RchGrav
|
|
October 18, 2014, 11:49:08 PM Last edit: October 19, 2014, 12:04:59 AM by RchGrav |
|
I will wait until B1 ships before making a decision.
I ordered one last night just for the heck of it.. because my one friend was into ordering one.. so I said order one for me also. Total was 1.3722 BTC for everything* incl accessories... if you do the math its almost exactly the same as 2x S3+ at current pricing when you take shipping into account. I'm planning on using a .999 Silver Kill Coil ($6.99) and DI Water.I built a liquid cooled PC years ago, and I swore NEVER AGAIN.. just too much of a pain in the ass to maintain. Oh well.. *I reimbursed friend for the order in 100% BTC even though the accessories were paid via a different method by him. Please don't, you've just ordered a copper radiator with an aluminium block, right? I don't believe so. I ordered the recommended accessories linked from Bitmains Website from http://shop.syscooling.com/goods-45.htmlRadiator | AT360 Aluminum Radiator | Material | Aluminum |
Should I not use the silver + aluminum and go another way? Was hoping to make the setup as trouble free as possible. Liquid Cooling Sucks.. lol
|
4C 6F 6E 67 4C 69 76 65 42 69 74 63 6F 69 6E Qba'g lbh unir nalguvat orggre gb qb?
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 18, 2014, 11:57:19 PM |
|
No I ordered the recommended accessories linked from Bitmains Website from http://shop.syscooling.com/goods-45.htmlThey better not send a copper radiator!! Do you still see any issues with my cooling liquids and additives? It says aluminium but most radiators of this formfactor use copper channels internally so you can never be sure. The barbs are also [strangely] listing as having copper, so I wouldn't risk it.
|
|
|
|
RchGrav
|
|
October 19, 2014, 12:15:00 AM |
|
No I ordered the recommended accessories linked from Bitmains Website from http://shop.syscooling.com/goods-45.htmlThey better not send a copper radiator!! Do you still see any issues with my cooling liquids and additives? It says aluminium but most radiators of this formfactor use copper channels internally so you can never be sure. The barbs are also [strangely] listing as having copper, so I wouldn't risk it. Ugh.. WTF.. I looked at the specs of the recommended accessories linked from Bitmain, saw the word "Aluminum" and said great... I'm set. Why would I assume they would be offering proper accessories?!. If I can't use silver, can you even use DI with the proper additive? PT Nuke, something else? I would think the DI is the most reactive liquid possible to use since it is stripped of mineral ions. What is the BEST thing to use with the lowest amount of maintenance?
|
4C 6F 6E 67 4C 69 76 65 42 69 74 63 6F 69 6E Qba'g lbh unir nalguvat orggre gb qb?
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 19, 2014, 12:25:47 AM |
|
It says aluminium but most radiators of this formfactor use copper channels internally so you can never be sure. The barbs are also [strangely] listing as having copper, so I wouldn't risk it.
If I can't use silver, can you even use DI with the proper additive? PT Nuke, something else? I would think the DI is the most reactive liquid possible to use since it is stripped of mineral ions. What is the BEST thing to use with the lowest amount of maintenance? PT Nuke [which was replaced by PM Nuke wasnt it?] is just a biocide, its not going to stop the water corroding. Your best bet, as recommended is to get a premix coolant. Yes it costs $10 a litre, but its $10 rather than potentially having to replace $100 of components.
|
|
|
|
Gogreen
|
|
October 19, 2014, 01:05:57 AM |
|
What is the watt in total ? Watercooling and the c1 in one psu? 850w?
Yeah, 850-900W oh? Thanks
|
Bitcoin mining Antminer s7 4.7 TH Used in Good Condition Best Offer Prices @ ebay seller order directly here https://goo.gl/uaoh1r. Bitcoin payment optional.
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
October 19, 2014, 03:31:31 AM |
|
No I ordered the recommended accessories linked from Bitmains Website from http://shop.syscooling.com/goods-45.htmlThey better not send a copper radiator!! Do you still see any issues with my cooling liquids and additives? It says aluminium but most radiators of this formfactor use copper channels internally so you can never be sure. The barbs are also [strangely] listing as having copper, so I wouldn't risk it. this is the radiator bitmain suggested - i doubt it contains copper (more expensie than aluminum anyways) in contact with the fluid
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 19, 2014, 04:33:41 AM |
|
No I ordered the recommended accessories linked from Bitmains Website from http://shop.syscooling.com/goods-45.htmlThey better not send a copper radiator!! Do you still see any issues with my cooling liquids and additives? It says aluminium but most radiators of this formfactor use copper channels internally so you can never be sure. The barbs are also [strangely] listing as having copper, so I wouldn't risk it. this is the radiator bitmain suggested - i doubt it contains copper (more expensie than aluminum anyways) in contact with the fluid As I said, you can never be sure until you receive it as its pretty standard to coat the internal chambers with copper. What about the fittings listed as copper [again, probably coated]?
|
|
|
|
BitcoinRuinedMyLife
Member
Offline
Activity: 61
Merit: 10
|
|
October 19, 2014, 06:43:45 AM |
|
oh hooray!!
