CCminer(SP-MOD) Modded GPU kernels.

[ASCiiDiTY]

Also please add the mem tweak options as seen in trex miner, like -mt 2 etc.. I can get better hash with this on my nvidia cards like p106-090 3GB and 1050 Ti 4GB.

If you have >=3gb cards, you can dual mine vertcoin+zil. Use your favorite ethereum miner with -mt parameter, and run spminer in a seperate window. Bether vertcoin hash speed on gddr5, gddr5x cards.

Zil dag size is only 1.2GB and mine 45 seconds every 1.5 hours.

Which pool to use for Zil? Just zil alone and not zil + ethash?

[sp_]

Which pool to use for Zil? Just zil alone and not zil + ethash?

you could try

zilminer
zil standalone
https://shardpool.io/

[sxemini]

Also please add the mem tweak options as seen in trex miner, like -mt 2 etc.. I can get better hash with this on my nvidia cards like p106-090 3GB and 1050 Ti 4GB.

If you have >=3gb cards, you can dual mine vertcoin+zil. Use your favorite ethereum miner with -mt parameter, and run spminer in a seperate window. Bether vertcoin hash speed on gddr5, gddr5x cards.

Zil dag size is only 1.2GB and mine 45 seconds every 1.5 hours.

Which pool to use for Zil? Just zil alone and not zil + ethash?

Zil DAG size is 1GB and not more, Zil stays always on epoch 0.

If you have AMD cards you can mine VTC+ZIL, ERG+ZIL, RVN+ZIL, XHV+ZIL with only 1 miner (SRBminer 0.7.3 and Nanominer). T-Rex Miner will also bring a Zil+RVN mode, and i think Zil+VTC also.

Don´t use zilminer and vtc miner at the same time, this can give much problems.

[ASCiiDiTY]

Also please add the mem tweak options as seen in trex miner, like -mt 2 etc.. I can get better hash with this on my nvidia cards like p106-090 3GB and 1050 Ti 4GB.

If you have >=3gb cards, you can dual mine vertcoin+zil. Use your favorite ethereum miner with -mt parameter, and run spminer in a seperate window. Bether vertcoin hash speed on gddr5, gddr5x cards.

Zil dag size is only 1.2GB and mine 45 seconds every 1.5 hours.

Which pool to use for Zil? Just zil alone and not zil + ethash?

Zil DAG size is 1GB and not more, Zil stays always on epoch 0.

If you have AMD cards you can mine VTC+ZIL, ERG+ZIL, RVN+ZIL, XHV+ZIL with only 1 miner (SRBminer 0.7.3 and Nanominer). T-Rex Miner will also bring a Zil+RVN mode, and i think Zil+VTC also.

Don´t use zilminer and vtc miner at the same time, this can give much problems.

I can't see any other way to do it then, because VTC is not supported in trex and I only have nvidia cards. SP said it was working with two windows open so I will try that and monitor it.

EDIT: can you take a look at this screenshot, does this look right? I assume it only starts hashing at this small window, when is that window? https://ibb.co/3R3WSXG

[skablast]

You can mine vtc with spminer+zil with whatever you want using zilswitcher and shardpool.io

There is a 3d here in the forum

the guys at shardpool telegram chat  will help you setup it for your need but is not that difficult

[sxemini]

Also please add the mem tweak options as seen in trex miner, like -mt 2 etc.. I can get better hash with this on my nvidia cards like p106-090 3GB and 1050 Ti 4GB.

If you have >=3gb cards, you can dual mine vertcoin+zil. Use your favorite ethereum miner with -mt parameter, and run spminer in a seperate window. Bether vertcoin hash speed on gddr5, gddr5x cards.

Zil dag size is only 1.2GB and mine 45 seconds every 1.5 hours.

Which pool to use for Zil? Just zil alone and not zil + ethash?

Zil DAG size is 1GB and not more, Zil stays always on epoch 0.

If you have AMD cards you can mine VTC+ZIL, ERG+ZIL, RVN+ZIL, XHV+ZIL with only 1 miner (SRBminer 0.7.3 and Nanominer). T-Rex Miner will also bring a Zil+RVN mode, and i think Zil+VTC also.

Don´t use zilminer and vtc miner at the same time, this can give much problems.

I can't see any other way to do it then, because VTC is not supported in trex and I only have nvidia cards. SP said it was working with two windows open so I will try that and monitor it.

EDIT: can you take a look at this screenshot, does this look right? I assume it only starts gashing at this small window, when is that window? https://ibb.co/3R3WSXG

It can´t work good with 2 miners at the same time. You will see  that your vtc hashrate goes down if zilliqa start mining and your zilliqa hashrate is also lower, because you mining 2 memory bandwith coins at the same time.

I said that t-rex is working on such mode, not available yet.

You can use zilswitcher to mine vtc+zil with 2 miners, but only 1 work at the same time. This is the better way in my opinion or wait until more miners have vtc+zil functions.

