Bitcoin Forum
March 29, 2024, 03:13:34 PM *
News: Latest Bitcoin Core release: 26.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: Ark Customized Version Of The A1 Chip Bitcoin Miner 1.5T ( low power consumption  (Read 3648 times)
fzminer (OP)
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
September 03, 2014, 11:37:29 AM
 #1

Ark Customized Version Of The A1 Chip Bitcoin Miner 1.5T ( low power consumption ) Evaluation
Ark mining station (www.fz49.com) Original, reprint please indicate the source


Under the current caculate power soaring, mining more and more difficult. Under the Bitcoin market deteriorating situation , Bitcoin mining machine not to the past, to fight at all costs to calculate the force , now have to fight price-performance , mainly shows on single G power consumption. End of life in the mining machine to dig out the difference between currency and electricity. When the difference is 0 , mining machines have shut down, so power consumption indirectly reflect the life of the mining machine . 1T machine such as a daily output of 0.018 coins, electricity 24 degree a day, a half- count force 1.5T, producing coins .027 , electricity 36 degrees one day , when the currency * 0.027 < 36 * electricity prices, the mining machine on there is no need to continue to go on a dig ;If the force is also considered a low -power 1.5T mining machine , the same yield 0.027 coins every day, but power is reduced to 1100W, electricity 26.4 degrees one day , saving 10 degrees , apparently low-power mining machine life to be longer , for under the mining machine for the buck in a down- state work , physical life is certainly longer , at the same time stability will be strengthened. The evaluation of the mining machine for Ark customized version of A1 Minerals 1.5T ( low power consumption ) , due to the limited testing time , the measured data will inevitably be one-sided , welcome ore Friends correction.

1, The mining machine appearance and workmanship
Mining machine size slightly higher than the four- module A1 Minerals , dimensions: length 36cm*wide 17.5cm* high 46cm; total weight : 15.5KG. Overall mining machine shown in Figure 1 .
http://www.fz49.com/data/attachment/portal/201409/03/003206ns125sn1q3fn5fgg.jpg.thumb.jpg
Figure 1 Overall mining machine

Figure 2 is a two Ants S3 1.5T with an Ark customized version of the mining machine comparison chart .
http://www.fz49.com/data/attachment/portal/201409/03/003355aigs0862nk36663z.jpg.thumb.jpg
Figure 2 mining machine size comparison

Mining machine from Shenzhen,China reknowned provider of industrial solutions , strength and understated by large OEM production, excellent workmanship . PCB board red , mining machine is running for the indicator is red light.
Internal structure shown in Figure 3 .
http://www.fz49.com/data/attachment/portal/201409/03/003634kdrtffr1zclfc9l1.jpg.thumb.jpg
Internal structure of Figure 3

http://www.fz49.com/data/attachment/portal/201409/03/004221pwypvdy4ivgvp5gp.jpg.thumb.jpg
Figure 4 control panel

http://www.fz49.com/data/attachment/portal/201409/03/004324w1231gvg4xfllz1i.jpg.thumb.jpg
Figure 5 raspberry camp

Using a dedicated mining machine Gold 1150W power supply , as shown in Figure 6 .
http://www.fz49.com/data/attachment/portal/201409/03/004606vgccik1gzhihuqc7.jpg
Figure 6 mining machine power

http://www.fz49.com/data/attachment/portal/201409/03/004837ujzjovdzysvarvac.jpg
Figure 7 operation module

2, The software control system
Ark customized version of the T -stage mining machine, using raspberry send + Linux raspberrypi 3.6.11 operating system , you can use putty ssh to log into the software with raspberry linux system, or WinSCP FTP log on to the system to view or modify raspberry files.
http://www.fz49.com/data/attachment/portal/201409/03/152353ihgpfvgvhmwfxpog.jpg
Figure 8 background control interface

Ark customized version of the T -stage mining machine mining machine with the previous A1 backstage different places , there is the chip supply voltage regulation and mineral card ( module ) frequency adjustment , the miners can be fine-tuned for each module according to the chip 's physical .

3, The data mining machine running
1), the average count force
Randomly collected a force curve twenty-four hours mining machine operator , mining pools tested for pond and P2P pool , shown in Figure 9 . Blue curve is the 1.5T mining machine operator tries to twenty-four small , it can be seen from the figure, considered as the central axis force to 1.58T , mining machine mining machine for 1.5T enough .
http://www.fz49.com/data/attachment/portal/201409/03/005359pky77m8xsrxo8rgd.jpg
Figure 9 fishpond operators force curve

Test mining machine operator at 1.5T count force axis force P2P mine pool , trying to count shown in Figure 10 .
http://www.fz49.com/data/attachment/portal/201409/03/005702h8sokzp9izsnp9ny.jpg
Figure 10 p2p tank mine operator force plot

2) , the wall power
Mining machine using a 1150W power supply under a gold medal , a sufficient amount of force 1.5T operator working conditions , the whole measured power 1118W. Wall power shown in Figure 11 .
http://www.fz49.com/data/attachment/portal/201409/03/010047wfernkrmrn99rfr7.jpg.thumb.jpg
Figure 11 wall power

