[CLOSED] Prisma 1.4Th/s group buy @ 1.42 btc with coupon

[philipma1957]

still resisting the temptation to get one. not sure if i can hold out much longer

Give in Phil. You know you want to.

Ha ha I am amazed he has held out this long honestly. Phil you know you can not resist new fresh hardware...can you almost hear that loud fan calling your name?

other then spondoolies and bfl

I have owned just about all the gear ever made.

I am now at 6 s-3s. and  a bunch of coins. just waiting a bit  maybe oct 15th i will buy one.

I am interested in some S3s if you are wanting to sell some/all of them. 

maybe next month

[Swimmer63]

still resisting the temptation to get one. not sure if i can hold out much longer

Give in Phil. You know you want to.

Ha ha I am amazed he has held out this long honestly. Phil you know you can not resist new fresh hardware...can you almost hear that loud fan calling your name?

other then spondoolies and bfl

I have owned just about all the gear ever made.

I am now at 6 s-3s. and  a bunch of coins. just waiting a bit  maybe oct 15th i will buy one.

I am interested in some S3s if you are wanting to sell some/all of them. 

maybe next month

I'll be selling 10 S3's as soon as these Prisma's come in.

[sdjernes]

In for 3

TX ID: 628a11142fd6626d0954c2a6842bde7a8914dcab7285d32a8d7588cbf27399cf

Shipping label needs ship from address, will PM you.  I have to use UPS because the post office near my office likes to loose things and or ship them back to where "they" (think they came from).  UPS has only screwed up once and that was because Intel only put half an address on a package.

[CanaryInTheMine]

ASICMiner is working on shipping now... just waiting on tracking numbers etc..

[CanaryInTheMine]

Update on shipping: was told that tracking numbers are not yet available...
Will check on Monday again.  But as far as I know, shipments were initiated for our group.  I'll call DHL Monday as well.

[terrapinflyer]

Any update? I was waiting till you get them in to send the label so we know the actual weight. In your OP you say a 7-8lb label but it also says that each full unit weighs 7.5kg (~16lbs).

[CanaryInTheMine]

Any update? I was waiting till you get them in to send the label so we know the actual weight. In your OP you say a 7-8lb label but it also says that each full unit weighs 7.5kg (~16lbs).

Just waiting on a shipping update... Reached out today again.

[sidehack]

Not to threadjack, but anyone in need of power for these, I'll give 10% discount on any of our power products (including kits) to Canary GB people through the end of the month.
D750 (750W rated, 800W capable) and DPS-2000BB (2000W rated, 2400W capable) boards and PSUs and any cables (18" or 36" available). Orders paid by 3PM CST should ship the same day.

https://bitcointalk.org/index.php?topic=637595.msg8961301#msg8961301

https://bitcointalk.org/index.php?topic=503423

[vortexz]

I have ordered 10 prismas a while ago and I still have no tracking number
Do you guys got a tracking number ?
Thank you !

[CanaryInTheMine]

Not to threadjack, but anyone in need of power for these, I'll give 10% discount on any of our power products (including kits) to Canary GB people through the end of the month.
D750 (750W rated, 800W capable) and DPS-2000BB (2000W rated, 2400W capable) boards and PSUs and any cables (18" or 36" available). Orders paid by 3PM CST should ship the same day.

https://bitcointalk.org/index.php?topic=637595.msg8961301#msg8961301

https://bitcointalk.org/index.php?topic=503423

In case some of you did not know, Sidehack made a trip to pickup Tubes he is hosting (from prior Tube group); that's my kind of dedication
His stuff is quality made in USA.  I personally use his breakout boards too.

[dance191]

Not to threadjack, but anyone in need of power for these, I'll give 10% discount on any of our power products (including kits) to Canary GB people through the end of the month.
D750 (750W rated, 800W capable) and DPS-2000BB (2000W rated, 2400W capable) boards and PSUs and any cables (18" or 36" available). Orders paid by 3PM CST should ship the same day.

https://bitcointalk.org/index.php?topic=637595.msg8961301#msg8961301

https://bitcointalk.org/index.php?topic=503423

In case some of you did not know, Sidehack made a trip to pickup Tubes he is hosting (from prior Tube group); that's my kind of dedication
His stuff is quality made in USA.  I personally use his breakout boards too.

Klondike_bar has PCI-E connectors for about half the cost of Sidehacks, other people sell breakout boards for less.

[CanaryInTheMine]

While we await the Prismas, if anyone is looking to add hash power now: I just got 4 Tubes.  If interested, PM me.  They are in hand, ready to ship.  Do not fall for scammer PMs.
edit: only 2 Tubes remain

[chairforce1]

I now have tracking information for batch 1. I will update once I see movement.

Do this group buy have info for batch 1 as well? (I'm not part of any group buys)

[MikeMike]

2. Have ordered an A20, so wondering if you are working on an image for it? If no one starts this before I can get to it, I may start trying to port MinePeon to the device.

That would be great! I've already asked in the official Prisma and MinePeon threads about it, but no response (yet).

you can install your choice of OS image on the cubie and then install the cgminer on it...
I think cubie has a website with all kinds of software packages: http://cubieboard.org/download/

hope canary compile cgminer for this prisma using a10 or a20 cubie board

Hi Everyone,

Been awhile.

Glad to see this latest development of the Prisma!

Could someone help me put together the most economical, reliable
easy to setup and use controller that will work with multiple Prismas.

Any help would be most appreciated.
 

MM

[tripppn]

I'll wait and see what people think about these once they ship.  I dont want to have to run a stratum or whatever to get them to mine on most of the pools.  But if these work out right i'll prob pick up a couple.

[joeventura]

ROI is like 300 days.

If power is free

[CanaryInTheMine]

2. Have ordered an A20, so wondering if you are working on an image for it? If no one starts this before I can get to it, I may start trying to port MinePeon to the device.

That would be great! I've already asked in the official Prisma and MinePeon threads about it, but no response (yet).

you can install your choice of OS image on the cubie and then install the cgminer on it...
I think cubie has a website with all kinds of software packages: http://cubieboard.org/download/

hope canary compile cgminer for this prisma using a10 or a20 cubie board

Hi Everyone,

Been awhile.

Glad to see this latest development of the Prisma!

Could someone help me put together the most economical, reliable
easy to setup and use controller that will work with multiple Prismas.

Any help would be most appreciated.
 

MM

Old, no longer used laptop should work.  Prismas now have that USB interface and you can run cgminer.  No need for that BE controller.  Much simpler now

Edit: if you have a Pi you could also try that although I doubt you can run many prisma's successfuly on 1 Pi. (Cpu and USB bus issues)

[CanaryInTheMine]

I'll wait and see what people think about these once they ship.  I dont want to have to run a stratum or whatever to get them to mine on most of the pools.  But if these work out right i'll prob pick up a couple.

Not an issue using their USB interface.  In my group, I don't even bother with the BE controller.
Use cgminer, run whatever pool confit you want.

[CanaryInTheMine]

For your labels:

Box dimensions: 18x11x11

Weight: 16.5 lbs.

20 units are going out to the first 20 orders according to blockchain payments.  I've PMed the first 20.

When creating a label, check if price is the same for 16 lbs and 15 oz vs. 16.5 (.5 is 8 oz).
I suspect it's the same and recommend, in such a case, to specify 16lbs 15 oz to give yourselves plenty of spare room.

[CanaryInTheMine]

The majority of prismas I ordered have arrived.