashrate isn't being reported on the site at all. Any help?

[Tittiez]

Anyone? I also tried simplecoin, but I have the same problem, hashrate isn't being displayed. I am getting shares recorded though.

[pooler]

Hate to bump an old thread, but I'm setting up a pool and I have everything working. My shares are being counted an all, but the only problem is my hashrate isn't being reported on the site at all. Any help?

Do you mean it is reported as zero? Bitcoin frontends usually display hash rates in MH/s, so that may be the cause.

[Tittiez]

Hate to bump an old thread, but I'm setting up a pool and I have everything working. My shares are being counted an all, but the only problem is my hashrate isn't being reported on the site at all. Any help?

Do you mean it is reported as zero? Bitcoin frontends usually display hash rates in MH/s, so that may be the cause.

No no I fixed it with nushor's help, I had share history with pushpool screwed up.