philipma1957
Legendary
Offline
Activity: 4284
Merit: 8712
'The right to privacy matters'
|
|
October 21, 2014, 02:07:42 PM |
|
can the shipping label be sent as a pdf via email and printed out on your end?
he does that send him the pdf in an email.
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
October 21, 2014, 02:45:42 PM |
|
can the shipping label be sent as a pdf via email and printed out on your end?
Yes, that's my preferred method!
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
October 21, 2014, 10:07:16 PM |
|
Please use caution when unpacking your prismas as the unit may shift inside the foam capsule... I do not recommend pulling it out from one of the sides. Remove the side foam caps and then separate one of the lengthwise foam sides CAREFULLY and lift the prisma out of it's foam shell. You will see upon closer visual inspection that the lengthwise foam panels are glued at the corners. That would be a good place to separate them to get to the prisma.
I think there's a chance to snag a component if you just pull the tube out from the side of the foam casing.
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
October 22, 2014, 09:04:47 AM |
|
Please use caution when unpacking your prismas as the unit may shift inside the foam capsule... I do not recommend pulling it out from one of the sides. Remove the side foam caps and then separate one of the lengthwise foam sides CAREFULLY and lift the prisma out of it's foam shell. You will see upon closer visual inspection that the lengthwise foam panels are glued at the corners. That would be a good place to separate them to get to the prisma.
I think there's a chance to snag a component if you just pull the tube out from the side of the foam casing.
Surely they are in antistatic bags inside the foam casing
|
|
|
|
sidehack
Legendary
Offline
Activity: 3388
Merit: 1859
Curmudgeonly hardware guy
|
|
October 22, 2014, 06:51:43 PM |
|
Received my Prisma today. I had a bit of trouble with the USB adapter, I guess the most recent Windows build of cgminer doesn't have the blockerupter stuff integrated yet? But AM's specific release is working just fine. Lit up across a pair of our D750 PSUs currently.
Thanks for doing what you do, Canary.
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3836
Merit: 9047
https://bpip.org
|
|
October 23, 2014, 01:30:47 AM |
|
Please use caution when unpacking your prismas as the unit may shift inside the foam capsule... I do not recommend pulling it out from one of the sides. Remove the side foam caps and then separate one of the lengthwise foam sides CAREFULLY and lift the prisma out of it's foam shell. You will see upon closer visual inspection that the lengthwise foam panels are glued at the corners. That would be a good place to separate them to get to the prisma.
I think there's a chance to snag a component if you just pull the tube out from the side of the foam casing.
Surely they are in antistatic bags inside the foam casing Nope, no antistatic bag Unpacking wasn't a problem. Instead of trying to pull the device out, I was able to slide the outer foam "case" off, it did not touch the caps or anything, the miner has some foam spacers around it. I got it running with cgminer on Linux within about 10 minutes after connecting the cables, most of that time was to find the github link https://bitcointalk.org/index.php?topic=791827.msg9138614#msg9138614Some minor quality issues (fan screws loose), other than that I'm very impressed. 1400+ GH/S as advertised. It's pulling ~5 amps at 230V on EVGA 1300 G2 (80+ Gold).
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8712
'The right to privacy matters'
|
|
October 23, 2014, 01:42:03 AM |
|
Please use caution when unpacking your prismas as the unit may shift inside the foam capsule... I do not recommend pulling it out from one of the sides. Remove the side foam caps and then separate one of the lengthwise foam sides CAREFULLY and lift the prisma out of it's foam shell. You will see upon closer visual inspection that the lengthwise foam panels are glued at the corners. That would be a good place to separate them to get to the prisma.
I think there's a chance to snag a component if you just pull the tube out from the side of the foam casing.
Surely they are in antistatic bags inside the foam casing Nope, no antistatic bag Unpacking wasn't a problem. Instead of trying to pull the device out, I was able to slide the outer foam "case" off, it did not touch the caps or anything, the miner has some foam spacers around it. I got it running with cgminer on Linux within about 10 minutes after connecting the cables, most of that time was to find the github link https://bitcointalk.org/index.php?topic=791827.msg9138614#msg9138614Some minor quality issues (fan screws loose), other than that I'm very impressed. 1400+ GH/S as advertised. It's pulling ~5 amps at 230V on EVGA 1300 G2 (80+ Gold). nice do you use freq 240?
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3836
Merit: 9047
https://bpip.org
|
|
October 23, 2014, 02:01:05 AM |
|
nice do you use freq 240?
I did not pass any parameters, so yes, I think the default is 240.
|
|
|
|
terrapinflyer
|
|
October 23, 2014, 07:21:03 PM |
|
eta on your next batch? Im assuming that Im in batch 2
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3836
Merit: 9047
https://bpip.org
|
|
October 23, 2014, 07:56:07 PM |
|
nice do you use freq 240?