Or buy AMD cards  

EDIT: Yes your screenshot looks right, but why your are not using the spminer for verthash? Can you give us your zil hashrate and if zil mining your vtc hashrate?

[ASCiiDiTY]

Also please add the mem tweak options as seen in trex miner, like -mt 2 etc.. I can get better hash with this on my nvidia cards like p106-090 3GB and 1050 Ti 4GB.

If you have >=3gb cards, you can dual mine vertcoin+zil. Use your favorite ethereum miner with -mt parameter, and run spminer in a seperate window. Bether vertcoin hash speed on gddr5, gddr5x cards.

Zil dag size is only 1.2GB and mine 45 seconds every 1.5 hours.

Which pool to use for Zil? Just zil alone and not zil + ethash?

Zil DAG size is 1GB and not more, Zil stays always on epoch 0.

If you have AMD cards you can mine VTC+ZIL, ERG+ZIL, RVN+ZIL, XHV+ZIL with only 1 miner (SRBminer 0.7.3 and Nanominer). T-Rex Miner will also bring a Zil+RVN mode, and i think Zil+VTC also.

Don´t use zilminer and vtc miner at the same time, this can give much problems.

I can't see any other way to do it then, because VTC is not supported in trex and I only have nvidia cards. SP said it was working with two windows open so I will try that and monitor it.

EDIT: can you take a look at this screenshot, does this look right? I assume it only starts gashing at this small window, when is that window? https://ibb.co/3R3WSXG

It can´t work good with 2 miners at the same time. You will see  that your vtc hashrate goes down if zilliqa start mining and your zilliqa hashrate is also lower, because you mining 2 memory bandwith coins at the same time.

I said that t-rex is working on such mode, not available yet.

You can use zilswitcher to mine vtc+zil with 2 miners, but only 1 work at the same time. This is the better way in my opinion or wait until more miners have vtc+zil functions.

Or buy AMD cards  

EDIT: Yes your screenshot looks right, but why your are not using the spminer for verthash? Can you give us your zil hashrate and if zil mining your vtc hashrate?

It works.. yes hashrate goes down by a lot but only for 45 seconds and seems stable in zilminer. I will try it for a week and see what happens.

I am using spminer, but not on that PC, it is my workstation where I was resting zil+vtc: https://ibb.co/VN9FDKP

Here is screenshot of it when zil starts hashing: https://ibb.co/qgMrpxP

EDIT: I will try out zilswitcher as well, cool program, thanks.

[sxemini]

It works.. yes hashrate goes down by a lot but only for 45 seconds and seems stable in zilminer. I will try it for a week and see what happens.

I am using spminer, but not on that PC, it is my workstation where I was resting zil+vtc: https://ibb.co/VN9FDKP

Here is screenshot of it when zil starts hashing: https://ibb.co/qgMrpxP

EDIT: I will try out zilswitcher as well, cool program, thanks.

And now you see the problem. The GTX1050ti can do around 13mh on zil (without mem tweaks), with the right miner it can do 14 - 17 mh on zil depends on memory manufacturer on your card.

[sp_]

But it works.

1 gtx 1050ti (4gb)

Mining verthash+zil +$ 0.06
Mining verthash+zil with switch software +$0.12

So mining vertcoin with the spminer and zilminer in the background can increase the profit

[sxemini]

But it works.

1 gtx 1050ti (4gb)

Mining verthash+zil +$ 0.06
Mining verthash+zil with switch software +$0.12

So mining vertcoin with the spminer and zilminer in the background can increase the profit

Sure sure but the better way is to use switcher or miner that switch automatically. And i tried your way in the beginning of zilminer with other algos and it brings some problems.
I am support zilliqa since the first block and love this coin

And i am happy to see more and more miners support this, and i love to see that the mining community found that fixed vgpu is better than to adjust Powerlimits for Nvidiacards. I have been using fixed gpu voltage for 2 years  
 

[ASCiiDiTY]

But it works.

1 gtx 1050ti (4gb)

Mining verthash+zil +$ 0.06
Mining verthash+zil with switch software +$0.12

So mining vertcoin with the spminer and zilminer in the background can increase the profit

Sure sure but the better way is to use switcher or miner that switch automatically. And i tried your way in the beginning of zilminer with other algos and it brings some problems.
I am support zilliqa since the first block and love this coin

And i am happy to see more and more miners support this, and i love to see that the mining community found that fixed vgpu is better than to adjust Powerlimits for Nvidiacards. I have been using fixed gpu voltage for 2 years  
 

Thanks for the help. I have set up the switcher on both rigs now and see result quickly from one rig, 14mh on the 1050 ti like you say: https://ibb.co/JC7trcZ

Yep I'm undervolting all to 825mv.

I have more cards to add soon, my old mobo broke and my spare has only 3 cards possible, later this week a new 8 card mobo will arrive, total of 9 cards on VTC + ZIL then.

[skablast]

using your  start_miningpoolhub.bat

we have to substitute in:

-u sp.%computername%

computername

with the name we have registered at mining poolhub ?

and thats it ?