yet another shoddy, overpriced rig from bitmain....
such surprise, etc
Yeah, I am wondering what frequency these are clocked at so we know if there is any headroom at all.
|
|
|
|
dunand
|
|
October 19, 2014, 04:09:40 PM |
|
Do think a 850w gold power supply rated at 70A on 12v will be able to handle the C1? I know it will run at 100% capacity but I have no use for it otherwise.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
October 19, 2014, 05:39:07 PM |
|
Do think a 850w gold power supply rated at 70A on 12v will be able to handle the C1? I know it will run at 100% capacity but I have no use for it otherwise.
cutting it REALLY close - good chance you'll have to underclock in order to run stable, especially if the coolant pump draws an extra ~20w. IMO get a 1000W PSU and youll be fine, and your efficiency will be a bit better (most gold PSUs are ~91% efficient at 80% load, but only ~85% efficient at 100% load)
|
|
|
|
buysolar
Member
Offline
Activity: 125
Merit: 12
|
|
October 19, 2014, 09:13:23 PM |
|
More S1 upgrade kits please!
|
|
|
|
RealMalatesta
Legendary
Offline
Activity: 2338
Merit: 1124
|
|
October 19, 2014, 09:36:12 PM |
|
I think it will not be a problem to run three C1s with one strong pump... will give it a try :-)
|
|
|
|
wilth1
Member
Offline
Activity: 63
Merit: 10
|
|
October 19, 2014, 09:37:31 PM |
|
More S1 upgrade kits please!
Is it possible to just buy the boards for the C1?
|
|
|
|
junglecat
Newbie
Offline
Activity: 33
Merit: 0
|
|
October 19, 2014, 10:14:14 PM |
|
Do think a 850w gold power supply rated at 70A on 12v will be able to handle the C1? I know it will run at 100% capacity but I have no use for it otherwise.
Your efficiency will be shot. Add 20% more watts to stay around 80%.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
October 19, 2014, 10:38:05 PM |
|
I think it will not be a problem to run three C1s with one strong pump... will give it a try :-)
With the super cheap kits being sold I'm not sure there is a reason to. Removes all your redundancy with no benefit.
|
|
|
|
RealMalatesta
Legendary
Offline
Activity: 2338
Merit: 1124
|
|
October 19, 2014, 11:02:12 PM |
|
I think it will not be a problem to run three C1s with one strong pump... will give it a try :-)
With the super cheap kits being sold I'm not sure there is a reason to. Removes all your redundancy with no benefit. I agree. However, I still have a lot of old stuff here in my basement, so I'll only have to buy some fittings and new tubes. Especially with a 9-fan-radiator and a 1800l/h-pump, I guess it should be possible. In the worst case, one miner will be super-cool while the middle will be warm and the third one overheated...
|
|
|
|
BitcoinRuinedMyLife
Member
Offline
Activity: 61
Merit: 10
|
|
October 20, 2014, 12:55:14 AM |
|
Do think a 850w gold power supply rated at 70A on 12v will be able to handle the C1? I know it will run at 100% capacity but I have no use for it otherwise.
cutting it REALLY close - good chance you'll have to underclock in order to run stable, especially if the coolant pump draws an extra ~20w. IMO get a 1000W PSU and youll be fine, and your efficiency will be a bit better (most gold PSUs are ~91% efficient at 80% load, but only ~85% efficient at 100% load) What are these chips clocked with to begin with?
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
|
October 20, 2014, 05:31:08 AM |
|
I think it will not be a problem to run three C1s with one strong pump... will give it a try :-)
With the super cheap kits being sold I'm not sure there is a reason to. Removes all your redundancy with no benefit. I agree. However, I still have a lot of old stuff here in my basement, so I'll only have to buy some fittings and new tubes. Especially with a 9-fan-radiator and a 1800l/h-pump, I guess it should be possible. In the worst case, one miner will be super-cool while the middle will be warm and the third one overheated... Heh, we have a company we contract for that has a couple Techniwell TW700s sitting idle. I wonder how many one of those could run?
|
|
|
|
Experience101
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 20, 2014, 05:47:47 AM |
|
So if i may ask; whats the required wattage to run a single C1 without over clocking it and whats required to overclock it. Please and thank you..
|
|
|
|
seriouscoin
|
|
October 20, 2014, 05:58:58 AM |
|
I think it will not be a problem to run three C1s with one strong pump... will give it a try :-)
With the super cheap kits being sold I'm not sure there is a reason to. Removes all your redundancy with no benefit. I agree. However, I still have a lot of old stuff here in my basement, so I'll only have to buy some fittings and new tubes. Especially with a 9-fan-radiator and a 1800l/h-pump, I guess it should be possible. In the worst case, one miner will be super-cool while the middle will be warm and the third one overheated... As i said many pages ago, RUN THEM PARALLEL, god damn you noobs (also since the block channels are quite small 6mm, make a cheap manifold - 1/2" to 3 x 6mm tubing)
|
|
|
|
|