WBF1 (OP)
|
|
September 04, 2014, 03:14:11 PM |
|
I believe with these you can run 5 tubes off 4 PSU. I use EVGA 1300 Watt Supernova PSUs for them. http://www.newegg.com/Product/Product.aspx?Item=N82E16817438011Suggested/recommended psu? 10 psu is needed for a moq set. It's going to be a wire jungle ! Can the dps2000w support 2 miners 24x7 ? Looks like a little to close to psu max output. For stock settings i think 1 only 1 pcie needs to be connected and 2 if oc? Not too sure myself so owners please confirm.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
September 04, 2014, 03:53:39 PM |
|
Suggested/recommended psu? 10 psu is needed for a moq set. It's going to be a wire jungle ! Can the dps2000w support 2 miners 24x7 ? Looks like a little to close to psu max output. For stock settings i think 1 only 1 pcie needs to be connected and 2 if oc? Not too sure myself so owners please confirm.
I've got three different installs of 5 Tubes on 2x DPS2K that have been running for a week solid. One had issues I thought might be heat-related, but it was a faulty PSU. Replacement has been going steady since Sunday.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
September 04, 2014, 04:09:09 PM |
|
Comprehensive guide is comprehensive. Need more red bull.
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
September 04, 2014, 04:54:38 PM |
|
Nice! Did you get your Red Bull? Comprehensive guide is comprehensive. Need more red bull.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
September 04, 2014, 06:04:31 PM |
|
|
|
|
|
hedgy73
Legendary
Offline
Activity: 1414
Merit: 1077
|
|
November 16, 2014, 03:08:47 PM |
|
How did you get on with the fans? I've got one tube running and another on the way and the noise is giving me a headache with the standard fan. I need to find a quieter one especially before the other one arrives to relieve my headache and stop me getting divorced .
|
|
|
|
hagie
|
|
November 18, 2014, 07:41:27 PM |
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
|
|
|
|
crusoe1234
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 19, 2014, 03:43:05 AM |
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
I'm using bfgminer 4.7.2 with no problems using proxy. My start up is "bfgminer.exe -o stratum+tcp://uk1.ghash.io:3333 -u x -p x --stratum-port 3333 --set-device PXY:diff=512" I also am able to mine on f2pool,btcguild, no eligius yet (keeps disconnecting with same symptoms you are having).
|
|
|
|
novak@gekkoscience
|
|
November 19, 2014, 04:59:25 AM |
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
The controller is fundamentally broken. They do not work with most pools. Several pools actually changed to work with the faulty tube controllers. The bfgminer fix is not a good one, between bfgminer and the tube controllers you've got enough bugs to feed an army of anteaters. I'd stick to pools that work with the tube. If you really want to mine on an unsupported pool, you might be able to use slush's proxy, which is much more stable. There's a version I made that fixes the extranonce2 length issue, although it still does not work with pools which give the 'h not equal zero' error. linux only. http://www.gekkoscience.com/misc/mining_proxy.py-- novak
|
|
|
|
hagie
|
|
November 19, 2014, 07:38:57 AM |
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
I'm using bfgminer 4.7.2 with no problems using proxy. My start up is "bfgminer.exe -o stratum+tcp://uk1.ghash.io:3333 -u x -p x --stratum-port 3333 --set-device PXY:diff=512" I also am able to mine on f2pool,btcguild, no eligius yet (keeps disconnecting with same symptoms you are having). Ah ok - I discovered the Problem using eligius too. So it's pool dependend ?! Anyone here mine successful in eligius using a Asicminer Tube ? Anyone tried mining in eligius using Slushs Proxy or CKPool ? Regards Stefan
|
|
|
|
novak@gekkoscience
|
|
November 19, 2014, 11:29:13 AM |
|
Ah ok - I discovered the Problem using eligius too. So it's pool dependend ?!
Anyone here mine successful in eligius using a Asicminer Tube ?
Anyone tried mining in eligius using Slushs Proxy or CKPool ?
Regards Stefan
It is pool dependent. The BE controller has a bad stratum implementation, which does not work with all pools. I think Slush's proxy (the version I posted, dunno about default) and CKPool contain the extranonce2 length fix but if memory serves the error given by eligius is 'h not equal zero.' which requires bfgminer. I couldn't get bfgminer to run as a proxy for more than an hour without crashing. -- novak
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
November 20, 2014, 04:38:53 AM |
|
Yep, ckpool in proxy mode also fixes the extranonce2 issue. ckolivas worked that one up for us I think the first day we had Tubes to test with, but he's far too busy to try and fix all the issues with AM's stratum implementation.