3 ), the noise decibel
Mining Machine has three speed fan , the sound is much less than the 2T confidential , but a lot bigger than garden ant ore mining machine and machine noise, noise decibel is 58 db . As shown in Figure 12 .
http://www.fz49.com/data/attachment/portal/201409/03/010441n2jutpi1ppu1yxdz.jpg
http://www.fz49.com/data/attachment/portal/201409/03/003206ns125sn1q3fn5fgg.jpg
Figure 12 decibels of noise

4) , mining machine temperature
When the ambient temperature of 30 degrees , measured with a thermometer outlet temperature of 41 degrees. As shown in Figure 13 .
http://www.fz49.com/data/attachment/portal/201409/03/010748g0eqsru5ucsqrrt5.jpg.thumb.jpg
Figure 13 outlet temperature

At ambient temperature reaches 38 degrees mine , the measured outlet temperature was 41 degrees. Chip highest temperature near 65 degrees , usually around 59 degrees. Figure 13 is a stable operation of the mine has been two days of 1.5T mining machine backstage monitor temperature.

The Ark Customed 1.5T miner In Stock
Reservation contact 1: Serena Cheng
Skype: chengying0115@hotmail.com
Email:chengying0115@hotmail.com
QQ: 1029998052
Mobile phone:+8615070139612
Reservation contact 2: Luo
QQ: 69199742
Email:69199742@qq.com
Mobile phone:+8618588264803

1711725214
Hero Member
*
Offline Offline

Posts: 1711725214

View Profile Personal Message (Offline)

Ignore
1711725214
Reply with quote  #2

1711725214
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1711725214
Hero Member
*
Offline Offline

Posts: 1711725214

View Profile Personal Message (Offline)

Ignore
1711725214
Reply with quote  #2

1711725214
Report to moderator
opieum2
Hero Member
*****
Offline Offline

Activity: 532
Merit: 500


View Profile
September 03, 2014, 04:29:17 PM
 #2

These look remarkably similar to the AMT ones reviewed here https://bitcointalk.org/index.php?topic=752116.0, the only difference is in the PCB color. The fans seem just as loud. Can you post a video of the actual power consumption while hashing? Also the fact that that AMT also admitted they would sell via various fronts, its hard to believe these are different from the ones being sold now. Please post more info. Considering the consumption of the A1 the power consumption by itself is very hard to believe. Maybe there is someone respected and trusted in the community who can lend more technical insight on this.

"amtminers scam joshua zipkin scammer"
-Joshua Zipkin leaked skype chats http://bit.ly/1s7U2Yb
-For bitcoin to succeed the community must police itself.
bolehvpn
Full Member
***
Offline Offline

Activity: 136
Merit: 100


View Profile WWW
September 05, 2014, 04:10:46 AM
 #3

opieum2:

With these 1.5T they're packing in more chips and not overclocking it.

Previously with the 1 th they're only packing 32 chips and overclocking it hence reducing power efficiency.

To remain competitive while continuing to use A1 chips, they pack 60 A1s and then don't overclock it or only overclock it slightly hence achieving the higher efficiency.

All the major A1 vendors in China are doing this.

BolehVPN [Offshore, no log VPN|Accepts BTC, DASH and XEM]
yslyung
Legendary
*
Offline Offline

Activity: 1500
Merit: 1002


Mine Mine Mine


View Profile
September 05, 2014, 05:52:38 AM
 #4

opieum2:

With these 1.5T they're packing in more chips and not overclocking it.

Previously with the 1 th they're only packing 32 chips and overclocking it hence reducing power efficiency.

To remain competitive while continuing to use A1 chips, they pack 60 A1s and then don't overclock it or only overclock it slightly hence achieving the higher efficiency.

All the major A1 vendors in China are doing this.

bro tak cukup power lah . . . add psu = more weight + increased shipping costs
fzminer (OP)
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
September 06, 2014, 01:18:01 AM
 #5

These look remarkably similar to the AMT ones reviewed here https://bitcointalk.org/index.php?topic=752116.0, the only difference is in the PCB color. The fans seem just as loud. Can you post a video of the actual power consumption while hashing? Also the fact that that AMT also admitted they would sell via various fronts, its hard to believe these are different from the ones being sold now. Please post more info. Considering the consumption of the A1 the power consumption by itself is very hard to believe. Maybe there is someone respected and trusted in the community who can lend more technical insight on this.

This is The Ark customed version, the light is red . the Power consumption is 1127w.
fzminer (OP)
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
September 06, 2014, 01:21:49 AM
 #6

opieum2:

With these 1.5T they're packing in more chips and not overclocking it.

Previously with the 1 th they're only packing 32 chips and overclocking it hence reducing power efficiency.

To remain competitive while continuing to use A1 chips, they pack 60 A1s and then don't overclock it or only overclock it slightly hence achieving the higher efficiency.

All the major A1 vendors in China are doing this.

