Help setting up merged mining on P2Pool

[Gladamas]

First of all I would like to say that I am not a complete noob when it comes to setting up software. However I cannot find a guide on how to set up merged mining on P2Pool (that is, Bitcoin, Namecoin, Devcoin, IXcoin, I0coin, [Liquidcoin? Litecoin?]). Something like this would be helpful, but I am running Windows 7, not Linux. Any help would be appreciated, thanks!

[Gladamas]

Bump

[mdude77]

First of all I would like to say that I am not a complete noob when it comes to setting up software. However I cannot find a guide on how to set up merged mining on P2Pool (that is, Bitcoin, Namecoin, Devcoin, IXcoin, I0coin, [Liquidcoin? Litecoin?]). Something like this would be helpful, but I am running Windows 7, not Linux. Any help would be appreciated, thanks!

I was able to get namecoin running for merged mining under windows.  I haven't found anything for the others.  But, IMHO, they are worthless currencies so I'm not losing much.

See here for installing and running: http://dot-bit.org/InstallAndConfigureNamecoin

And I use this GUI, although it's not perfect, it seems to work.  Mostly:  https://bitcointalk.org/index.php?topic=48737.0

That's only if you intend to run a server locally.  If you can't/won't setup a local server, I suggest using a public p2pool like p2pmining.com:

https://bitcointalk.org/index.php?topic=66202.0

M

[TCPC]

I know this post is pretty old, but I was also looking for a guide to setup P2Pool on Windows.  Did you ever have any luck setting yours up?  Or does anyone else know of a guide for windows?

[mdude77]

I know this post is pretty old, but I was also looking for a guide to setup P2Pool on Windows.  Did you ever have any luck setting yours up?  Or does anyone else know of a guide for windows?

My above post describes it all.  It works fine for me in windows 7.

M

[mokahless]

I know this post is pretty old, but I was also looking for a guide to setup P2Pool on Windows.  Did you ever have any luck setting yours up?  Or does anyone else know of a guide for windows?

My above post describes it all.  It works fine for me in windows 7.

M

But how did you set up the merged-mining part?

Edit: If anyone sees this and was looking because they had the question I did, it's an option in p2pool. "--merged"

[johnny5]

Is there any way to verify that a setup of p2pool is correctly merged mining?   I added in the --merged and the namecoind info, and on the p2pool console display, once in a while i now see "new merged mining work received" or something along those lines - but i never see anything else.  When i getinfo on namecoind, "hashespersec" : 0, is always at 0. 
Is there some way to verify it's indeed merged mining, locally?

[pyra-proxy]

Is there any way to verify that a setup of p2pool is correctly merged mining?   I added in the --merged and the namecoind info, and on the p2pool console display, once in a while i now see "new merged mining work received" or something along those lines - but i never see anything else.  When i getinfo on namecoind, "hashespersec" : 0, is always at 0. 
Is there some way to verify it's indeed merged mining, locally?

bump - I have this same question as I'm investigating now, seeing the same results as you as well...  Trying to get my head around p2pool and it's capabilities/limitations

[notme]

Is there any way to verify that a setup of p2pool is correctly merged mining?   I added in the --merged and the namecoind info, and on the p2pool console display, once in a while i now see "new merged mining work received" or something along those lines - but i never see anything else.  When i getinfo on namecoind, "hashespersec" : 0, is always at 0. 
Is there some way to verify it's indeed merged mining, locally?

bump - I have this same question as I'm investigating now, seeing the same results as you as well...  Trying to get my head around p2pool and it's capabilities/limitations

As long as it says "new merged mining work received" you are good to go.  There is no other indication to look for other than a chunk of coins when you find an altcoin block.

[mdude77]

Is there any way to verify that a setup of p2pool is correctly merged mining?   I added in the --merged and the namecoind info, and on the p2pool console display, once in a while i now see "new merged mining work received" or something along those lines - but i never see anything else.  When i getinfo on namecoind, "hashespersec" : 0, is always at 0. 
Is there some way to verify it's indeed merged mining, locally?

bump - I have this same question as I'm investigating now, seeing the same results as you as well...  Trying to get my head around p2pool and it's capabilities/limitations

As long as it says "new merged mining work received" you are good to go.  There is no other indication to look for other than a chunk of coins when you find an altcoin block.

the difficulty is really high on ixcoin and namecoin.  keep in mind when you merge mine with p2pool, you're using your hashpower only for the altcoins.  it'll likely be a while before you get a block.