I did not pass any parameters, so yes, I think the default is 240. After about 12 hours I'm averaging this nice number: (avg):1.444Th/s And I found a BLOCK! Probably not bitcoin though and it's not mine (pun intended) anyway - rented out. [2014-10-23 20:49:30] Accepted 284f7bc2 Diff 416K/4571 BLOCK! BET 0 pool 0
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
October 23, 2014, 09:18:57 PM |
|
eta on your next batch? Im assuming that Im in batch 2
waiting on shipping update from AM...
|
|
|
|
stompysteve
|
|
October 23, 2014, 09:34:22 PM |
|
nice do you use freq 240?
I did not pass any parameters, so yes, I think the default is 240. After about 12 hours I'm averaging this nice number: (avg):1.444Th/s And I found a BLOCK! Probably not bitcoin though and it's not mine (pun intended) anyway - rented out. [2014-10-23 20:49:30] Accepted 284f7bc2 Diff 416K/4571 BLOCK! BET 0 pool 0 probably not bitcoin though???
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
October 24, 2014, 10:47:46 PM |
|
reminds me of philipma1957's story... nice do you use freq 240?
I did not pass any parameters, so yes, I think the default is 240. After about 12 hours I'm averaging this nice number: (avg):1.444Th/s And I found a BLOCK! Probably not bitcoin though and it's not mine (pun intended) anyway - rented out. [2014-10-23 20:49:30] Accepted 284f7bc2 Diff 416K/4571 BLOCK! BET 0 pool 0 probably not bitcoin though???
|
|
|
|
wasikidding
|
|
October 25, 2014, 01:45:49 AM |
|
Why was last post removed with the link to a website for orders was it removed off topic or for being scam related>?
|
BTC ADDY just in case you are my rich uncle lol 1KCQ4fXa3mWBvBsYRLmWY4QHqBa4ZYFdh6
|
|
|
suchmoon
Legendary
Offline
Activity: 3836
Merit: 9047
https://bpip.org
|
|
October 25, 2014, 02:43:25 AM |
|
Why was last post removed with the link to a website for orders was it removed off topic or for being scam related>?
You tell us, you are "buying" from them in the other thread, so you must know if it's a scam or not? Seriously, one noob buying from another noob without escrow... try harder.
|
|
|
|
wasikidding
|
|
October 25, 2014, 02:49:12 AM |
|
Why was last post removed with the link to a website for orders was it removed off topic or for being scam related>?
You tell us, you are "buying" from them in the other thread, so you must know if it's a scam or not? Seriously, one noob buying from another noob without escrow... try harder. Nice be a d* I simply stated on the other thread that I did make a purchase and did not recommend anyone else do the same yeah was a stupid move and asking the moderator of this thread why they removed the post is not a bad thing most of the time some indication of why is mentioned but you keep on enjoying, being an ass I'm sure it works well for ya. Secondly when most people use "quotes" they actually quote something in my other post the word "buying" is nowhere to be found and your extensive background since boomtime jan. 2014 makes you so much better then me, my lowly misguided newb self I appreciate your grizzled beaten response as your being taken for thousands by the likes of BFL etc has made you into the mentor and shining beacon you are to this community today.
|
BTC ADDY just in case you are my rich uncle lol 1KCQ4fXa3mWBvBsYRLmWY4QHqBa4ZYFdh6
|
|
|
philipma1957
Legendary
Offline
Activity: 4284
Merit: 8712
'The right to privacy matters'
|
|
October 25, 2014, 03:20:52 AM |
|
please I still have nightmares about the genesis-hashlets-nicehash-westhash incident. All because of the switch from cex.io to mmpool.org I never want to find out a million dollar problem again. reminds me of philipma1957's story... nice do you use freq 240?
I did not pass any parameters, so yes, I think the default is 240. After about 12 hours I'm averaging this nice number: (avg):1.444Th/s And I found a BLOCK! Probably not bitcoin though and it's not mine (pun intended) anyway - rented out. [2014-10-23 20:49:30] Accepted 284f7bc2 Diff 416K/4571 BLOCK! BET 0 pool 0 probably not bitcoin though???
|
|
|
|
CanaryInTheMine (OP)
Donator
Legendary
Offline
Activity: 2352
Merit: 1060
between a rock and a block!
|
|
October 25, 2014, 04:28:59 AM |
|
Why was last post removed with the link to a website for orders was it removed off topic or for being scam related>?
Response from AM: "shenzhenmining i dont know who they r. and they do not have goods for sure."
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3836
Merit: 9047
https://bpip.org
|
|
October 25, 2014, 04:34:43 AM |
|
Why was last post removed with the link to a website for orders was it removed off topic or for being scam related>?
Response from AM: "shenzhenmining i dont know who they r. and they do not have goods for sure." Thank you. It has already been dismantled as a scam in their thread.
|
|
|
|
wasikidding
|
|
October 25, 2014, 04:38:40 AM |
|
I wish AM would have been faster on there own thread to answer me and I guess this will be a 500$ lesson dam that sucks thanks canary for an answer
|
BTC ADDY just in case you are my rich uncle lol 1KCQ4fXa3mWBvBsYRLmWY4QHqBa4ZYFdh6
|
|
|
|