[ANN][ONE]1Coin|**UPDATE**|v1.2.2.1CPR|3S Algo|Faucet @ puredice.com

[getwork]

Noone wanna sell?

[DrBeer]

someone knows settings for CPU solo mining?
for standart setting (minerd3s.exe -o http://127.0.0.1:1997 -u username -p password) shows an error "HTTP request failed: Failed to connect to 127.0.0.1 port 1997: Connection refused."

[1coin.io]

someone knows settings for CPU solo mining?
for standart setting (minerd3s.exe -o http://127.0.0.1:1997 -u username -p password) shows an error "HTTP request failed: Failed to connect to 127.0.0.1 port 1997: Connection refused."

-server=1 in command line for 1coin-qt /1coind

or

server=1 in 1coin.conf config file

[DrBeer]

someone knows settings for CPU solo mining?
for standart setting (minerd3s.exe -o http://127.0.0.1:1997 -u username -p password) shows an error "HTTP request failed: Failed to connect to 127.0.0.1 port 1997: Connection refused."

-server=1 in command line for 1coin-qt /1coind
or
server=1 in 1coin.conf config file

Thanks !

[dreamtwo]

it  look  good  .it need a exchange

[capler]

linux binary don't work  

linux build

Code:

sudo apt-get install libssl-dev libdb-dev libdb++-dev make cmake automake libboost-all-dev build-essential git libcurl4-openssl-dev pkg-config libtool libncurses5-dev

git clone https://bitbucket.org/1coin/1coin-sgminer3s/src.git sgminer3s
cd sgminer3s
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure
make

[qwep]

why nobody optimizes miner for AMD 

[Theundertaker!]

GUY PLZ HELP BEEN MINING FROM START(SUPRANOVA POOL)  i am geting coins but my sgminer keep crashing iv tryed to put a backup pool but it dont change to it because it crash keep geting (waiting for work from pool) b4 the crash. but this error pop up ever 5-10 mins IS any1 fixing this?? or do any1 no why this keep crashing because iv lost 5 hours mining because of crash. PLZ HELP :}              LOVE THE NEW ALGO










IM ON WINDOWS 7 AMD 14.7 DRIVERS

[1coin.io]

GUY PLZ HELP BEEN MINING FROM START(SUPRANOVA POOL)  i am geting coins but my sgminer keep crashing iv tryed to put a backup pool but it dont change to it because it crash keep geting (waiting for work from pool) b4 the crash. but this error pop up ever 5-10 mins IS any1 fixing this?? or do any1 no why this keep crashing because iv lost 5 hours mining because of crash. PLZ HELP :}              LOVE THE NEW ALGO










IM ON WINDOWS 7 AMD 14.7 DRIVERS

i've updated the OP with a new binary windows build of sgminer3s with i586-mingw32msvc compiler instead of i686-w64-mingw32.

[antonio8]

GUY PLZ HELP BEEN MINING FROM START(SUPRANOVA POOL)  i am geting coins but my sgminer keep crashing iv tryed to put a backup pool but it dont change to it because it crash keep geting (waiting for work from pool) b4 the crash. but this error pop up ever 5-10 mins IS any1 fixing this?? or do any1 no why this keep crashing because iv lost 5 hours mining because of crash. PLZ HELP :}              LOVE THE NEW ALGO










IM ON WINDOWS 7 AMD 14.7 DRIVERS

Did you try the updated miner?

I was having the same issue where it would do that but so far so good (let me find some wood to knock on). I am also on Windows 7 but different driver so I don't think it is a driver issue.

[Odeyin]

I get about 25mh/s per card...still slower than what could be on S3.

[ivcelmik]

I get about 25mh/s per card...still slower than what could be on S3.

What type of card?

[xtrembash]

 ~40% speed increase algo with a bloc reward of 15
 = USELESS

 Total Coins 21 Million with BR 15
 = FAIL

[cnerd]

~40% speed increase algo with a bloc reward of 15
 = USELESS

 Total Coins 21 Million with BR 15
 = FAIL

please leave

[apocalypsevn]

My MSI 280x has only 6.4 Mhash/s.
I'm using Win 8.1 64 bit. Catalyst 14.6 RC2.
My config:
sgminer3s.exe -k 3s -o stratum+tcp://one.suprnova.cc:2323 -u x -p x -I 19 -w 256 --thread-concurrency 8192 --lookup-gap 2 -g 4 --shaders 2048 --gpu-engine 1150 --gpu-memclock 1500 --auto-fan --gpu-fan 55-80 --temp-cutoff 80 --temp-overheat 75 --temp-target 70 --no-submit-stale --no-pool-disable --api-listen --api-allow W:127.0.0.1 --expiry 1

 

[antonio8]

@ 1coin.eu

I tried the new gpu miner in the OP.