M

[pyra-proxy]

Is there any way to verify that a setup of p2pool is correctly merged mining?   I added in the --merged and the namecoind info, and on the p2pool console display, once in a while i now see "new merged mining work received" or something along those lines - but i never see anything else.  When i getinfo on namecoind, "hashespersec" : 0, is always at 0. 
Is there some way to verify it's indeed merged mining, locally?

bump - I have this same question as I'm investigating now, seeing the same results as you as well...  Trying to get my head around p2pool and it's capabilities/limitations

As long as it says "new merged mining work received" you are good to go.  There is no other indication to look for other than a chunk of coins when you find an altcoin block.

the difficulty is really high on ixcoin and namecoin.  keep in mind when you merge mine with p2pool, you're using your hashpower only for the altcoins.  it'll likely be a while before you get a block.

M

Thanks, was curious about that part and assumed that was the case but still curious.  So I got all of them working (BTC, NMC, IXC) except DVC....  not sure why but that one always gives me failed to get auxblock messages (had to take each one out and add back in unfortunately to figure this out .... is there any better info for debugging?).  Is there something special about devcoin that I need to do in order to get it to merge mine properly?  My conf files are more or less very cookie cutter at this point.

[mdude77]

Is there any way to verify that a setup of p2pool is correctly merged mining?   I added in the --merged and the namecoind info, and on the p2pool console display, once in a while i now see "new merged mining work received" or something along those lines - but i never see anything else.  When i getinfo on namecoind, "hashespersec" : 0, is always at 0. 
Is there some way to verify it's indeed merged mining, locally?

bump - I have this same question as I'm investigating now, seeing the same results as you as well...  Trying to get my head around p2pool and it's capabilities/limitations

As long as it says "new merged mining work received" you are good to go.  There is no other indication to look for other than a chunk of coins when you find an altcoin block.

the difficulty is really high on ixcoin and namecoin.  keep in mind when you merge mine with p2pool, you're using your hashpower only for the altcoins.  it'll likely be a while before you get a block.

M

Thanks, was curious about that part and assumed that was the case but still curious.  So I got all of them working (BTC, NMC, IXC) except DVC....  not sure why but that one always gives me failed to get auxblock messages (had to take each one out and add back in unfortunately to figure this out .... is there any better info for debugging?).  Is there something special about devcoin that I need to do in order to get it to merge mine properly?  My conf files are more or less very cookie cutter at this point.

I only bother with IXCoin and Namecoin.  IIRC I couldn't find a reliable source for windows DVC, and considering the value of DVC is really really small, I didn't think it was worth the risk.

M

[notme]

Is there any way to verify that a setup of p2pool is correctly merged mining?   I added in the --merged and the namecoind info, and on the p2pool console display, once in a while i now see "new merged mining work received" or something along those lines - but i never see anything else.  When i getinfo on namecoind, "hashespersec" : 0, is always at 0. 
Is there some way to verify it's indeed merged mining, locally?

bump - I have this same question as I'm investigating now, seeing the same results as you as well...  Trying to get my head around p2pool and it's capabilities/limitations

As long as it says "new merged mining work received" you are good to go.  There is no other indication to look for other than a chunk of coins when you find an altcoin block.

the difficulty is really high on ixcoin and namecoin.  keep in mind when you merge mine with p2pool, you're using your hashpower only for the altcoins.  it'll likely be a while before you get a block.

M

Thanks, was curious about that part and assumed that was the case but still curious.  So I got all of them working (BTC, NMC, IXC) except DVC....  not sure why but that one always gives me failed to get auxblock messages (had to take each one out and add back in unfortunately to figure this out .... is there any better info for debugging?).  Is there something special about devcoin that I need to do in order to get it to merge mine properly?  My conf files are more or less very cookie cutter at this point.

Devcoin isn't any different.  Just make sure you don't have a typo in the username/password/port.