Hopefully novak can get some of those USB adapters worked up and distributed soon. These things seem to behave much better on a real cgminer.
|
|
|
|
utbeauchamp
Newbie
Offline
Activity: 26
Merit: 0
|
|
November 25, 2014, 06:48:46 PM |
|
Hi,
I have an ASICMiner Tube that I want to use with CGMiner on Windows. I have a USB adapter that is from ASICMiner (like those sent with the Prisma). It is connected and recognized by Windows. I also used the Zadig utility to change the Driver to WinUSB. When I run cgminer, I get an error stating "USB init, open device failed, err -3, you don't have privilege to access - AMU device 3:1" Any insight into what I am doing wrong? Thank you for your help
|
|
|
|
Blazed
Casascius Addict
Legendary
Offline
Activity: 2128
Merit: 1119
|
|
November 25, 2014, 09:33:19 PM |
|
Are you running cgminer as admin? Try right clicking it and "run as administrator" Or disable UAC since that is a pain anyways.
|
|
|
|
daThomas
Newbie
Offline
Activity: 8
Merit: 0
|
|
March 28, 2016, 12:57:19 AM |
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
THIS EXACTLY! It's been frustrating the heck outta me the past several months. Older controller so I assume it's software is V1, as I've seen some on ebay that specify V2. I'm on slushes pool so did some looking there today and noticed the minimum difficulty for my worker was the default so set it up higher according to th table on the page. Will see if that helps. I tried a different cat5 cable just to rule that out. When it happens, like above, the first LED is flashing on the controller and it is not accessible on the network though the network plug light is on. Any thoughts on what I should try next? Thanks, Thomas
|
|
|
|
daThomas
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 07, 2016, 06:57:28 PM |
|
Hi all,
I bought 3 used asicminer tubes with BE-Controller for each. The run fine 24h in a pool like ghas.io but when I try to run a proxy based on BFGMiner , no difference if windows or linux, the miner or the controller suddelny stops workig. Sometimes the setup recovers on it's own, sometimes I have to unpower the controller and sometimes I have to unpower controller and the tubes.
If this happens only the first LED is flashing on the controller.
Does anyone have an Idea what I should change in the bfgminer config ?
Regards Stefan
THIS EXACTLY! It's been frustrating the heck outta me the past several months. Older controller so I assume it's software is V1, as I've seen some on ebay that specify V2. I'm on slushes pool so did some looking there today and noticed the minimum difficulty for my worker was the default so set it up higher according to th table on the page. Will see if that helps. I tried a different cat5 cable just to rule that out. When it happens, like above, the first LED is flashing on the controller and it is not accessible on the network though the network plug light is on. Any thoughts on what I should try next? Thanks, Thomas BUMP Does anyone have any insight into why the block erupter ethernet controller loses connection several times a day? Is there an update to this controller? Is there another option? Thanks, Thomas
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
April 07, 2016, 07:12:21 PM |
|
Did you ever try to run ck's modified ckproxy, or novak's modified slush proxy, which fixed some of the problems with ASICMiner's broken stratum implementation? I never tried BFG for proxy on a tube. I also never had an issue with the original controller connected to the above-mentioned proxies, or directly to slush's port set up for these. Then there's also the option to run cgminer and use a USB adapter, which should work on every pool.
For reference, I ran 31 of these in my hosting when they first came out; some of them stuck around for about 8 months and I didn't have the problems you're experiencing.
|
|
|
|
daddyfatsax
|
|
April 07, 2016, 07:37:52 PM |
|
My tube is running off BFG mining proxy with no issues.
|
|
|
|
kevinds
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 06, 2016, 01:44:17 AM |
|
Howdy,
I picked up a handful of these tubes (4), testing the boards one at a time for issues.. Been running great, one board seemed to get the controller to lock up frequently though (no web interface, not responding to pings), as others said above, it sometimes will clear on it's own or needs a power cycle.
My question is.. What are the data cables called? Or what are the ends called? Where can I order some.. haha
For example the power plugs on the boards are Molex 45558-0002 or Molex 45558-0003...
I am needing basically a replacement set of the UART signal cables, but I am not successful when searching for them...
One more question.. I saw in a manual for the Prismas, they connected the controller to the fan port on one of the boards.. Isn't this 12 volt? The controller says 5v on it.. Are there different versions of the controller? Or is 12volts ok for them? If so, where can I buy one of these cables.. haha
Still trying to decide if I should find PSUs for them or just sell them when I get the data cables sorted out...
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
November 06, 2016, 02:04:45 AM |
|
I've got a bunch of cables from them laying around. Also, the controller has an internal regulator that should be good up to about 15VDC input so it's not too worried there, it'll work off whatever you're feeding it.
|
|
|
|
|