Ran fine for about 3 hours then I had the lock up again . I am puzzled at what is causing this.

I have no issues at all running my Nvidia cards but can't get the AMD to stay up and running.

Using Windows 7 64bit driver 13.12. I thought maybe driver issue but someone else posted same issue using driver 14.7 on Windows 7, though not sure if they are on 32 or 64 bit.

[Cryptosis]

GUY PLZ HELP BEEN MINING FROM START(SUPRANOVA POOL)  i am geting coins but my sgminer keep crashing iv tryed to put a backup pool but it dont change to it because it crash keep geting (waiting for work from pool) b4 the crash. but this error pop up ever 5-10 mins IS any1 fixing this?? or do any1 no why this keep crashing because iv lost 5 hours mining because of crash. PLZ HELP :}              LOVE THE NEW ALGO










IM ON WINDOWS 7 AMD 14.7 DRIVERS

What type of cards are you using? sounds to me like your pushing your cards to hard, you need to tweak to find optimal settings for your cards that don't crash the miner. ive found that just letting sgminer suggest settings and using that and changing to xI instead of using intensity

[1coin.io]

@ 1coin.eu

I tried the new gpu miner in the OP.

Ran fine for about 3 hours then I had the lock up again . I am puzzled at what is causing this.

I have no issues at all running my Nvidia cards but can't get the AMD to stay up and running.

Using Windows 7 64bit driver 13.12. I thought maybe driver issue but someone else posted same issue using driver 14.7 on Windows 7, though not sure if they are on 32 or 64 bit.

i think you should try 14.4 at least or maybe even 14.9
but it does sound more like a heat problem or maybe faulty hardware

[Cryptosis]

@ 1coin.eu

I tried the new gpu miner in the OP.

Ran fine for about 3 hours then I had the lock up again . I am puzzled at what is causing this.

I have no issues at all running my Nvidia cards but can't get the AMD to stay up and running.

Using Windows 7 64bit driver 13.12. I thought maybe driver issue but someone else posted same issue using driver 14.7 on Windows 7, though not sure if they are on 32 or 64 bit.

i think you should try 14.4 at least or maybe even 14.9
but it does sound more like a heat problem or maybe faulty hardware

Yea sounds tht way to me too, maybe the fan speed is not high enough allowing card to overheat. I've started a new miner before and not noticed the fan was barely running untill it overheated and crashed the comp.

I'm getting 9.3 Mh/s on my 290x bf4 an 3.6 Mh/s on hd7850. Didn't do much tweaking last night as I was late getting my cards launched but Today Im going try to tweak alittle more but overall the miners seem to be stable. One rig is running windows 8.1 x64 w 14.7 drivers and the other windows 7 x64 14.6 drivers

[antonio8]

@ 1coin.eu

I tried the new gpu miner in the OP.

Ran fine for about 3 hours then I had the lock up again . I am puzzled at what is causing this.

I have no issues at all running my Nvidia cards but can't get the AMD to stay up and running.

Using Windows 7 64bit driver 13.12. I thought maybe driver issue but someone else posted same issue using driver 14.7 on Windows 7, though not sure if they are on 32 or 64 bit.

i think you should try 14.4 at least or maybe even 14.9
but it does sound more like a heat problem or maybe faulty hardware

Yea sounds tht way to me too, maybe the fan speed is not high enough allowing card to overheat. I've started a new miner before and not noticed the fan was barely running untill it overheated and crashed the comp.

I'm getting 9.3 Mh/s on my 290x bf4 an 3.6 Mh/s on hd7850. Didn't do much tweaking last night as I was late getting my cards launched but Today Im going try to tweak alittle more but overall the miners seem to be stable. One rig is running windows 8.1 x64 w 14.7 drivers and the other windows 7 x64 14.6 drivers

Not faulty cards as this only happens with this miner and not heat issue. fans running at 75% on both cards and they are at 55° and 50°.

Pushing the cards to hard? Possibility here is my bat: --thread-concurrency 8192 -I 19 --worksize 256 -g 2 also both cards are at Core: 1050 and Mem: 1550

Getting 6.6 Mh/s on my 280X and 4.3 Mh/s on my 270X.