This is 6 module. 5 module can overclocking.
And our this miner can enough reach 1500G/HS. You can try to use 1.5T, it is not worse than 1T.
fzminer (OP)
Newbie
*
Offline Offline

Activity: 19
Merit: 0


View Profile
September 08, 2014, 01:32:29 AM
 #7

The Ark Customed 1.5T miner in large stock!
Jimlaw
Newbie
*
Offline Offline

Activity: 2
Merit: 0


View Profile
October 10, 2014, 12:48:10 PM
 #8

There is no guarantee.

My 1150w power is boken.

Answer from 被遗忘者 69199742@qq.com is:

"You can go to buy a local 1150 w power for replacement ,Even more so that you save money"

 Shocked
technobitVesi
Newbie
*
Offline Offline

Activity: 65
Merit: 0


View Profile
October 10, 2014, 01:06:26 PM
 #9

There is no way PSU @ 90+ percent load to be so efective.
Also what settings your run A1 chips ( clock /voltage) in order to get 0.76 W/Ghs ?
tschrock
Newbie
*
Offline Offline

Activity: 3
Merit: 0


View Profile
March 17, 2015, 05:10:22 PM
 #10

I bought one of these from a Chinese reseller on Alibaba.  The power supply died and I can't find a replacement anywhere.  The P/S has no 24 pin connector.  Just a 8-pin to the PCB and then 6 6-pin connectors to the mining boards.  Now that selling miners is hard my reseller stopped offering them and won't respond to me.  I need to buy a replacement power supply jst like the one in the picture.  Can anyone point me in the right direction?
dogie
Legendary
*
Offline Offline

Activity: 1666
Merit: 1183


dogiecoin.com


View Profile WWW
March 17, 2015, 05:47:06 PM
 #11

I bought one of these from a Chinese reseller on Alibaba.  The power supply died and I can't find a replacement anywhere.  The P/S has no 24 pin connector.  Just a 8-pin to the PCB and then 6 6-pin connectors to the mining boards.  Now that selling miners is hard my reseller stopped offering them and won't respond to me.  I need to buy a replacement power supply jst like the one in the picture.  Can anyone point me in the right direction?

If you can take a picture of the connector we can try and work out the pinout, and so a suitable replacement.

philipma1957
Legendary
*
Online Online

Activity: 4074
Merit: 7593


'The right to privacy matters'


View Profile WWW
March 17, 2015, 05:53:07 PM
 #12

I bought one of these from a Chinese reseller on Alibaba.  The power supply died and I can't find a replacement anywhere.  The P/S has no 24 pin connector.  Just a 8-pin to the PCB and then 6 6-pin connectors to the mining boards.  Now that selling miners is hard my reseller stopped offering them and won't respond to me.  I need to buy a replacement power supply jst like the one in the picture.  Can anyone point me in the right direction?

you do not need that psu.  looks like an evga 1300 g2 can replace it.

 the evga 1300 supplies up to 1250 watts no worries.

It  has six pcie connectors.

what part of the world are you in?

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
March 17, 2015, 07:43:19 PM
 #13

I bought one of these from a Chinese reseller on Alibaba.  The power supply died and I can't find a replacement anywhere.  The P/S has no 24 pin connector.  Just a 8-pin to the PCB and then 6 6-pin connectors to the mining boards.  Now that selling miners is hard my reseller stopped offering them and won't respond to me.  I need to buy a replacement power supply jst like the one in the picture.  Can anyone point me in the right direction?

I don't like doing it but you can use two power supplies.  I did this one a 1T dragon when it's original PSU quit.  One hooked up to a few blades and controller board.  And one just blades.  Worked for month's.  

I don't think you will find a way around not having power it if it's the board I'm thinking of.
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
March 17, 2015, 07:45:19 PM
 #14

I bought one of these from a Chinese reseller on Alibaba.  The power supply died and I can't find a replacement anywhere.  The P/S has no 24 pin connector.  Just a 8-pin to the PCB and then 6 6-pin connectors to the mining boards.  Now that selling miners is hard my reseller stopped offering them and won't respond to me.  I need to buy a replacement power supply jst like the one in the picture.  Can anyone point me in the right direction?

you do not need that psu.  looks like an evga 1300 g2 can replace it.

 the evga 1300 supplies up to 1250 watts no worries.

It  has six pcie connectors.

what part of the world are you in?

This PSU would replace it and be a upgrade.  Assuming stock freq it should pull around 1100 watts.   So a 1250 or 1300 would do it no issues.
Meech
Hero Member
*****
Offline Offline

Activity: 924
Merit: 1000



View Profile
March 18, 2015, 02:49:29 AM
 #15

No offense but was this Google translated?  On first read I thought you might be from Texas, ore mining really?
Can't blame them on trying to use up all their old chips.  Was a price stated in there somewhere?
notlist3d
Legendary
*
Offline Offline

Activity: 1456
Merit: 1000



View Profile
March 18, 2015, 10:47:06 PM
 #16

No offense but was this Google translated?  On first read I thought you might be from Texas, ore mining really?
Can't blame them on trying to use up all their old chips.  Was a price stated in there somewhere?

I think it could possibly be that some words are from another miner.  This looks and has same performance of the LKETC 1.5 T machine they made.

I wonder if it's really a "Ark Customized" or a LKETC made machine.
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!