Okay, so my situation is a bit complex. I run
and I get:
..munin..GPU 0 is disabled..GPU 1..fan 1..OC 1..GPU 2..fan 2..OC 2..cgminer...
which looks good! But when I run
I get a lot of
Temp Fan% (rpm) Load Rate Accept/Invalid Status
0: 58c 100% (5487-) 85% Mhs / Low Mhs
1: 30.5c 50% (3330) 0% Mhs / Low Temp Low Load Low Mhs
2: 30.5c 50% (3289+) 0% Mhs / Low Temp Low Load Low Mhs
Total: 0 Mhash/s 0 accepted, 0 invalid
Time Total gpu0 gpu1 gpu2
11:49:03 0.00 0.00 0.00 0.00
11:49:05 0.00 0.00 0.00 0.00
11:49:07 0.00 0.00 0.00 0.00
11:49:09 0.00 0.00 0.00 0.00
11:49:12 0.00 0.00 0.00 0.00
11:49:14 0.00 0.00 0.00 0.00
11:49:16 0.00 0.00 0.00 0.00
11:49:18 0.00 0.00 0.00 0.00
11:49:20 0.00 0.00 0.00 0.00
11:49:23 0.00 0.00 0.00 0.00
11:49:25 0.00 0.00 0.00 0.00
11:49:27 0.00 0.00 0.00 0.00
11:49:29 0.00 0.00 0.00 0.00
11:49:31 0.00 0.00 0.00 0.00
11:49:34 0.00 0.00 0.00 0.00
11:49:36 0.00 0.00 0.00 0.00
11:49:38 0.00 0.00 0.00 0.00
So it looks like GPU's 2 and 3 (which are enabled) aren't doing anything. I've waited over 10 min watching this and waiting. So I dug around a bit and looked into the bamt.log file and here's the command that runs
May 6 11:45:50 kraken start_mining[9084]: starting cgminer with cmd: cd /opt/miners/cgminer;/usr/bin/screen -d -m -S cgminer /opt/miners/cgminer/cgminer --api-listen --api-port 4028 -o http://mymingpool.com:8332 -u myusername -p mypassword
so I figured, "hey, let me run the cgminer command myself and see what I get", so I run
/opt/miners/cgminer/cgminer --api-listen --api-port 4028 -o http://mymingpool.com:8332 -u myusername -p mypassword
and it runs and mines JUST fine, even using the first GPU (which I had disabled in my bamt.conf).
[P]ool management [G]PU management [Settings [D]isplay options [Q]uit
GPU 0: 499.9/508.3Mh/s | A:2 R:0 HW:0 U: 4.75/m I: 5
GPU 1: 211.3/210.4Mh/s | A:2 R:0 HW:0 U: 4.75/m I: 4
GPU 2: 210.8/210.1Mh/s | A:2 R:0 HW:0 U: 4.75/m I: 4
So what's going on here? Why can't the bamt
mine command get my GPU's to mine, but cgminer directly can.
Any help?