[sp_]

You need to create a user and replace sp with your username in the batfile.


SPMiner 3 for vertcoin released 21-april-2021  (~1% fee)
Opencl/cuda

- Stratum rewritten for smoother switching.
- Use less memory
- Stability fixes
- Try to fix r9 280x



https://github.com/sp-hash/SPMiner/releases

06200df2fc53797b7324015aad630a57c59804f8e4617c0bd782ccc208025157
spminer3.7z

I just fired up my Firepro s10000 it's getting an excellent 779kH/s with stock clocks, however it has the same issue as the R9 280x's. This is in my main Ryzen 7, 16gb system, so it can't be a system issue.

Can you try #3 please.

Should be more stable and use much less memory. The workaround with #2 is to use a 4gb card in the rig, but #3 should work standalone


Planning a linux build on sunday.

Almost there...

Sure sure but the better way is to use switcher or miner that switch automatically. And i tried your way in the beginning of zilminer with other algos and it brings some problems.

In spminer #3 the exe is using minimal memory in order to support dual mining. I will make an optional ZIL switch wich will pause the vertcoin mining while zil is active (45 seconds every 1.5 hours)

[moderator's note: consecutive posts merged]

[ASCiiDiTY]

SPMiner 3 for vertcoin released 21-april-2021  (~1% fee)
Opencl/cuda

- Stratum rewritten for smoother switching.
- Use less memory
- Stability fixes
- Try to fix r9 280x



https://github.com/sp-hash/SPMiner/releases

06200df2fc53797b7324015aad630a57c59804f8e4617c0bd782ccc208025157
spminer3.7z

Not working well for p106 rig, lower hashrate and huge rejected shares: https://ibb.co/QQdmrBD

Still SPminer#1 remains the best for this rig.

Please add ZIL switch to SPminer #1.

[sp_]

Not working well for p106 rig, lower hashrate and huge rejected shares:

This is an old bug. When loading the file into gpumemory with more than 2 gpu's, 2 core celeron and 4gb memory it lags abit. But it's only happening at startup.

Still SPminer#1 remains the best for this rig.

Kernel #1 was tuned for pascal cards and cuda 10.2
Kernel #2 was tuned for rtx cards and cuda 11.2

I will try to include them both in the same build. Or build a seperate cuda 10.2 version.

[sxemini]

Hey sp_

i can´t connect to zergpool or to mining-dutch. Same problem as in the previous version.

F2pool work, hashalot work also.

[scryptr]

I MINE WITH LINUX--

Here is what I posted on the TeamRedMiner Discord today:

"scryptr — Today at 8:16 AM

I have 4X Nitro+ 4GB RX580 w/Elpida.  Clocks 1250/1870, hash 540kH/s per GPU.  Seems stable overnight.
I get some rejects, wheras mining Haven (XHV) I had near 0 yesterday with TRM 8.
Currently 2 rejects out of 180 accepts, ~1%
The straight-to-memory verthash.dat is a really nice touch."

This was performed on an ethOS rig with older AMD drivers.  It is a modded Ubuntu 14.04 based system.  The developers abandoned the system.

My 1050ti cards are mining UBQ at about 13.5MH/s per card with PhoenixMiner 5.5c in an ethOS rig.  They are steady with near zero rejects.  ZergPool rates UBQ more profitable than VTC.  I am mining both coins on ZergPool (using ethOS) and will compare for myself.

The VertHash free miner will not run on ethOS, it calls for libraries not present.  Please make a static build capable of running on the older linux system.  TRM works well on ethOS, but only runs on AMD cards.  TRM just released v8.2 with VTC today.

--scryptr

[sp_]

Working on spminer #4

Faster start(5 seconds), fewer rejects, ZIL support. +++

And Linux support

Not working alone anymore. Supported by Team Black (www.pouet.net)

[skablast]

I can't use your suggested cores setting because energy doesn't come cheap here, so I stick with 1190/840 2090/840 with Matthews straps for eth/Monero

I tested your spminer3 and trm,(and srbminer) with the same setting on the same 6 "sisters" rx 570 itx elpida cards at the same time using 3 accounts.

TRM seem to be faster than your 488 Khs/ cards just going a little over 500....................................with SRB coming 3rd

But surprise surprise. miningpoolhub just see the opposite and paid accordingly!  gGving spminer card a 10% $$ advantage compared to the other two.
It was 24 hour, so it can't be luck. And its enough clear for me.

only weird thing? your 1 % seem to be 1 % but it comes in a weird way in one big shot

But from tomorrow, you know what I am using right ?
Unless etc keep increasing, of course...

[sp_]

I can't use your suggested cores setting because energy doesn't come cheap here, so I stick with 1190/840 2090/840 with Matthews straps for eth/Monero

The card in the picture is using 120watt in the wall. Sapphire nitro+ rx 580 Polaris bios editor 1 click strap. -20% powerlimit in MSI afterburner. Latest adrenaline driver